 | Up a level |
Revilla-León, Marta; Gómez-Polo, Miguel; Barmak, Abdul B; Kois, John C; Yilmaz, Burak; Alonso Pérez-Barquero, Jorge (2024). Influence of occlusal collision corrections completed by two intraoral scanners or a dental design program on the accuracy of the maxillomandibular relationship. The journal of prosthetic dentistry, 132(1), pp. 191-203. Elsevier 10.1016/j.prosdent.2023.05.015
Scherer, Michael D; Al-Haj Husain, Nadin; Barmak, Abdul B; Kois, John C; Özcan, Mutlu; Revilla-León, Marta (2024). Influence of postprocessing rinsing solutions and duration on flexural strength of aged and nonaged additively manufactured interim dental material. The journal of prosthetic dentistry, 131(5), pp. 959-968. Elsevier 10.1016/j.prosdent.2022.03.034
Revilla-León, Marta; Gómez-Polo, Miguel; Barmak, Abdul B; Yilmaz, Burak; Kois, John C; Alonso Pérez-Barquero, Jorge (2024). Influence of scan extension and starting quadrant on the accuracy of four intraoral scanners for fabricating tooth-supported crowns. (In Press). The journal of prosthetic dentistry Elsevier 10.1016/j.prosdent.2024.03.017
Guirao, Sergi; Llansana, Ferran; Button, Heather; Yilmaz, Burak; Kois, John C; Revilla-León, Marta (2023). Additively manufactured devices with varying designs and sizes for acquiring initial intraoral implant scans. Journal of prosthodontics, 32(S2), pp. 181-185. Wiley 10.1111/jopr.13750
Revilla-León, Marta; Lanis, Alejandro; Yilmaz, Burak; Kois, John C; Gallucci, German O (2023). Intraoral digital implant scans: Parameters to improve accuracy. Journal of prosthodontics, 32(S2), pp. 150-164. Wiley 10.1111/jopr.13749
Donmez, Mustafa Borga; Gómez-Polo, Miguel; Çakmak, Gülce; Yilmaz, Burak; Revilla-León, Marta (2023). Influence of implant scan body design (height, diameter, geometry, material, and retention system) on intraoral scanning accuracy: A systematic review. Journal of prosthodontics, 32(S2), pp. 165-180. Wiley 10.1111/jopr.13774
Revilla-León, Marta; Barmak, Abdul B; Tohme, Hani; Yilmaz, Burak; Kois, John C; Gómez-Polo, Miguel (2023). Factors that influence the accuracy of maxillomandibular relationship at maximum intercuspation acquired by using intraoral scanners: A systematic review. Journal of dentistry, 138(104718), p. 104718. Elsevier 10.1016/j.jdent.2023.104718
Donmez, Mustafa Borga; Çakmak, Gülce; Dede, Doğu Ömür; Küçükekenci, Ahmet Serkan; Lu, Wei-En; Schumacher, Fernanda; Revilla-León, Marta; Yilmaz, Burak (2023). Effect of scan powder and scanning technology on measured deviations of complete-arch implant supported frameworks digitized with industrial and intraoral scanners. Journal of dentistry, 138, p. 104736. Elsevier Science 10.1016/j.jdent.2023.104736
Kois, John C; Zeitler, Jonathan M; Barmak, Abdul B; Yilmaz, Burak; Gómez-Polo, Miguel; Revilla-León, Marta (2023). Discrepancies in the occlusal devices designed by an experienced dental laboratory technician and by 2 artificial intelligence-based automatic programs. (In Press). The journal of prosthetic dentistry Elsevier 10.1016/j.prosdent.2023.08.015
Revilla-León, Marta; Yilmaz, Burak; Kois, John C; Att, Wael (2023). Prevention of peri-implant disease in edentulous patients with fixed implant rehabilitations. Clinical implant dentistry and related research, 25(4), pp. 743-751. Wiley 10.1111/cid.13182
Han, Sangjun; Yi, Yuseung; Revilla-León, Marta; Yilmaz, Burak; Yoon, Hyung-In (2023). Feasibility of software-based assessment for automated evaluation of tooth preparation for dental crown by using a computational geometric algorithm. Scientific Reports, 13(1), p. 11847. Nature Publishing Group 10.1038/s41598-023-39089-3
Scherer, Michael; Al-Haj Husain, Nadin; Barmak, Abdul B; Kois, John C; Özcan, Mutlu; Revilla-León, Marta (2023). Influence of the layer thickness on the flexural strength of aged and non-aged additively manufactured interim dental material. Journal of prosthodontics, 32(S1), pp. 68-73. Wiley 10.1111/jopr.13582
Maneiro Lojo, Jesús; Alonso Pérez-Barquero, Jorge; García-Sala Bonmatí, Fernando; Agustín-Panadero, Rubén; Yilmaz, Burak; Revilla-León, Marta (2023). Influence of print orientation on the accuracy (trueness and precision) of diagnostic casts manufactured with a daylight polymer printer. (In Press). The journal of prosthetic dentistry Elsevier 10.1016/j.prosdent.2023.01.033
Revilla-León, Marta; Agustín-Panadero, Rubén; Zeitler, Jonathan M; Barmak, Abdul B; Yilmaz, Burak; Kois, John C; Pérez-Barquero, Jorge Alonso (2023). Differences in maxillomandibular relationship recorded at centric relation when using a conventional method, four intraoral scanners, and a jaw tracking system: A clinical study. (In Press). The journal of prosthetic dentistry Elsevier 10.1016/j.prosdent.2022.12.007
Revilla-León, Marta; Al-Haj Husain, Nadin; Barmak, Abdul B; Pérez-López, Javier; Raigrodski, Ariel J; Özcan, Mutlu (2022). Chemical Composition and Flexural Strength Discrepancies Between Milled and Lithography-Based Additively Manufactured Zirconia. Journal of prosthodontics, 31(9), pp. 778-783. Wiley 10.1111/jopr.13482
Giugovaz, Adriana; Pérez-Giugovaz, Marcelo Gabriel; Al-Haj Husain, Nadin; Barmak, Abdul B; Özcan, Mutlu; Revilla-León, Marta (2022). Flexural strength of aged and nonaged interim materials fabricated by using milling, additive manufacturing, and a combination of subtractive and additive methods. The journal of prosthetic dentistry, 128(3), 513.e1-513.e11. Elsevier 10.1016/j.prosdent.2022.05.004
Revilla-León, Marta; Al-Haj Husain, Nadin; Methani, Mohammed Mujtaba; Özcan, Mutlu (2021). Chemical composition, surface roughness, and ceramic bond strength of additively manufactured cobalt-chromium dental alloys. The journal of prosthetic dentistry, 125(5), pp. 825-831. Elsevier 10.1016/j.prosdent.2020.03.012
Revilla-León, Marta; Al-Haj Husain, Nadin; Ceballos, Laura; Özcan, Mutlu (2021). Flexural strength and Weibull characteristics of stereolithography additive manufactured versus milled zirconia. The journal of prosthetic dentistry, 125(4), pp. 685-690. Elsevier 10.1016/j.prosdent.2020.01.019
