04 Faculty of Medicine > School of Dental Medicine > Department of Reconstructive Dentistry and Gerodontology

Up a level
Export as [feed] RSS
Group by: Date | Name | Item Type | Refereed | No Grouping
Jump to: 2024 | 2023 | 2022 | 2021 | 2020 | 2019 | 2018 | 2017 | 2016 | 2015 | 2014 | 2013 | 2012 | 1996
Number of items at this level: 594.

2024

Yilmaz, Burak; Gouveia, Diogo; Schimmel, Martin; Lu, Wei-En; Özcan, Mutlu; Abou-Ayash, Samir (2024). Effect of adhesive system, resin cement, heat-pressing technique, and thermomechanical aging on the adhesion between titanium base and a high-performance polymer. The journal of prosthetic dentistry, 131(3), pp. 468-474. Elsevier 10.1016/j.prosdent.2022.03.026

Çakmak, Gülce; Weber, Franziska Alexandra; Donmez, Mustafa Borga; Kahveci, Çiğdem; Schimmel, Martin; Yilmaz, Burak (2024). Effect of coffee thermocycling on the surface roughness and stainability of denture base materials with different chemical compositions manufactured with additive and subtractive technologies. Journal of esthetic and restorative dentistry, 36(3), pp. 453-459. Wiley 10.1111/jerd.13136

Sasany, Rafat; Donmez, Mustafa Borga; de Paula, Marcella Silva; Kahveci, Çiğdem; Ceylan, Gözlem; Yilmaz, Burak; Çakmak, Gülce (2024). Stainability and translucency of potassium aluminum sulfate applied computer-aided design and computer-aided manufacturing materials after coffee thermocycling. Journal of esthetic and restorative dentistry, 36(3), pp. 477-483. Wiley 10.1111/jerd.13154

Molinero-Mourelle, Pedro; Abou-Ayash, Samir; Brägger, Urs; Schimmel, Martin; Özcan, Mutlu; Yilmaz, Burak; Buser, Ramona; Al-Haj Husain, Nadin (2024). Load bearing capacity of 3-unit screw-retained implant-supported fixed dental prostheses with a mesial and distal cantilever on a single implant: A comparative in vitro study. Journal of the mechanical behavior of biomedical materials, 151, p. 106395. Elsevier 10.1016/j.jmbbm.2024.106395

Nrecaj, Arnold; Takeshita, Lisa; Moreira, Yasmin Milhomens; Schimmel, Martin; Leles, Cláudio Rodrigues; Srinivasan, Murali (2024). Reliability between the two-colour chewing gum and the gummy-jelly tests used for the assessment of masticatory performance. (In Press). Journal of oral rehabilitation Wiley 10.1111/joor.13665

Afrashtehfar, Kelvin I; Kim, J W Martin (2024). Re: COVID-19 as a factor associated with early dental implant failures: A retrospective analysis-There is a need for research on the effect of COVID-19 vaccination on dental implant failure: Implications for policymaking and insurance. Clinical implant dentistry and related research, 26(1), pp. 246-247. Blackwell 10.1111/cid.13277

Parisius, Karl G H; Verhoeff, Merel C; Lobbezoo, Frank; Avivi-Arber, Limor; Duyck, Joke; Hirano, Hirohiko; Iijima, Katsuya; Janssens, Barbara; Kossioni, Anastassia; Lin, Chia-Shu; McKenna, Gerald; Müller, Frauke; Schimmel, Martin; Visser, Anita; Watanabe, Yutaka; Gobbens, Robbert J J (2024). Towards an operational definition of oral frailty: A e-Delphi study. Archives of gerontology and geriatrics, 117, p. 105181. Elsevier 10.1016/j.archger.2023.105181

Çakmak, Gülce; Chebaro, Jad; Donmez, Mustafa Borga; Yılmaz, Deniz; Yoon, Hyung-In; Kahveci, Çiğdem; Schimmel, Martin; Yilmaz, Burak (2024). Influence of intraoral scanner and finish line location on the fabrication trueness and margin quality of additively manufactured laminate veneers fabricated with a completely digital workflow. The journal of prosthetic dentistry, 131(2), 313.e1-313.e9. Elsevier 10.1016/j.prosdent.2023.10.026

Jo, Ye-Hyeon; Cho, Jun-Ho; Park, Dong Hyun; Yoon, Hyung-In; Han, Seung Hyun; Yilmaz, Burak (2024). Antimicrobial activity, surface properties, and cytotoxicity of microencapsulated phytochemicals incorporated into three-dimensionally printable dental polymers. Journal of dentistry, 141(104820), p. 104820. Elsevier Science 10.1016/j.jdent.2023.104820

Cho, Jun-Ho; Çakmak, Gülce; Yi, Yuseung; Yoon, Hyung-In; Yilmaz, Burak; Schimmel, Martin (2024). Tooth morphology, internal fit, occlusion, and proximal contacts of dental crowns designed by deep learning-based dental software: A comparative study. Journal of dentistry, 141(104830), p. 104830. Elsevier Science 10.1016/j.jdent.2023.104830

Donmez, Mustafa Borga; Çakmak, Gülce; Schimmel, Martin; Yilmaz, Burak (2024). Implementation of triple-scan protocol to evaluate the fit of complete-arch implant-supported fixed prostheses. (In Press). Journal of prosthodontics Wiley 10.1111/jopr.13830

Yilmaz, Hakan; Arınç, Hakan; Çakmak, Gülce; Atalay, Sevda; Donmez, Mustafa Borga; Kökat, Ali Murat; Yilmaz, Burak (2024). Effect of scan pattern on the scan accuracy of a combined healing abutment scan body system. The journal of prosthetic dentistry, 131(1), pp. 110-118. Elsevier 10.1016/j.prosdent.2022.01.018

Olcay, Emin Orkun; Diken Turksayar, Almira Ada; Demirel, Munir; Donmez, Mustafa Borga; Şahmalı, Sevil Meral (2024). Effect of partially stabilized zirconia thickness on the translucency and microhardness of resin cement. The journal of prosthetic dentistry, 131(1), pp. 94-99. Elsevier 10.1016/j.prosdent.2022.01.030

Çakmak, Gülce; Cuellar, Alfonso Rodriguez; Treviño Santos, Alejandro; Johnston, William M; Dönmez, Mustafa Borga; Yilmaz, Burak (2024). Color and translucency of milled polymethyl methacrylate crowns on non-tooth-colored interim abutments with different surface treatments. The journal of prosthetic dentistry, 131(1), pp. 102-109. Elsevier 10.1016/j.prosdent.2022.01.005

Al-Haj Husain, Adib; Oechslin, Dominik A; Stadlinger, Bernd; Winklhofer, Sebastian; Özcan, Mutlu; Schönegg, Daphne; Al-Haj Husain, Nadin; Sommer, Stefan; Piccirelli, Marco; Valdec, Silvio (2024). Preoperative imaging in third molar surgery - A prospective comparison of X-ray-based and radiation-free magnetic resonance orthopantomography. Journal of cranio-maxillo-facial surgery, 52(1), pp. 117-126. Elsevier 10.1016/j.jcms.2023.10.005

Coldea, Andrea; Donmez, Mustafa Borga; Stawarczyk, Bogna (2024). Effect of final temperature and heating rate on the mechanical and optical properties of a zirconia veneering ceramic. Journal of the mechanical behavior of biomedical materials, 149, p. 106235. Elsevier 10.1016/j.jmbbm.2023.106235

Lee, Chan-Gyu; Jin, Gan; Lim, Jung-Hwa; Liu, Yunqi; Afrashtehfar, Kelvin Ian; Kim, Jong-Eun (2024). Influence of hydrothermal aging on the shear bond strength of 3D printed denture-base resin to different relining materials. Journal of the mechanical behavior of biomedical materials, 149, p. 106221. Elsevier 10.1016/j.jmbbm.2023.106221

Wittneben, Julia-Gabriela; Abou-Ayash, Samir; Gashi, Ardian; Buser, Daniel; Belser, Urs; Brägger, Urs; Sailer, Irena; Gavric, Jelena (2024). Implant-supported single all-ceramic crowns made from prefabricated (stock) or individualized CAD/CAM zirconia abutments: A 5 year randomized clinical trial. Journal of esthetic and restorative dentistry, 36(1), pp. 164-173. Wiley 10.1111/jerd.13188

Müller, Frauke; Al‐Nawas, Bilal; Storelli, Stefano; Quirynen, Marc; Hicklin, Stefan; Castro‐Laza, Jose; Bassetti, Mario; Srinivasan, Murali (2024). Small‐diameter titanium grade IV and titanium–zirconium implants in edentulous mandibles: Ten‐year results from a double‐blind, randomised controlled split‐mouth core‐trial. Clinical oral implants research, 35(1), pp. 77-88. Wiley-Blackwell 10.1111/clr.14199

Jurado, Carlos A; Alhotan, Abdulaziz; Mekled, Salwa; Cho, Seok-Hwan; Afrashtehfar, Kelvin I (2024). Impact of restoration thickness and tooth shade background on the translucency of zirconia laminate veneers: An in vitro comparative study. The Saudi dental journal, 36(1), pp. 140-145. Elsevier 10.1016/j.sdentj.2023.10.019

2023

Elmsmari, Firas; María Delgado, Luis; Duran-Sindreu, Fernando; Pérez, Román A; Luisa García, Maria; Teulé Trull, Míriam; Afrashtehfar, Kelvin I; Antonio González, José; Sánchez-López, Elena (2023). Novel strategies enhancing endodontic disinfection: antibacterial biodegradable calcium hydroxide nanoparticles in an ex vivo model. International journal of pharmaceutics, 648, p. 123627. Elsevier 10.1016/j.ijpharm.2023.123627

