Surface roughness, optical properties, and microhardness of additively and subtractively manufactured CAD-CAM materials after brushing and coffee thermal cycling.

Çakmak, Gülce; Donmez, Mustafa Borga; Silva de Paula, Marcella; Akay, Canan; Fonseca, Manrique; Kahveci, Çiğdem; Abou-Ayash, Samir; Yilmaz, Burak (2023). Surface roughness, optical properties, and microhardness of additively and subtractively manufactured CAD-CAM materials after brushing and coffee thermal cycling. (In Press). Journal of prosthodontics Wiley 10.1111/jopr.13796

Preview

Text Journal_of_Prosthodontics_-_2023_-_akmak_-_Surface_roughness_optical_properties_and_microhardness_of_additively_and.pdf - Accepted Version Available under License Publisher holds Copyright. Download (1MB) | Preview

PURPOSE

To evaluate the surface roughness, optical properties, and microhardness of additively or subtractively manufactured CAD-CAM materials after simulated brushing and coffee thermal cycling.

MATERIAL AND METHODS

Two additively manufactured resins (Crowntec, CT and VarseoSmile Crown Plus, VS) and 3 subtractively manufactured materials (a reinforced composite (Brilliant Crios, BC), a polymer-infiltrated ceramic network (Enamic, VE), and a feldspathic ceramic (Mark II, VM)) were used to fabricate disk-shaped specimens (Ø10×1-mm) (n = 10). Surface roughness, Vickers microhardness, and color coordinates were measured after polishing, while surface roughness was also measured before polishing. Specimens were then subjected to 25000 cycles of brushing and 10000 cycles of coffee thermal cycling, and measurements were repeated after each time interval. Color difference (ΔE00 ) and relative translucency parameter (RTP) were calculated. Robust analysis of variance test was used to evaluate surface roughness, ΔE00 , and RTP data, while generalized linear model analysis was used for microhardness data (α = .05).

RESULTS

Material type and time interval interaction affected tested parameters (P≤.002). In addition, material type affected all parameters (P<.001) other than surface roughness (P = .051), and time interval affected surface roughness and microhardness values (P<.001). Tested materials mostly had their highest surface roughness before polishing (P≤.026); however, there was no clear trend regarding the roughness of materials within different time intervals along with ΔE00 and RTP values within materials or time intervals. VS and CT had the lowest microhardness regardless of the time interval, while the remaining materials were listed as VM, VE, and BC in decreasing order (P<.001). Coffee thermal cycling only reduced the microhardness of VM (P<.001).

CONCLUSIONS

Tested additively manufactured resins can be considered more susceptible to simulated brushing and coffee thermal cycling than the other materials, given the fact that their surface roughness and ΔE00 values were higher than previously reported acceptability thresholds and because they had the lowest microhardness after all procedures were complete. This article is protected by copyright. All rights reserved.

Interest & Impact

Downloads

0 since deposited on 14 Nov 2023
0 in the past 12 months

Citations

5 Citations in Web of Science ®
6 Citations in Scopus

Search

in Google Scholar™

Services

Actions (login required)

Edit item

Actions (login required)

Edit item