Isotope independent determination of PET/CT modulation transfer functions from phantom measurements on spheres.

Prenosil, George; Klaeser, Bernd; Hentschel, Michael; Fürstner, Markus; Berndt, Michael; Krause, Thomas Michael; Weitzel, Thilo (2016). Isotope independent determination of PET/CT modulation transfer functions from phantom measurements on spheres. Medical physics, 43(10), pp. 5767-5778. American Association of Physicists in Medicine AAPM 10.1118/1.4963217

[img]
Preview
Text
Isotope independent determination of PETCT modulation transfer functions from phantom measurements on spheres.pdf - Published Version
Available under License Creative Commons: Attribution (CC-BY).

Download (3MB) | Preview

PURPOSE

A PET/CT system's imaging capabilities are best described by its point spread function (PSF) in the spatial domain or equivalently by its modulation transfer function (MTF) in the spatial frequency domain. Knowing PSFs or MTFs is a prerequisite for many numerical methods attempting to improve resolution and to reduce the partial volume effect. In PET/CT, the observed PSF is a convolution of the system's intrinsic imaging capabilities including image reconstruction (PSF0) and the positron range function (PRF) of the imaged β(+) emitting isotope. A PRF describes the non-Gaussian distribution of β(+) annihilation events around a hypothetical point source. The main aim was to introduce a new method for determining a PET/CT system's intrinsic MTF (MTF0) from phantom measurements of hot spheres independently of the β(+) emitting isotope used for image acquisition. Secondary aim was to examine non-Gaussian and nonlinear MTFs of a modern iterative reconstruction algorithm.

METHODS

PET/CT images of seven phantom spheres with volumes ranging from 0.25 to 16 ml and filled either with (18)F or with (68)Ga were acquired and reconstructed using filtered back projection (FBP). MTFs were modeled with linear splines. The spline fit iteratively minimized the mean squared error between the acquired PET/CT image and a convolution of the thereof derived PSF with a numerical representation of the imaged hot phantom sphere. For determining MTF0, the numerical sphere representations were convolved with a PRF, simulating a fill with either (18)F or (68)Ga. The MTFs determined by this so-called MTF fit method were compared with MTFs derived from point source measurements and also compared with MTFs derived with a previously published PSF fit method. The MTF fit method was additionally applied to images reconstructed by a vendor iterative algorithm with PSF recovery (Siemens TrueX).

RESULTS

The MTF fit method was able to determine (18)F and (68)Ga dependent MTFs and MTF0 from FBP reconstructed images. Root-mean-square deviation between fit determined MTFs and point source determined MTFs ranged from 0.023 to 0.039. MTFs from Siemens TrueX reconstructions varied with size of the imaged sphere.

CONCLUSIONS

MTF0 can be determined regardless of the imaged isotope, when using existing PRF models for the MTF fit method presented. The method proves that modern iterative PET/CT reconstruction algorithms have nonlinear imaging properties. This behaviour is not accessible by point source measurements. MTFs resulting from these clinically applied algorithms need to be estimated from objects of similar geometry to those intended for clinical imaging.

Item Type:

Journal Article (Original Article)

Division/Institute:

04 Faculty of Medicine > Department of Radiology, Neuroradiology and Nuclear Medicine (DRNN) > Clinic of Nuclear Medicine

UniBE Contributor:

Prenosil, George, Klaeser, Bernd, Hentschel, Michael, Fürstner, Markus, Krause, Thomas Michael, Weitzel, Thilo

Subjects:

600 Technology > 610 Medicine & health

ISSN:

0094-2405

Publisher:

American Association of Physicists in Medicine AAPM

Language:

English

Submitter:

Franziska Nicoletti

Date Deposited:

07 Feb 2017 10:53

Last Modified:

05 Dec 2022 15:01

Publisher DOI:

10.1118/1.4963217

PubMed ID:

27782715

BORIS DOI:

10.7892/boris.93038

URI:

https://boris.unibe.ch/id/eprint/93038

Actions (login required)

Edit item Edit item
Provide Feedback