Almogbel, Lolowh; Zadeh, Ramtin-Sadid; Orgev, Ahmet; Çakmak, Gülce; Li, Rui (2023). Flexural strength, surface roughness, and biofilm formation of ceramic-reinforced PEEK: An in vitro comparative study. (In Press). Journal of prosthodontics Wiley 10.1111/jopr.13815

Türksayar, Almira Ada Diken; Demirel, Münir; Donmez, Mustafa Borga (2023). Optical properties, biaxial flexural strength, and reliability of new-generation lithium disilicate glass-ceramics after thermal cycling. Journal of prosthodontics, 32(9), pp. 815-820. Wiley 10.1111/jopr.13632

Jurado, Carlos A; Afrashtehfar, Kelvin I; Hyer, Jared; Alhotan, Abdulaziz (2023). Effect of sintering on the translucency of CAD-CAM lithium disilicate restorations: a comparative in vitro study. Journal of prosthodontics, 32(9), pp. 861-866. Wiley 10.1111/jopr.13644

Guirao, Sergi; Llansana, Ferran; Button, Heather; Yilmaz, Burak; Kois, John C; Revilla-León, Marta (2023). Additively manufactured devices with varying designs and sizes for acquiring initial intraoral implant scans. Journal of prosthodontics, 32(S2), pp. 181-185. Wiley 10.1111/jopr.13750

Revilla-León, Marta; Lanis, Alejandro; Yilmaz, Burak; Kois, John C; Gallucci, German O (2023). Intraoral digital implant scans: Parameters to improve accuracy. Journal of prosthodontics, 32(S2), pp. 150-164. Wiley 10.1111/jopr.13749

Donmez, Mustafa Borga; Güven, Mehmet Esad; Yılmaz, Deniz; Abou-Ayash, Samir; Çakmak, Gülce; Yilmaz, Burak (2023). Trueness and precision of combined healing abutment scan body system scans at different sites of maxilla after multiple repositioning of the scan body. Journal of dentistry, 139, p. 104716. Elsevier 10.1016/j.jdent.2023.104716

Donmez, Mustafa Borga; Gómez-Polo, Miguel; Çakmak, Gülce; Yilmaz, Burak; Revilla-León, Marta (2023). Influence of implant scan body design (height, diameter, geometry, material, and retention system) on intraoral scanning accuracy: A systematic review. Journal of prosthodontics, 32(S2), pp. 165-180. Wiley 10.1111/jopr.13774

Sisli, S N; Gul, -Ates E; Ozcelik, T B; Yilmaz, B; Revilla-León, M (2023). Survival of root canal-treated teeth adjacent to an implant: a retrospective case-control study. Journal of dentistry, 139, p. 104742. Elsevier Science 10.1016/j.jdent.2023.104742

Al Fodeh, Rami S; Al-Johi, Omer S; Alibrahim, Anas N; Al-Dwairi, Ziad N; Al-Haj Husain, Nadin; Özcan, Mutlu (2023). Fracture strength of endocrown maxillary restorations using different preparation designs and materials. Journal of the mechanical behavior of biomedical materials, 148(106184), p. 106184. Elsevier 10.1016/j.jmbbm.2023.106184

Benli, Merve; Al-Haj Husain, Nadin; Ozcan, Mutlu (2023). Mechanical and chemical characterization of contemporary occlusal splint materials fabricated with different methods: a systematic review. Clinical oral investigations, 27(12), pp. 7115-7141. Springer 10.1007/s00784-023-05360-0

Wierichs, R J; Kramer, E J; Meyer-Lueckel, H; Abou-Ayash, S (2023). Success and complication rates of non-precious alloy telescopic crowns in a general dental practice. Clinical oral investigations, 27(12), pp. 7605-7624. Springer-Verlag 10.1007/s00784-023-05350-2

Raabe, Clemens; Biel, Philippe; Dulla, Fabrice A; Janner, Simone F M; Abou-Ayash, Samir; Couso-Queiruga, Emilio (2023). Inter- and intraindividual variability in virtual single-tooth implant positioning. (In Press). Clinical oral implants research Wiley 10.1111/clr.14203

Çakmak, Gülce; Watson Asadolahi, Nura; Schimmel, Martin; Molinero Mourelle, Pedro; Akay, Canan; Donmez, Mustafa Borga; Yilmaz, Burak (2023). Effect of coffee thermal cycling on the surface properties and stainability of additively manufactured denture base resins in different layer thicknesses. (In Press). Journal of prosthodontics Wiley 10.1111/jopr.13803

Raabe, Clemens; Abou-Ayash, Samir; Yilmaz, Burak; Surbek, Fiona Jennifer; Chappuis, Vivianne; Couso Queiruga, Emilio (2023). Positional accuracy during the sequence of static computer-assisted implant surgery in three alveolar ridge morphologies: an in vitro study. (In Press). Journal of prosthodontics Wiley 10.1111/jopr.13798

Çakmak, Gülce; Donmez, Mustafa Borga; Silva de Paula, Marcella; Akay, Canan; Fonseca, Manrique; Kahveci, Çiğdem; Abou-Ayash, Samir; Yilmaz, Burak (2023). Surface roughness, optical properties, and microhardness of additively and subtractively manufactured CAD-CAM materials after brushing and coffee thermal cycling. (In Press). Journal of prosthodontics Wiley 10.1111/jopr.13796

Jurado, C A; Villalobos-Tinoco, J; Mekled, S; Sanchez, R; Afrashtehfar, K I (2023). Printed Digital Wax-up Model as a Blueprint for Layered Pressed-ceramic Laminate Veneers: Technique Description and Case Report. Operative dentistry, 48(6), pp. 618-626. Operative Dentistry, Inc. 10.2341/22-144-S

Yilmaz, Burak; Guo, Xiaohan; Schimmel, Martin; Abou-Ayash, Samir (2023). Effect of industrial scanner and framework material interaction on the marginal gaps of CAD-CAM complete-arch implant frameworks. The journal of prosthetic dentistry, 130(5), pp. 723-730. Elsevier 10.1016/j.prosdent.2021.10.013

Atalay, Sevda; Çakmak, Gülce; Fonseca, Manrique; Schimmel, Martin; Yilmaz, Burak (2023). Effect of different disinfection protocols on the surface properties of CAD-CAM denture base materials. The journal of prosthetic dentistry, 130(5), pp. 787-795. Elsevier 10.1016/j.prosdent.2021.12.007

Molinero Mourelle, Pedro; Peter, Lukas; Gaviria, Ana Sol; Fonseca, Manrique; Schimmel, Martin; Katsoulis, Joannis (2023). Tactile misfit detection ability at the implant-abutment interface of internal connection dental implants: an in-vitro study. Acta odontologica Scandinavica, 81(8), pp. 591-596. Taylor & Francis 10.1080/00016357.2023.2223715

Çakmak, Gülce; Güven, Mehmet Esad; Donmez, Mustafa Borga; Kahveci, Çiğdem; Schimmel, Martin; Abou-Ayash, Samir; Yilmaz, Burak (2023). Effect of internal connection type and screw channel angle on the screw stability of anterior implant-supported zirconia crowns. Clinical oral implants research, 34(11), pp. 1248-1256. Wiley-Blackwell 10.1111/clr.14165

Yilmaz, Burak; Dede, Doğu Ömür; Donmez, Mustafa Borga; Küçükekenci, Ahmet Serkan; Lu, Wei-En; Schumacher, Fernanda; Çakmak, Gülce (2023). Comparison of intraoral and laboratory scanners to an industrial-grade scanner while analyzing the fabrication trueness of polymer and titanium complete-arch implant-supported frameworks. Journal of dentistry, 138, p. 104697. Elsevier 10.1016/j.jdent.2023.104697

Elbashti, Mahmoud; Molinero-Mourelle, Pedro; Aswehlee, Amel; Bornstein, Michael M; Abou-Ayash, Samir; Schimmel, Martin; Ella, Bruno; Naveau, Adrien (2023). Effect of triangular mesh resolution on the geometrical trueness of segmented CBCT maxillofacial data into STL format. Journal of dentistry, 138, p. 104722. Elsevier Science 10.1016/j.jdent.2023.104722

Revilla-León, Marta; Barmak, Abdul B; Tohme, Hani; Yilmaz, Burak; Kois, John C; Gómez-Polo, Miguel (2023). Factors that influence the accuracy of maxillomandibular relationship at maximum intercuspation acquired by using intraoral scanners: A systematic review. Journal of dentistry, 138(104718), p. 104718. Elsevier 10.1016/j.jdent.2023.104718

Donmez, Mustafa Borga; Çakmak, Gülce; Dede, Doğu Ömür; Küçükekenci, Ahmet Serkan; Lu, Wei-En; Schumacher, Fernanda; Revilla-León, Marta; Yilmaz, Burak (2023). Effect of scan powder and scanning technology on measured deviations of complete-arch implant supported frameworks digitized with industrial and intraoral scanners. Journal of dentistry, 138, p. 104736. Elsevier Science 10.1016/j.jdent.2023.104736

Cho, Jun-Ho; Yi, Yuseung; Choi, Jinhyeok; Ahn, Junseong; Yoon, Hyung-In; Yilmaz, Burak (2023). Time efficiency, occlusal morphology, and internal fit of anatomic contour crowns designed by dental software powered by generative adversarial network: A comparative study. Journal of dentistry, 138, p. 104739. Elsevier Science 10.1016/j.jdent.2023.104739

Hasson, Jean-Nicolas; Brand, Emmanuel; Michaud, Léa; Fricker, Dominique; Brägger, Urs (2023). Long-Term Effectiveness of Metal-Etched Splints and the Role of Patient Compliance During Supportive Periodontal Therapy. Acta Scientific Dental Sciences, 7(11), pp. 65-73. 10.31080/ASDS.2023.07.1737

