Flury, Simon; Dulla, Fabrice Alain; Peutzfeldt, Anne; Lussi, Adrian (6 October 2017). Repair Bond Strength of Resin Composite to Various Restorative Materials (Unpublished). In: Academy of Dental Materials (ADM) Annual Meeting. Nuremberg, Germany. 05.-07.10.2017.
|
Text
ADM_2017_Flury.pdf - Other Available under License BORIS Standard License. Download (1MB) | Preview |
Purpose: To investigate the repair bond strength (RBS) of a resin composite to six restorative materials either mediated by application of a silane and a bonding agent or by application of a universal adhesive.
Methods and Materials: Thirty specimens were produced from each restorative material: an amalgam alloy (ORALLOY MAGICAP S), a direct resin composite (Filtek Z250), two indirect resin composites (Paradigm MZ100 and Lava Ultimate), a hybrid ceramic (VITA ENAMIC), and a feldspar ceramic (VITABLOCS Mark II). The specimens were stored for 3 months in tap water (37°C) for artificial ageing. After storage, the surfaces of all specimens were sandblasted (aluminum oxide, grain size: 25 μm), water-sprayed, and air-dried. Subsequently, the surfaces of half of the specimens (n=15/restorative material) were treated with a silane (Monobond Plus) followed by application of a bonding agent (OptiBond FL Adhesive) whereas the other half was treated with a universal adhesive only (Scotchbond Universal). A resin composite (Filtek Z250) was applied as repair material on the treated surfaces and the specimens were stored for 24 hours (37°C, 100% humidity). Then, RBS was measured by means of a shear bond strength test. Due to normally distributed data (Shapiro Wilk’s test: p=0.216), RBS-values were analyzed with a parametric ANOVA and two-sample t-tests. The p-values were corrected with Bonferroni-Holm adjustment for multiple testing (significance level: α=0.05).
Results: Mean values (standard deviations) (MPa; Monobond Plus and OptiBond FL Adhesive / Scotchbond Universal) were: 18.6 (3.2) / 17.2 (3.1) for ORALLOY MAGICAP S, 19.8 (3.9) / 17.0 (3.5) for Filtek Z250, 19.9 (3.2) / 17.6 (3.7) for Paradigm MZ100, 20.5 (4.2) / 18.1 (4.6) for Lava Ultimate, 23.9 (5.0) / 17.1 (3.2) for VITA ENAMIC, and 22.3 (4.3) / 12.5 (4.9) for VITABLOCS Mark II. For VITA ENAMIC and VITABLOCS Mark II, treatment with Monobond Plus and OptiBond FL Adhesive showed a significantly higher RBS than did treatment with Scotchbond Universal (p≤0.0009). For the other four restorative materials, RBS did not significantly differ between the two treatments (p≥0.207).
Conclusion: Clinically (with the exception of amalgam alloy), the material of a restoration to be repaired may be unknown. Consequently, when repairing restorations with resin composite it seems advisable to use a silane followed by a bonding agent since for two out of the six restorative materials investigated, the use of a universal adhesive showed lower repair bond strength.
Item Type: |
Conference or Workshop Item (Poster) |
|---|---|
Division/Institute: |
04 Faculty of Medicine > School of Dental Medicine > Department of Preventive, Restorative and Pediatric Dentistry |
UniBE Contributor: |
Flury, Simon, Peutzfeldt, Anne, Lussi, Adrian |
Subjects: |
600 Technology > 610 Medicine & health |
Language: |
English |
Submitter: |
Simon Flury |
Date Deposited: |
17 Nov 2017 14:05 |
Last Modified: |
05 Dec 2022 15:07 |
BORIS DOI: |
10.7892/boris.106138 |
URI: |
https://boris.unibe.ch/id/eprint/106138 |
Actions (login required)
 |
Edit item |