Analysis of 14 C-bearing compounds released by the corrosion of irradiated steel using accelerator mass spectrometry

Cvetković, B. Z.; Salazar Quintero, Gary Abdiel; Kunz, D.; Szidat, Sönke; Wieland, E. (2018). Analysis of 14 C-bearing compounds released by the corrosion of irradiated steel using accelerator mass spectrometry. Analyst, 143(13), pp. 3059-3067. Royal Society of Chemistry 10.1039/c8an00237a

	Text Cvetkovic_Liquid 14C release from radioactive waste (Analyst 2018).pdf - Published Version Restricted to registered users only Available under License Publisher holds Copyright. Download (1MB)
Preview	Text Cvetkovic et al 2018_Analysis of 14C-bearing compounds released by the corrosion of irradiated steel using accelerator mass spectrometry.pdf - Accepted Version Available under License Publisher holds Copyright. Download (631kB) | Preview

The combination of ion chromatography (IC) with accelerator mass spectrometry (AMS) was developed to determine the speciation of 14C-(radiocarbon) bearing organic compounds in the femto to pico molar concentration range. The development of this compound-specific radiocarbon analysis (CSRA) of carboxylic acids is reported and the application of the method on a leaching solution from neutron-irradiated steel is demonstrated. The background and the dynamic range of the AMS-based method were quantified. On using 14C-labelled standards, the measurements demonstrate the repeatability of the analytical method and the reproducible recovery of the main target carboxylic acids (i.e., acetate, formate, malonate, and oxalate). The detection limit was determined to be in the mid fmol 14C per L level while the dynamic range of the analytical method covers three orders of magnitude from the low fmol to the mid pmol 14C per L level. Cross contamination was found to be negligible during IC fractionation and was accounted for during eluate processing and 14C detection by AMS. The 14C-bearing carboxylates released from an irradiated steel nut into an alkaline leaching solution were analysed using the CSRA-based analytical method with the aim to check the applicability of the approach and develop appropriate sample preparation. The concentrations of 14C-bearing formate and acetate, the main organic corrosion products, were at a low pmol 14C per L level for convenient dimensions of the alkaline leaching experiment which demonstrates that compound-specific 14C AMS is an extremely sensitive analytical method for analysing 14C-bearing compounds. The content of total organic 14C in solution (TO14C) determined by the direct measurement of an aliquot of the leaching solution agrees well with the sum of the 14C concentrations of the individual carboxylates within the uncertainty of the data. Furthermore, the TO14C content is in good agreement with the calculated value using the corrosion rate determined from the 60Co release and the 14C inventory of the irradiated steel specimen.

Interest & Impact

Downloads

267 since deposited on 06 Jun 2018
17 in the past 12 months

Citations

5 Citations in Web of Science ®
6 Citations in Scopus

Search

in Google Scholar™

Services

Actions (login required)

Edit item

Actions (login required)

Edit item