Srivastava, Gunjan; Padhiary, Subrat Kumar; Mohanty, Neeta; Molinero-Mourelle, Pedro; Chebib, Najla (2023). Accuracy of Intraoral Scanner for Recording Completely Edentulous Arches-A Systematic Review. Dentistry journal, 11(10) MDPI 10.3390/dj11100241

Fonseca, Manrique; Molinero-Mourelle, Pedro; Donmez, Mustafa Borga; Abou-Ayash, Samir; Buser, Daniel; Sculean, Anton; Yilmaz, Burak (2023). Management of compromised spacing in the esthetic zone by combining an ultra-thin partial ceramic veneer and a ceramic implant crown: a case report of a multi-disciplinary approach and technique description (In Press). International journal of periodontics & restorative dentistry Quintessence Publ. 10.11607/prd.6626

Azpiazu-Flores, Francisco X; Johnston, William M; Mata-Mata, Severino J; Yilmaz, Burak (2023). Positional trueness of three removable die designs with different root geometries manufactured using stereolithographic 3D printing. (In Press). The journal of prosthetic dentistry Elsevier 10.1016/j.prosdent.2023.08.036

Kois, John C; Zeitler, Jonathan M; Barmak, Abdul B; Yilmaz, Burak; Gómez-Polo, Miguel; Revilla-León, Marta (2023). Discrepancies in the occlusal devices designed by an experienced dental laboratory technician and by 2 artificial intelligence-based automatic programs. (In Press). The journal of prosthetic dentistry Elsevier 10.1016/j.prosdent.2023.08.015

Ciftci, Gozde; Somay, Suphi Deniz; Ozcan, Işıl; Ozcelik, Tuncer Burak; Yilmaz, Burak (2023). Prosthetic complications with mandibular bar-retained implant overdentures having distal attachments and metal frameworks: A 2- to 12-year retrospective analysis. The journal of prosthetic dentistry, 130(4), pp. 573-580. Elsevier 10.1016/j.prosdent.2021.11.016

Jurado, Carlos A; Amarillas-Gastelum, Clarisa; Tonin, Bruna Santos Honório; Nielson, Gentry; Afrashtehfar, Kelvin I; Fischer, Nicholas G (2023). Traditional versus conservative endodontic access impact on fracture resistance of chairside CAD-CAM lithium disilicate anterior crowns: An in vitro study. Journal of prosthodontics, 32(8), pp. 728-734. Wiley 10.1111/jopr.13625

Lee, Won-Jun; Jo, Ye-Hyeon; Yilmaz, Burak; Yoon, Hyung-In (2023). Effect of build angle, resin layer thickness, and resin viscosity on the surface properties and microbial adhesion of denture bases manufactured by using digital light processing. Journal of dentistry, 137, p. 104608. Elsevier 10.1016/j.jdent.2023.104608

Radomski, Kyle; Lee, Yun-Hee; Lee, Sang J; Yoon, Hyung-In (2023). Effect of exposure energy dose on lateral resolution and flexural strength of three-dimensionally printed dental zirconia. The journal of advanced prosthodontics, 15(5), pp. 248-258. Korean Academy of Prosthodontics 10.4047/jap.2023.15.5.248

Ramseier, Christoph A; Klima, Sascha; Klima, Elmira; Enkling, Norbert (2023). Dental anxiety in Switzerland: trends in prevalence and associations with socioeconomic factors in 2010 and 2017. (In Press). Swiss dental journal, 134(4) Schweizerische Zahnärzte-Gesellschaft SSO

Jurado, Carlos A; Bora, Pranit V; Azpiazu-Flores, Francisco X; Cho, Seok-Hwan; Afrashtehfar, Kelvin I (2023). Effect of resin cement selection on fracture resistance of chairside CAD-CAM lithium disilicate crowns containing virgilite: A comparative in vitro study. (In Press). The journal of prosthetic dentistry Elsevier 10.1016/j.prosdent.2023.08.019

Tuncer, Berkcan; Aktas, Guliz; Baris Guncu, Mustafa; Deniz, Diler; Muhtarogullari, Mehmet; Al-Haj Husain, Nadin; Özcan, Mutlu (2023). Effects of Surface Treatments and Cement Type on Shear Bond Strength between Titanium Alloy and All-Ceramic Materials. Materials, 16(18) Molecular Diversity Preservation International MDPI 10.3390/ma16186240

Herrera-Trinidad, Rubén; Molinero-Mourelle, Pedro; Fonseca, Manrique; Weber, Adrian Roman; Vera, Vicente; Mena, María Luz; Vera-González, Vicente (2023). Assessment of pH Value and Release of Calcium Ions in Calcium Silicate Cements: An In Vitro Comparative Study. Materials, 16(18) Molecular Diversity Preservation International MDPI 10.3390/ma16186213

Tanveer, Waqas; Ridwan-Pramana, Angela; Molinero-Mourelle, Pedro; Forouzanfar, Tymour (2023). Applications of CAD/CAM Technology for Craniofacial Implants Placement and Manufacturing of Auricular Prostheses-Systematic Review. Journal of clinical medicine, 12(18) MDPI 10.3390/jcm12185950

Thu, Khaing Myat; Molinero-Mourelle, Pedro; Yeung, Andy Wai Kan; Abou-Ayash, Samir; Lam, Walter Yu Hang (2023). Which clinical and laboratory procedures should be used to fabricate digital complete dentures? A systematic review. (In Press). The journal of prosthetic dentistry Elsevier 10.1016/j.prosdent.2023.07.027

Yilmaz, Burak; Dede, Doğu Ömür; Diker, Emre; Fonseca, Manrique; Johnston, William Michael; Küçükekenci, Ahmet Serkan (2023). Effect of cross-polarization filters on the trueness of colors obtained with a single-lens reflex camera, macro lens, and a ring flash. Journal of esthetic and restorative dentistry, 35(6), pp. 878-885. Wiley 10.1111/jerd.13053

Jervøe-Storm, Pia-Merete; Jepsen, Søren; Marder, Michael; Kraus, Dominik; Stoilov, Milan; Enkling, Norbert (2023). Prevention of internal bacterial colonization of dental implants: A comparative longitudinal observational study. Clinical oral implants research, 34(9), pp. 979-986. Wiley 10.1111/clr.14124

Afrashtehfar, Kelvin I; Oh, Kyung Chul; Jurado, Carlos A; Lee, Hyeonjong (2023). Lack of keratinized mucosa increases peri-implantitis risk. Evidence-based dentistry, 24(3), pp. 118-120. Springer Nature 10.1038/s41432-023-00913-4

Reissmann, Daniel R; Schimmel, Martin; Kraus, Dominik; Stoilov, Milan; Srinivasan, Murali; Enkling, Norbert (2023). IMPACT OF LOADING PROTOCOL OF 2-IMPLANT BAR-RETAINED MANDIBULAR OVERDENTURES ON ORAL HEALTH-RELATED QUALITY OF LIFE: A RANDOMIZED CONTROLLED TRIAL. The journal of evidence-based dental practice, 23(3), p. 101891. Elsevier 10.1016/j.jebdp.2023.101891

Wittneben, Julia; Molinero-Mourelle, Pedro; Hamilton, Adam; Alnasser, Muhsen; Obermaier, Barbara; Morton, Dean; Gallucci, German O; Wismeijer, Daniel (2023). Clinical performance of immediately placed and immediately loaded single implants in the esthetic zone: A systematic review and meta-analysis. Clinical oral implants research, 34 Suppl 26, pp. 266-303. Wiley 10.1111/clr.14172

Abou-Ayash, Samir; Fonseca, Manrique; Pieralli, Stefano; Reissmann, Daniel R (2023). Treatment effect of implant-supported fixed complete dentures and implant overdentures on patient-reported outcomes: A systematic review and meta-analysis. Clinical oral implants research, 34 Suppl 26, pp. 177-195. Wiley 10.1111/clr.14065

Morton, Dean; Wismeijer, Daniel; Chen, Stephen; Hamilton, Adam; Wittneben, Julia; Casentini, Paolo; Gonzaga, Luiz; Lazarin, Rafael; Martin, William; Molinero-Mourelle, Pedro; Obermailer, Barbara; Polido, Waldemar D; Tahmaseb, Ali; Thoma, Daniel; Zembic, Anja (2023). Group 5 ITI Consensus Report: Implant placement and loading protocols. Clinical oral implants research, 34 Suppl 26, pp. 349-356. Wiley-Blackwell 10.1111/clr.14137

Schimmel, Martin; Araujo, Mauricio; Abou-Ayash, Samir; Buser, Ramona; Ebenezer, Supriya; Fonseca, Manrique; Heitz-Mayfield, Lisa J; Holtzman, Lucrezia Paterno; Kamnoedboon, Porawit; Levine, Robert; McKenna, Gerry; Maniewicz, Sabrina; Matarazzo, Flavia; Mattheos, Nikos; Papaspyridakos, Panos; De Souza, André Barbisan; Srinivasan, Murali; Stilwell, Charlotte; Weber, Hans Peter (2023). Group 4 ITI Consensus Report: Patient benefits following implant treatment in partially and fully edentulous patients. Clinical oral implants research, 34 Suppl 26, pp. 257-265. Wiley 10.1111/clr.14145

Hamilton, Adam; Gonzaga, Luiz; Amorim, Karina; Wittneben, Julia-Gabriela; Martig, Lukas; Morton, Dean; Martin, William; Gallucci, German O; Wismeijer, Daniel (2023). Selection criteria for immediate implant placement and immediate loading for single tooth replacement in the maxillary esthetic zone: A systematic review and meta-analysis. Clinical oral implants research, 34 Suppl 26, pp. 304-348. Wiley-Blackwell 10.1111/clr.14109

Çakmak, Gülce; Hess, Julia Anouk; Donmez, Mustafa Borga; Yılmaz, Deniz; Alhotan, Abdulaziz; Schimmel, Martin; Peutzfeldt, Anne; Yilmaz, Burak (2023). Effect of polishing and denture cleansers on the surface roughness of new-generation denture base materials and their color change after cleansing. (In Press). Journal of prosthodontics Wiley 10.1111/jopr.13755

Dede, Doğu Ömür; Çakmak, Gülce; Donmez, Mustafa Borga; Küçükekenci, Ahmet Serkan; Lu, Wei-En; Ni, Andy Ai; Yilmaz, Burak (2023). Effect of analysis software program on measured deviations in complete arch, implant-supported framework scans. (In Press). The journal of prosthetic dentistry Elsevier 10.1016/j.prosdent.2023.06.028

Alshahrani, Faris A; Gad, Mohammed M; Al-Thobity, Ahmad M; Akhtar, Sultan; Kashkari, Afnan; Alzoubi, Fawaz; Yilmaz, Burak (2023). Effect of treated zirconium dioxide nanoparticles on the flexural properties of autopolymerized resin for interim fixed restorations: An in vitro study. The journal of prosthetic dentistry, 130(2), pp. 257-264. Elsevier 10.1016/j.prosdent.2021.09.031

Sasany, Rafat; Yilmaz, Burak (2023). Marginal discrepancy and fracture load of thermomechanically fatigued crowns fabricated with different CAD-CAM techniques. Journal of prosthodontics, 32(7), pp. 602-607. Wiley 10.1111/jopr.13612

Revilla-León, Marta; Yilmaz, Burak; Kois, John C; Att, Wael (2023). Prevention of peri-implant disease in edentulous patients with fixed implant rehabilitations. Clinical implant dentistry and related research, 25(4), pp. 743-751. Wiley 10.1111/cid.13182

Curado, Thalita Fernandes Fleury; Silva, Jésio Rodrigues; Nascimento, Lays Noleto; Leles, José Luiz Rodrigues; McKenna, Gerald; Schimmel, Martin; Leles, Cláudio Rodrigues (2023). Implant survival/success and peri-implant outcomes of titanium-zirconium mini implants for mandibular overdentures: Results from a 1-year randomized clinical trial. Clinical oral implants research, 34(8), pp. 769-782. Wiley 10.1111/clr.14102

Lee, Won-Jun; Jo, Ye-Hyeon; Yoon, Hyung-In (2023). Influence of postpolymerization time and atmosphere on the mechanical properties, degree of conversion, and cytotoxicity of denture bases produced by digital light processing. The journal of prosthetic dentistry, 130(2), 265.e1-265.e7. Elsevier 10.1016/j.prosdent.2023.05.008

Lee, Won-Jun; Jo, Ye-Hyeon; Yilmaz, Burak; Yoon, Hyung-In (2023). Effect of layer thickness, build angle, and viscosity on the mechanical properties and manufacturing trueness of denture base resin for digital light processing. Journal of dentistry, 135, p. 104598. Elsevier Science 10.1016/j.jdent.2023.104598

Cho, Jun-Ho; Çakmak Alp, Gülce; Yilmaz, Burak; Yoon, Hyung-In (2023). Effect of CAD-CAM restorative materials and scanning aid conditions on the accuracy and time efficiency of intraoral scans. Journal of prosthodontics, 32(7), pp. 608-615. Wiley 10.1111/jopr.13727

Couso Queiruga, Emilio; Spörri, Livia A; P Sabatini, Gabriela; Chappuis, Vivianne; Abou-Ayash, Samir; Yilmaz, Burak; Raabe, Clemens (2023). Accuracy of implant placement in the posterior maxillary region depending on the alveolar residual bone height and sinus morphology: An in vitro study. (In Press). Clinical oral implants research Wiley-Blackwell 10.1111/clr.14142

Han, Sangjun; Yi, Yuseung; Revilla-León, Marta; Yilmaz, Burak; Yoon, Hyung-In (2023). Feasibility of software-based assessment for automated evaluation of tooth preparation for dental crown by using a computational geometric algorithm. Scientific Reports, 13(1), p. 11847. Nature Publishing Group 10.1038/s41598-023-39089-3

Couso-Queiruga, Emilio; Garaicoa-Pazmino, Carlos; Fonseca, Manrique; Chappuis, Vivianne; Gonzalez-Martin, Oscar; Avila-Ortiz, Gustavo (2023). Interproximal Soft Tissue Height Changes After Unassisted Socket Healing versus Alveolar Ridge Preservation Therapy. (In Press). The international journal of periodontics & restorative dentistry Quintessence Publishing 10.11607/prd.6809

Shellis, R Peter; Barbour, Michele E; Parker, David M; Addy, Martin; Lussi, Adrian (2023). Effects of Calcium and Phosphate on Dissolution of Enamel, Dentin and Hydroxyapatite in Citric Acid. Swiss dental journal, 133(7-8), pp. 432-438. Schweizerische Zahnärzte-Gesellschaft SSO

Assaf, André; Azer, Shereen S; Sfeir, Abdo; Al-Haj Husain, Nadin; Özcan, Mutlu (2023). Risk Factors with Porcelain Laminate Veneers Experienced during Cementation: A Review. Materials, 16(14) Molecular Diversity Preservation International MDPI 10.3390/ma16144932

Çakmak, Gülce; Oosterveen-Rüegsegger, Alice Lisa; Akay, Canan; Schimmel, Martin; Yilmaz, Burak; Donmez, Mustafa Borga (2023). Influence of polishing technique and coffee thermal cycling on the surface roughness and color stability of additively and subtractively manufactured resins used for definitive restorations. (In Press). Journal of prosthodontics Wiley 10.1111/jopr.13730

Blanco-Ruiz, Sonia; Molinero-Mourelle, Pedro; Blanco-Ruiz, Miriam; Fernández-Tresguerres, Francisco González; Blanco-Samper, Senén; López-Quiles, Juan (2023). Effect of the buccal fat pad in the prevention of zygomatic implant surgery postoperative complications: A pilot study. Medicina oral, patología oral y cirugía bucal, 28(4), e371-e377. Medicina Oral 10.4317/medoral.25792

Çakmak, Gülce; Jutzi, Dino; Donmez, Mustafa Borga; Kahveci, Çiğdem; de Paula, Marcella Silve; Schimmel, Martin; Yilmaz, Burak (2023). Effect of number of supports and build angle on the fabrication and internal fit accuracy of additively manufactured definitive resin-ceramic hybrid crowns. Journal of dentistry, 134(104548), p. 104548. Elsevier Science 10.1016/j.jdent.2023.104548

Assery, Nasser M; Jurado, Carlos A; Assery, Mansour K; Afrashtehfar, Kelvin I. (2023). Peri-implantitis and systemic inflammation: A critical update. The Saudi dental journal, 35(5), pp. 443-450. Elsevier 10.1016/j.sdentj.2023.04.005

Revilla-León, Marta; Gómez-Polo, Miguel; Barmak, Abdul B; Kois, John C; Yilmaz, Burak; Alonso Pérez-Barquero, Jorge (2023). Influence of occlusal collision corrections completed by two intraoral scanners or a dental design program on the accuracy of the maxillomandibular relationship. (In Press). The journal of prosthetic dentistry Elsevier 10.1016/j.prosdent.2023.05.015

Chebib, Najla; Holmes, Emily; Maniewicz, Sabrina; Abou-Ayash, Samir; Srinivasan, Murali; McKenna, Gerald; Kossioni, Anastasia; Schimmel, Martin; Müller, Frauke; Brocklehurst, Paul (2023). Exploring preferences of older adults for dental services: A pilot multi-national discrete choice experiment. (In Press). Gerodontology Wiley 10.1111/ger.12696

Abou-Ayash, Samir; Molinero Mourelle, Pedro; Schönenberger, Alwin; Belser, Urs; Brägger, Urs; Flury, Simon (2023). Indirect repair of saliva-contaminated materials using veneering ceramics. Journal of prosthodontics, 32(5), pp. 445-451. Wiley 10.1111/jopr.13579

Wittneben, Julia-Gabriela; Yilmaz, Burak; Wismeijer, Daniel; Shahdad, Shakeel; Brägger, Urs; Abou-Ayash, Samir (2023). Patient-reported outcome measures focusing on the esthetics of implant-compared to tooth-supported single crowns-A systematic review and meta-analysis. Journal of esthetic and restorative dentistry, 35(4), pp. 632-645. Wiley 10.1111/jerd.12983

Niemeyer, Samira Helena; Maniewicz, Sabrina; Campus, Guglielmo; Tennert, Christian; Yilmaz, Burak; Zekeridou, Alkisti; Roccuzzo, Andrea; Esteves-Oliveira, Marcella; Carvalho, Thiago S; Wierichs, Richard Johannes (2023). Design, development and validation of a questionnaire to assess dentists' knowledge and experience in diagnosing, recording, and managing root caries. Clinical oral investigations, 27(6), pp. 2705-2711. Springer 10.1007/s00784-022-04842-x

Donmez, Mustafa Borga; Mathey, Ayse; Gäumann, Fabio; Mathey, Amber; Yilmaz, Burak; Abou-Ayash, Samir (2023). Effect of intraoral scanner and fixed partial denture situation on the scan accuracy of multiple implants: An in vitro study. Clinical implant dentistry and related research, 25(3), pp. 502-510. Wiley 10.1111/cid.13190

Anliker, Noemi Simone; Molinero-Mourelle, Pedro; Weijers, Mariëtte; Bukvic, Hristina; Bornstein, Michael M; Schimmel, Martin (2023). Dental status and its correlation with polypharmacy and multimorbidity in a Swiss nursing home population: a cross-sectional study. Clinical oral investigations, 27(6), pp. 3021-3028. Springer 10.1007/s00784-023-04906-6

Afrashtehfar, Kelvin I; Jurado, Carlos A; Al-Hadi, Dunia; Shetty, Krishna P (2023). Pulpotomy versus root canal treatment in permanent teeth with spontaneous pain: comparable clinical and patient outcomes, but insufficient evidence. Evidence-based dentistry, 24(2), pp. 54-56. Springer Nature 10.1038/s41432-023-00878-4

Alsaeed, Suliman; Afrashtehfar, Kelvin I; Alharbi, Muneerah H; Alfarraj, Shaden S; Alluhaydan, Shahad A; Abahussain, Fai A; Alotaibi, Ghaida M; Awawdeh, Mohammed A (2023). Impact of Orthodontic Appliances on Hiring Prospects in Saudi Arabia: A Cross-Sectional Study. Cureus, 15(6), e40173. Springer Nature Group 10.7759/cureus.40173

Ugurlu, M; Al-Haj Husain, N; Özcan, M (2023). Immediate and Late Repair of Microhybrid Resin Composites: Effect of Silane Coupling Agent, Universal Adhesives and Photo Polymerization. European journal of prosthodontics and restorative dentistry, 31(2), pp. 116-125. Dennis Barber 10.1922/EJPRD_2427Ugurlu10

Jurado, Carlos A; Alresayes, Saad; Rojas-Rueda, Silvia; Alqahtani, Ali; Tsujimoto, Akimasa; Fischer, Nicholas G; Afrashtehfar, Kelvin I (2023). Ceramic versus Composite Resin Polishing Systems on the Surface Roughness of Milled Leucite-Reinforced Ceramics. Medicina, 59(6) MDPI 10.3390/medicina59061048

Donmez, Mustafa Borga; Çakmak, Gülce; Yılmaz, Deniz; Schimmel, Martin; Abou-Ayash, Samir; Yilmaz, Burak; Peutzfeldt, Anne (2023). Bond strength of additively manufactured composite resins to dentin and titanium when bonded with dual-polymerizing resin cements. (In Press). The journal of prosthetic dentistry Elsevier 10.1016/j.prosdent.2023.04.003

Al-Haj Husain, Adib; Schmidt, Valérie; Valdec, Silvio; Stadlinger, Bernd; Winklhofer, Sebastian; Schönegg, Daphne; Sommer, Stefan; Özcan, Mutlu; Al-Haj Husain, Nadin; Piccirelli, Marco (2023). Author Correction: MR-orthopantomography in operative dentistry and oral and maxillofacial surgery: a proof of concept study. Scientific reports, 13(1), p. 7457. Springer Nature 10.1038/s41598-023-34473-5

Imamura, Yoshiki; Chebib, Najla; Ohta, Midori; Mojon, Philippe; Schulte-Eickhoff, Regina Maria; Schimmel, Martin; Graf, Christophe; Sato, Yuji; Müller, Frauke (2023). Masticatory performance in oral function assessment: alternative methods. Journal of oral rehabilitation, 50(5), pp. 383-391. Wiley 10.1111/joor.13421

Leles, Cláudio Rodrigues; Nascimento, Lays Noleto; Silva, Jésio Rodrigues; de Paula, Marcella Silva; Curado, Thalita Fernandes Fleury; McKenna, Gerald; Schimmel, Martin (2023). Willingness to accept or refuse mandibular implant overdenture treatment: a prospective study on edentulous enrolled in a clinical trial. Journal of oral rehabilitation, 50(5), pp. 392-399. Wiley 10.1111/joor.13429

Guzman-Perez, Gerardo; Jurado, Carlos Alberto; Azpiazu-Flores, Francisco X; Munoz-Luna, Humberto; Afrashtehfar, Kelvin I; Nurrohman, Hamid (2023). Soft Tissue Grafting Procedures before Restorations in the Esthetic Zone: A Minimally Invasive Interdisciplinary Case Report. Medicina, 59(5) MDPI 10.3390/medicina59050822

Al-Haj Husain, Adib; Schmidt, Valérie; Valdec, Silvio; Stadlinger, Bernd; Winklhofer, Sebastian; Schönegg, Daphne; Sommer, Stefan; Özcan, Mutlu; Al-Haj Husain, Nadin; Piccirelli, Marco (2023). MR-orthopantomography in operative dentistry and oral and maxillofacial surgery: a proof of concept study. Scientific reports, 13(1), p. 6228. Springer Nature 10.1038/s41598-023-33483-7

Robles, Manuel; Jurado, Carlos A; Azpiazu-Flores, Francisco X; Villalobos-Tinoco, Jose; Afrashtehfar, Kelvin I; Fischer, Nicholas G (2023). An Innovative 3D Printed Tooth Reduction Guide for Precise Dental Ceramic Veneers. Journal of Functional Biomaterials, 14(4) MDPI 10.3390/jfb14040216

Mekled, Salwa; Elwazeer, Salma; Jurado, Carlos A; White, James; Faddoul, Faddy; Afrashtehfar, Kelvin I; Fischer, Nicholas G (2023). Ultra-Translucent Zirconia Laminate Veneers: The Influence of Restoration Thickness and Stump Tooth-Shade. Materials, 16(8) Molecular Diversity Preservation International MDPI 10.3390/ma16083030

Jurado, Carlos A; Sadid-Zadeh, Ramtin; Watanabe, Hidehiko; Robbins, Craig E; Afrashtehfar, Kelvin I; Fischer, Nicholas G; Lee, Damian J (2023). Effect of incisal preparation design on the fracture strength of monolithic zirconia-reinforced lithium silicate laminate veneers. (In Press). Journal of prosthodontics Wiley 10.1111/jopr.13689

Cevik, Pinar; Akca, Gulcin; Asar, Neset Volkan; Avci, Emine; Kiat-Amnuay, Sudarat; Yilmaz, Burak (2023). Antimicrobial effects of nano titanium dioxide and disinfectants on maxillofacial silicones. (In Press). The journal of prosthetic dentistry Elsevier 10.1016/j.prosdent.2023.03.001

Di Fiore, Adolfo; Granata, Stefano; Monaco, Carlo; Stellini, Edoardo; Yilmaz, Burak (2023). Clinical performance of posterior monolithic zirconia implant-supported fixed dental prostheses with angulated screw channels: A 3-year prospective cohort study. The journal of prosthetic dentistry, 129(4), pp. 566-572. Elsevier 10.1016/j.prosdent.2021.06.043

Scherer, Michael; Al-Haj Husain, Nadin; Barmak, Abdul B; Kois, John C; Özcan, Mutlu; Revilla-León, Marta (2023). Influence of the layer thickness on the flexural strength of aged and non-aged additively manufactured interim dental material. Journal of prosthodontics, 32(S1), pp. 68-73. Wiley 10.1111/jopr.13582

Çakmak, Gülce; Donmez, Mustafa-Borga; Akay, Canan; Abou-Ayash, Samir; Schimmel, Martin; Yilmaz, Burak (2023). Effect of thermal cycling on the flexural strength and hardness of new-generation denture base materials. Journal of prosthodontics, 32(S1), pp. 81-86. Wiley 10.1111/jopr.13615

Leles, Cláudio Rodrigues; Leles, José Luiz Rodrigues; Curado, Thalita Fernandes Fleury; Silva, Jésio Rodrigues; Nascimento, Lays Noleto; de Paula, Marcella Silva; Maniewicz, Sabrina; Schimmel, Martin; McKenna, Gerald (2023). Mandibular bone characteristics, drilling protocols, and final insertion torque for titanium-zirconium mini-implants for overdentures: A cross-sectional analysis. Clinical implant dentistry and related research, 25(2), pp. 426-434. Wiley 10.1111/cid.13181

Raabe, Clemens; Dulla, Fabrice Alain; Yilmaz, Burak; Chappuis, Vivianne; Abou-Ayash, Samir (2023). Influence of Drilling Sequence and Guide-hole Design on the Accuracy of static Computer-Assisted Implant Surgery in Extraction Sockets and Healed Sites - An In Vitro Investigation. Clinical oral implants research, 34(4), pp. 320-329. Wiley-Blackwell 10.1111/clr.14042

Diker, Emre; Terzioglu, Hakan; Gouveia, Diogo N M; Donmez, Mustafa Borga; Seidt, Jeremy; Yilmaz, Burak (2023). Effect of material type, torque value, and sterilization on linear displacements of a scan body: An in vitro study. Clinical implant dentistry and related research, 25(2), pp. 419-425. Wiley 10.1111/cid.13187

Azpiazu-Flores, Francisco X; Lee, Damian J; Jurado, Carlos A; Afrashtehfar, Kelvin I; Alhotan, Abdulaziz; Tsujimoto, Akimasa (2023). Full-Mouth Rehabilitation of a Patient with Sjogren's Syndrome with Maxillary Titanium-Zirconia and Mandibular Monolithic Zirconia Implant Prostheses Fabricated with CAD/CAM Technology: A Clinical Report. Journal of Functional Biomaterials, 14(4) MDPI 10.3390/jfb14040174

Guzman-Perez, Gerardo; Jurado, Carlos A; Azpiazu-Flores, Francisco; Afrashtehfar, Kelvin I; Tsujimoto, Akimasa (2023). Minimally Invasive Laminate Veneer Therapy for Maxillary Central Incisors. Medicina, 59(3) MDPI 10.3390/medicina59030603

Maneiro Lojo, Jesús; Alonso Pérez-Barquero, Jorge; García-Sala Bonmatí, Fernando; Agustín-Panadero, Rubén; Yilmaz, Burak; Revilla-León, Marta (2023). Influence of print orientation on the accuracy (trueness and precision) of diagnostic casts manufactured with a daylight polymer printer. (In Press). The journal of prosthetic dentistry Elsevier 10.1016/j.prosdent.2023.01.033

Lin, Galvin Sim Siang; Jurado, Carlos A; Afrashtehfar, Kelvin I (2023). Interdisciplinary Approaches for Integrating Materials Science and Dentistry. bioengineering, 10(3) MPDI 10.3390/bioengineering10030344

Al-Dwairi, Ziad N; Al-Sardi, Moataz; Goodacre, Brian J; Goodacre, Charles J; Al Hamad, Khaled Q; Özcan, Mutlu; Al-Haj Husain, Nadin; Baba, Nadim Z (2023). Evaluation of Marginal and Internal Fit of Ceramic Laminate Veneers Fabricated with Five Intraoral Scanners and Indirect Digitization. Materials, 16(6) Molecular Diversity Preservation International MDPI 10.3390/ma16062181

Roccuzzo, Andrea; Borg-Bartolo, Roberta; Schimmel, Martin; Tennert, Christian; Manton, David J; Campus, Guglielmo (2023). Evaluation of the Oral Health Conditions and Oral Health-Related Quality of Life in a Community-Dwellers Population Aged ≥ 45 Years in the Canton of Bern: A Preliminary Pilot Study. International journal of environmental research and public health, 20(5) MDPI 10.3390/ijerph20054557

Donmez, Mustafa Borga; Mathey, Ayse; Gäumann, Fabio; Mathey, Amber; Yilmaz, Burak; Abou-Ayash, Samir (2023). Scan accuracy and time efficiency of different implant-supported fixed partial denture situations depending on the intraoral scanner and scanned area: An in vitro study. (In Press). The journal of prosthetic dentistry Elsevier 10.1016/j.prosdent.2023.01.029

Cakmak, Gülce; Subaşı, Meryem Gülce; Sert, Murat; Yilmaz, Burak (2023). Effect of surface treatments on wear and surface properties of different CAD-CAM materials and their enamel antagonists. The journal of prosthetic dentistry, 129(3), pp. 495-506. Elsevier 10.1016/j.prosdent.2021.06.023

Çakmak, Gülce; Donmez, Mustafa Borga; Akay, Canan; de Silva, Marcella Paula; Mangano, Francesco Guido; Abou-Ayash, Samir; Yilmaz, Burak (2023). Effect of measurement techniques and operators on measured deviations in digital implant scans. Journal of dentistry, 130(104388), p. 104388. Elsevier Science 10.1016/j.jdent.2022.104388

Dulla, Fabrice Alain; Couso-Queiruga, Emilio; Chappuis, Vivianne; Yilmaz, Burak; Abou-Ayash, Samir; Raabe, Clemens (2023). Influence of Alveolar Ridge Morphology and Guide-hole Design on the Accuracy of Static Computer-Assisted Implant Surgery with two Implant Macro-designs: An in Vitro Study. Journal of dentistry, 130(104426), p. 104426. Elsevier Science 10.1016/j.jdent.2023.104426

Donmez, Mustafa Borga; Yilmaz, Burak; Yoon, Hyung-In; Kahveci, Çiğdem; Schimmel, Martin; Çakmak, Gülce (2023). Effect of computer-aided design and computer-aided manufacturing technique on the accuracy of fixed partial denture patterns used for casting or pressing. Journal of dentistry, 130(104434), p. 104434. Elsevier Science 10.1016/j.jdent.2023.104434

Çakmak, Gülce; Herren, Kira Vera; Donmez, Mustafa Borga; Kahveci, Çiğdem; Schimmel, Martin; Yilmaz, Burak (2023). Effect of coffee thermocycling on the surface roughness and stainability of nanographene-reinforced polymethyl methacrylate used for fixed definitive prostheses. The journal of prosthetic dentistry, 129(3), 507.e1-507.e6. Elsevier 10.1016/j.prosdent.2022.12.009

Ballal, N V; Jalan, P; Rai, N; Al-Haj Husain, N; Özcan, M (2023). Evaluation of New Alkasite Based Restorative Material for Restoring Non- Carious Cervical Lesions- Randomized Controlled Clinical Trial. European journal of prosthodontics and restorative dentistry EJPRD, 31(1), pp. 72-77. Barber 10.1922/EJPRD_2410Ballal06

Jamjoom, Faris Z; Aldghim, Adhwaa; Aldibasi, Omar; Yilmaz, Burak (2023). Impact of intraoral scanner, scanning strategy, and scanned arch on the scan accuracy of edentulous arches: An in vitro study. (In Press). The journal of prosthetic dentistry Elsevier 10.1016/j.prosdent.2023.01.027

Garcia-Contreras, Rene; Chavez-Granados, Patricia Alejandra; Jurado, Carlos Alberto; Aranda-Herrera, Benjamin; Afrashtehfar, Kelvin I; Nurrohman, Hamid (2023). Natural Bioactive Epigallocatechin-Gallate Promote Bond Strength and Differentiation of Odontoblast-like Cells. Biomimetics, 8(1) MDPI 10.3390/biomimetics8010075

Afrashtehfar, Kelvin I; Jurado, Carlos A; Abu-Fanas, Salem H; Jaber, Mohamed A (2023). Health and Well-Being through COVID-19 Vaccination: Physical, Oral, and Psychological Effects. International journal of environmental research and public health, 20(4) MDPI 10.3390/ijerph20043117

Afrashtehfar, Kelvin I; Jurado, Carlos A; Al-Sammarraie, Amaweya; Saeed, Musab H (2023). Consequences of COVID-19 and Its Variants: Understanding the Physical, Oral, and Psychological Impact. International journal of environmental research and public health, 20(4) MDPI 10.3390/ijerph20043099

Raabe, Clemens; Schuetz, Tabea S; Chappuis, Vivianne; Yilmaz, Burak; Abou-Ayash, Samir; Couso-Queiruga, Emilio (2023). Accuracy of keyless vs drill-key implant systems for static computer-assisted implant surgery using two guide-hole designs compared to freehand implant placement: an in vitro study. International journal of implant dentistry, 9(1), p. 4. Springer 10.1186/s40729-023-00470-6

Yang, Jing-Wen; Zhu, Yu-Jia; Afrashtehfar, Kelvin I; Zhao, Yi-Jiao; Wang, Yong (2023). Enhanced Lip-Contour During Facial Scan for 3D DSD and Implant Planning: A Blue Screen Approach. The journal of oral implantology, 49(1), pp. 3-7. American Association of Implant Dentistry 10.1563/aaid-joi-D-21-00211

Igarashi, Kensuke; Katagiri, Hiroki; Abou-Ayash, Samir; Schimmel, Martin; Afrashtehfar, Kelvin I. (2023). Double-Crown Prosthesis Retention using Polyetherketoneketone (PEKK): An In Vitro Study. Journal of prosthodontics, 32(2), pp. 154-161. Wiley 10.1111/jopr.13512

Turksayar, Almira Ada Diken; Dönmez, Mustafa Borga (2023). Stress behavior of an anterior single implant restored with high performance polymer abutments under immediate and delayed loading: A 3D FEA study. Journal of prosthodontics, 32(2), pp. 132-138. Wiley 10.1111/jopr.13598

Saponaro, Paola C; Karasan, Duygu; Donmez, Mustafa Borga; Johnston, William Michael; Yilmaz, Burak (2023). Prosthetic complications with monolithic or micro-veneered implant-supported zirconia single-unit, multiple-unit, and complete-arch prostheses on titanium base abutments: A single center retrospective study with mean follow-up period of 72.35 months. Clinical implant dentistry and related research, 25(1), pp. 99-106. Wiley 10.1111/cid.13149

Al-Haj Husain, Adib; Stadlinger, Bernd; Özcan, Mutlu; Schönegg, Daphne; Winklhofer, Sebastian; Al-Haj Husain, Nadin; Piccirelli, Marco; Valdec, Silvio (2023). Buccal bone thickness assessment for immediate anterior dental implant planning: A pilot study comparing cone-beam computed tomography and 3D double-echo steady-state MRI. Clinical implant dentistry and related research, 25(1), pp. 35-45. Blackwell 10.1111/cid.13160

Fonseca, Manrique; Molinero-Mourelle, Pedro; Donmez, Mustafa Borga; Janner, Simone Francesco; Yilmaz, Burak (2023). Interim rehabilitation of an edentulous situation with an overdenture retained by short implants during a staged vertical and horizontal ridge augmentation: a dental technique. Quintessence international, 54(4), pp. 296-300. Quintessenz Verlags-GmbH 10.3290/j.qi.b3857201

Lin, Galvin Sim Siang; Tan, Wen-Wu; Tan, Hung-Jia; Khoo, Chia-Wee; Afrashtehfar, Kelvin I (2023). Innovative Pedagogical Strategies in Health Professions Education: Active Learning in Dental Materials Science. International journal of environmental research and public health, 20(3) MDPI 10.3390/ijerph20032041

Yeager, Brandon; Çakmak, Gülce; Zheng, Fengyun; Johnston, William Michael; Yilmaz, Burak (2023). Error analysis of stages involved in CBCT-guided implant placement with surgical guides when different printing technologies are used. (In Press). The journal of prosthetic dentistry Elsevier 10.1016/j.prosdent.2022.11.018

Revilla-León, Marta; Agustín-Panadero, Rubén; Zeitler, Jonathan M; Barmak, Abdul B; Yilmaz, Burak; Kois, John C; Pérez-Barquero, Jorge Alonso (2023). Differences in maxillomandibular relationship recorded at centric relation when using a conventional method, four intraoral scanners, and a jaw tracking system: A clinical study. (In Press). The journal of prosthetic dentistry Elsevier 10.1016/j.prosdent.2022.12.007

Al-Dwairi, Ziad N; Al-Aghbari, Latifah; Al-Haj Husain, Nadin; Özcan, Mutlu (2023). Durability of cantilever inlay-retained fixed dental prosthesis fabricated from multilayered zirconia ceramics with different designs. Journal of the mechanical behavior of biomedical materials, 137, p. 105547. Elsevier 10.1016/j.jmbbm.2022.105547

Abou-Ayash, Samir; Mathey, Amber; Gäumann, Fabio; Mathey, Ayse; Donmez, Mustafa Borga; Yilmaz, Burak (2023). Erratum to 'In vitro scan accuracy and time efficiency in various implant-supported fixed partial denture situations' [Journal of Dentistry 127C (2022) 104358]. Journal of dentistry, 128(104383), p. 104383. Elsevier Science 10.1016/j.jdent.2022.104383

Yilmaz, Burak; Alsaery, Amani; Bowen, Luke; Abou-Ayash, Samir; Seghi, Robert (2023). Influence of cyclic loading on load-to-failure of different ceramic CAD-CAM implant-supported single crowns. The international journal of prosthodontics, 36(1), 42–48. Quintessence Publishing 10.11607/ijp.6510

Abou-Ayash, Samir; Schimmel, Martin; Worni, Andreas; Enkling, Norbert (2023). O-Ring Attachments on One-Piece Mini Dental Implants: In-Vitro Analysis of Retention Force Reproducibility Using Different Pristine Matrix-O-Ring Combinations. The international journal of prosthodontics, 36(1), 59–62. Quintessence Publishing 10.11607/ijp.7055

Enkling, Norbert; Thanendrarajah, Thanuja; Mathey, Ayse; Janner, Simone; Schimmel, Martin; Abou-Ayash, Samir (2023). Soft Loading Protocol of Short Strategic Implants in Posterior Mandibles Supporting Removable Bilateral Free-End Prostheses: 1-Year Results of a Prospective Cohort Study. The international journal of prosthodontics, 36(3), 282–292. Quintessence Publishing 10.11607/ijp.7827

Al-Haj Husain, Nadin; Al-Haj Husain, Adib; Grgic, Ivo; Kipar, Anja; Molinero-Mourelle, Pedro; Stadlinger, Bernd; Özcan, Mutlu (2023). Effect of Cumulative Ionizing Radiation on Flexural Strength, Flexural Modulus, and Elasticity Modulus of Dentin in Unerupted Human Third Molars. Advances in radiation oncology, 8(2), p. 101127. Elsevier 10.1016/j.adro.2022.101127

Schimmel, Martin; Anliker, Noemi; Panca Sabatini, Gabriela; Silva de Paula, Marcella; Weber, Adrian Roman; Molinero-Mourelle, Pedro (2023). Assessment and Improvement of Masticatory Performance in Frail Older People: A Narrative Review. Journal of clinical medicine, 12(11), p. 3760. MDPI 10.3390/jcm12113760

Jaber, M A; Abdelmagied, M; El-Ameen, E M; Afrashtehfar, K I (2023). COVID-19 Vaccine Acceptance among Ajman Undergraduate Dental Students: A Cross-Sectional Study. International journal of dentistry, 2023, p. 3511960. 10.1155/2023/3511960

Akay, Canan; Çakmak, Gülce; Donmez, Mustafa Borga; Abou-Ayash, Samir; Mumcu, Emre; Pat, Suat; Yilmaz, Burak (2023). Flexural Strength and Vickers Microhardness of Graphene-Doped SnO2 Thin-Film-Coated Polymethylmethacrylate after Thermocycling. Coatings, 13(6), p. 1106. MDPI 10.3390/coatings13061106

Güven, Mehmet Esad; Çakmak, Gülce; Dönmez, Mustafa Borga; Yilmaz, Burak (2023). Evaluation of Dimensional Stability and Occlusal Wear of Additively and Subtractively Manufactured Resin-Based Crowns after Thermomechanical Aging. Applied Sciences, 13(21), p. 11849. MDPI 10.3390/app132111849

2022

Alfallaj, Hayam A; Afrashtehfar, Kelvin I; Asiri, Ali K; Almasoud, Farah S; Alnaqa, Ghaida H; Al-Angari, Nadia S (2022). The Status of Digital Dental Technology Implementation in the Saudi Dental Schools' Curriculum: A National Cross-Sectional Survey for Healthcare Digitization. International journal of environmental research and public health, 20(1) MDPI 10.3390/ijerph20010321

Comuzzi, Luca; Tumedei, Margherita; Romasco, Tea; Petrini, Morena; Afrashtehfar, Kelvin I; Inchingolo, Francesco; Piattelli, Adriano; Di Pietro, Natalia (2022). Insertion Torque, Removal Torque, and Resonance Frequency Analysis Values of Ultrashort, Short, and Standard Dental Implants: An In Vitro Study on Polyurethane Foam Sheets. Journal of Functional Biomaterials, 14(1) MDPI 10.3390/jfb14010010

Çakmak, Gülce; Rusa, Ana Maria; Donmez, Mustafa Borga; Akay, Canan; Kahveci, Çiğdem; Schimmel, Martin; Yilmaz, Burak (2022). Trueness of crowns fabricated by using additively and subtractively manufactured resin-based CAD-CAM materials. (In Press). The journal of prosthetic dentistry Elsevier 10.1016/j.prosdent.2022.10.012

Fonseca, Manrique; Molinero-Mourelle, Pedro; Buser, Ramona; Yilmaz, Burak; Schimmel, Martin (2022). Fabrication of an implant-retained overdenture with ceramic crowns cemented on a polyetherketoneketone framework: A clinical report. The journal of prosthetic dentistry, 128(6), pp. 1152-1157. Elsevier 10.1016/j.prosdent.2021.04.001

Yilmaz, Burak; Gouveia, Diogo; Seghi, Robert; Johnston, William; Lang, Lisa A (2022). Effect of crown height on the screw joint stability of zirconia screw-retained crowns. The journal of prosthetic dentistry, 128(6), pp. 1328-1334. Elsevier 10.1016/j.prosdent.2021.02.027

Revilla-León, Marta; Al-Haj Husain, Nadin; Barmak, Abdul B; Pérez-López, Javier; Raigrodski, Ariel J; Özcan, Mutlu (2022). Chemical Composition and Flexural Strength Discrepancies Between Milled and Lithography-Based Additively Manufactured Zirconia. Journal of prosthodontics, 31(9), pp. 778-783. Wiley 10.1111/jopr.13482

de Araújo, Sara Cristina; Hartmann, Roberto; Curado, Thalita Fernandes Fleury; Schimmel, Martin; Leles, Cláudio Rodrigues (2022). A 3-year prospective cohort on the incidence of prosthodontic complications associated with three implant treatment options for the edentulous mandible. Journal of oral rehabilitation, 49(12), pp. 1155-1162. Wiley 10.1111/joor.13371

Mata-Mata, Severino J; Donmez, Mustafa Borga; Meirelles, Luiz; Johnston, William Michael; Yilmaz, Burak (2022). Influence of digital implant analog design on the positional trueness of an analog in additively manufactured models: An in-vitro study. Clinical implant dentistry and related research, 24(6), pp. 821-830. Wiley 10.1111/cid.13137

Borg-Bartolo, R; Roccuzzo, A; Molinero Mourelle, P; Schimmel, M; Gambetta-Tessini, K; Chaurasia, A; Koca-Ünsal, R B; Tennert, C; Giacaman, R; Campus, G (2022). Global prevalence of edentulism and dental caries in middle-aged and elderly persons. A systematic review and meta-analysis. Journal of dentistry, 127(104335), p. 104335. Elsevier Science 10.1016/j.jdent.2022.104335

Zumstein, Katrin; Fiscalini, Lorenzo; Al-Haj Husain, Nadin; Evci, Erkan; Özcan, Mutlu; Ioannidis, Alexis (2022). Load-bearing capacity of pressable lithium disilicates applied as ultra-thin occlusal veneers on molars. Journal of the mechanical behavior of biomedical materials, 136(105520), p. 105520. Elsevier 10.1016/j.jmbbm.2022.105520

Abou-Ayash, Samir; Mathey, Amber; Gäumann, Fabio; Mathey, Ayse; Donmez, Mustafa Borga; Yilmaz, Burak (2022). In vitro scan accuracy and time efficiency in various implant-supported fixed partial denture situations. Journal of dentistry, 127, p. 104358. Elsevier 10.1016/j.jdent.2022.104358

Yilmaz, Burak; Donmez, Mustafa Borga; Kahveci, Çiğdem; Cuellar, Alfonso Rodrigues; Silva de Paula, Marcella; Schimmel, Martin; Abou-Ayash, Samir; Çakmak, Gülce (2022). Effect of printing layer thickness on the trueness and fit of additively manufactured removable dies. The journal of prosthetic dentistry, 128(6), 1318.e1-1318.e9. Elsevier 10.1016/j.prosdent.2022.10.011

Afrashtehfar, Kelvin I; Jurado, Carlos A; Moshaverinia, Alireza (2022). Dynamic navigation may be used for most implant surgery scenarios due to its satisfactory accuracy. The journal of evidence-based dental practice, 22(4), p. 101797. Elsevier 10.1016/j.jebdp.2022.101797

Afrashtehfar, Kelvin I; Weber, Adrian; Abou-Ayash, Samir (2022). Titanium-base abutments may have similar long-term peri-implant effects as non-bonded one-piece abutments. Evidence-based dentistry, 23(4), pp. 134-135. Springer Nature 10.1038/s41432-022-0835-9

Zaugg, Fiona Leandra; Zimmermann, Patrick; Fonseca, Manrique; Abou-Ayash, Samir (2022). Digitale Klammerprothese - Chancen und Limitationen. Quintessenz Zahntechnik, 48, pp. 1164-1172. Quintessence Publishing

Mayinger, Felicitas; Buser, Ramona; Laier, Maximilian; Schönhoff, Lisa Marie; Kelch, Matthias; Hampe, Rüdiger; Stawarczyk, Bogna (2022). Impact of the material and sintering protocol, layer thickness, and thermomechanical aging on the two-body wear and fracture load of 4Y-TZP crowns. Clinical oral investigations, 26(11), pp. 6617-6628. Springer-Verlag 10.1007/s00784-022-04616-5

Arakawa-Kaneko, Itsuka; Watarai, Yuko; Schimmel, Martin; Abou-Ayash, Samir (2022). Relationship between tongue pressure and hand-grip strength: A systematic review and meta-analysis. Journal of oral rehabilitation, 49(11), pp. 1087-1105. Wiley 10.1111/joor.13362

Biadsee, Ameer; Özcan, Mutlu; Masarwa, Lubaba; Haddad, Mishel; Al-Haj Husain, Nadin; Ormianer, Zeev (2022). Effect of Titanium-Base Abutment Height on Optical Properties of Monolithic Anterior Zirconia Crowns. Materials, 15(21) Molecular Diversity Preservation International MDPI 10.3390/ma15217643

Alshehri, Abdullah; Almutairi, Basil; Jurado, Carlos A; Afrashtehfar, Kelvin I; Albarrak, Shug; Alharbi, Asma; Alenazi, Alanoud; Nurrohman, Hamid; Alshabib, Abdulrahman (2022). Biomimetic Whitening Effect of Polyphosphate-Bleaching Agents on Dental Enamel. Biomimetics, 7(4) MDPI 10.3390/biomimetics7040183

Ogawa, Yuko; Sayed, Mahmoud; Hiraishi, Noriko; Al-Haj Husain, Nadin; Tagami, Junji; Özcan, Mutlu; Shimada, Yasushi (2022). Effect of Surface Pre-Reacted Glass Ionomer Containing Dental Sealant on the Inhibition of Enamel Demineralization. Journal of Functional Biomaterials, 13(4) MDPI 10.3390/jfb13040189

Wittneben, Julia G.; Igarashi, Kensuke; Brägger, Urs; Buser, Daniel; Schimmel, Martin; Wismeijer, Daniel (2022). Vertical eruption of anterior maxillary teeth adjacent to single-implant-supported crowns: An assessment after a 3-year follow-up period. The journal of prosthetic dentistry, 128(4), pp. 605-610. Elsevier 10.1016/j.prosdent.2020.07.040

Ozan, Oğuz; Şeker, Emre; Cakmak, Gülce; Guo, Xiaohan; Yilmaz, Burak (2022). Effect of guide sleeve material, region, diameter, and number of times drills were used on the material loss from sleeves and drills used for surgical guides: An in vitro study. The journal of prosthetic dentistry, 128(4), pp. 746-753. Elsevier 10.1016/j.prosdent.2020.12.036

Schimmel, Martin; Rachais, Elias; Al-Haj Husain, Nadin; Müller, Frauke; Srinivasan, Murali; Abou-Ayash, Samir (2022). Assessing masticatory performance with a color mixing-ability test using smartphone camera images. Journal of oral rehabilitation, 49(10), pp. 961-969. Wiley 10.1111/joor.13352

Cintra Mailart, Mariane; Berli, Pavel Claudio; Borges, Alessandra Bühler; Yilmaz, Burak; Baumann, Tommy; Saads Carvalho, Thiago (2022). Pellicle modification with natural bioproducts: Influence on tooth color under erosive conditions. European journal of oral sciences, 130(5), e12886. Wiley-Blackwell 10.1111/eos.12886

Molinero-Mourelle, Pedro; Bischof, Frank; Yilmaz, Burak; Schimmel, Martin; Abou-Ayash, Samir (2022). Clinical performance of tooth implant-supported removable partial dentures: a systematic review and meta-analysis. Clinical oral investigations, 26(10), pp. 6003-6014. Springer-Verlag 10.1007/s00784-022-04622-7

Çakmak, Gülce; Donmez, Mustafa Borga; Akay, Canan; Atalay, Sevda; Silva de Paula, Marcella; Schimmel, Martin; Yilmaz, Burak (2022). Effect of simulated brushing and disinfection on the surface roughness and color stability of CAD-CAM denture base materials. Journal of the mechanical behavior of biomedical materials, 134, p. 105390. Elsevier 10.1016/j.jmbbm.2022.105390

Müller, Frauke; Srinivasan, Murali; Krause, Karl-Heinz; Schimmel, Martin (2022). Periodontitis and peri-implantitis in elderly people experiencing institutional and hospital confinement. Periodontology 2000, 90(1), pp. 138-145. Wiley 10.1111/prd.12454

Al-Haj Husain, Nadin; Feilzer, Albert J; Kleverlaan, Cornelis J; Abou-Ayash, Samir; Özcan, Mutlu (2022). Effect of hydrothermal aging on the microhardness of high- and low-viscosity conventional and additively manufactured polymers. The journal of prosthetic dentistry, 128(4), 822.e1-822.e9. Elsevier 10.1016/j.prosdent.2022.08.022

Jurado, Carlos A; Parachuru, Venkata; Villalobos Tinoco, Jose; Guzman-Perez, Gerardo; Tsujimoto, Akimasa; Javvadi, Ramya; Afrashtehfar, Kelvin I (2022). Diagnostic Mock-Up as a Surgical Reduction Guide for Crown Lengthening: Technique Description and Case Report. Medicina, 58(10) MDPI 10.3390/medicina58101360

Betthäuser, M; Schilter, R; Enkling, N; Suter, V G A; Abou-Ayash, S; Schimmel, M (2022). Clinical outcomes of different implant types in mandibular bar-retained overdentures: a retrospective analysis with up to 20 years follow-up. International journal of implant dentistry, 8(1), p. 38. Springer 10.1186/s40729-022-00439-x

Çakmak, Gülce; Molinero-Mourelle, Pedro; Silva de Paula, Marcella; Akay, Canan; Cuellar, Alfonso Rodriguez; Donmez, Mustafa Borga; Yilmaz, Burak (2022). Surface Roughness and Color Stability of 3D-Printed Denture Base Materials after Simulated Brushing and Thermocycling. Materials, 15(18) Molecular Diversity Preservation International MDPI 10.3390/ma15186441

Hashemi, Ali Mahmoud; Hashemi, Hamid Mahmoud; Siadat, Hakimeh; Shamshiri, Ahmadreza; Afrashtehfar, Kelvin Ian; Alikhasi, Marzieh (2022). Fully Digital versus Conventional Workflows for Fabricating Posterior Three-Unit Implant-Supported Reconstructions: A Prospective Crossover Clinical Trial. International journal of environmental research and public health, 19(18) MDPI 10.3390/ijerph191811456

Vazquez, Lydia; Buser, Ramona; Carrel, Jean-Pierre (2022). Mesiodistal Measurements for Dental Implant Planning: A Prospective Clinical Study of Linear Measurements on Cone-Beam Computed Tomography Images in Comparison with Caliper-Based Measurements on Plaster Casts. Dentistry journal, 10(9) MDPI 10.3390/dj10090169

Stoilov, Milan; Stoilov, Lea; Enkling, Norbert; Stark, Helmut; Winter, Jochen; Marder, Michael; Kraus, Dominik (2022). Effects of Different Titanium Surface Treatments on Adhesion, Proliferation and Differentiation of Bone Cells: An In Vitro Study. Journal of Functional Biomaterials, 13(3) MDPI 10.3390/jfb13030143

Strasding, Malin; Abou-Ayash, Samir; Laziok, Thomas; Doerken, Sam; Kohal, Ralf-Joachim; Patzelt, Sebastian Berthold Maximilian (2022). Non-Precious Metal Alloy Double Crown-Retained Removable Partial Dentures: A Cross-Sectional In Vivo Investigation. Materials, 15(17) Molecular Diversity Preservation International MDPI 10.3390/ma15176137

Mulla, Salah H.; Seghi, Robert R.; Johnston, William M,; Yilmaz, Burak (2022). Effect of cyclic loading on reverse torque values of angled screw channel systems. The journal of prosthetic dentistry, 128(3), pp. 458-466. Elsevier 10.1016/j.prosdent.2020.12.020

Arakawa, Itsuka; Al-Haj Husain, Nadin; Srinivasan, Murali; Maniewicz, Sabrina; Abou-Ayash, Samir; Schimmel, Martin (2022). Clinical outcomes and costs of conventional and digital complete dentures in a university clinic: A retrospective study. The journal of prosthetic dentistry, 128(3), pp. 390-395. Elsevier 10.1016/j.prosdent.2020.12.014

Durkan, Rukiye; Deste Gökay, Gonca; Şimşek, Hatice; Yilmaz, Burak (2022). Biaxial flexural strength and phase transformation characteristics of dental monolithic zirconia ceramics with different sintering durations: An in vitro study. The journal of prosthetic dentistry, 128(3), pp. 498-504. Elsevier 10.1016/j.prosdent.2021.04.003

Ozkir, Serhat Emre; Bicer, Mehmet; Deste, Gonca; Karakus, Elif; Yilmaz, Burak (2022). Wear of monolithic zirconia against different CAD-CAM and indirect restorative materials. The journal of prosthetic dentistry, 128(3), pp. 505-511. Elsevier 10.1016/j.prosdent.2021.03.023

Halis, Gizem; Köroğlu, Ayşegül; Şahin, Onur; Dede, Doğu Ömür; Yilmaz, Burak (2022). Effect of simulated tootbrushing on surface roughness of sealant agent coupled nanohybrid composite resins. Journal of esthetic and restorative dentistry, 34(6), pp. 907-914. Wiley 10.1111/jerd.12871

Zaugg, Fiona-Leandra; Molinero-Mourelle, Pedro; Abou-Ayash, Samir; Schimmel, Martin; Brägger, Urs; Wittneben, Julia-Gabriela (2022). The influence of age and gender on perception of orofacial esthetics among laypersons in Switzerland. Journal of esthetic and restorative dentistry, 34(6), pp. 959-968. Wiley 10.1111/jerd.12906

Turksayar, Almira Ada Diken; Donmez, Mustafa Borga; Olcay, Emin Orkun; Demirel, Münir; Demir, Esra (2022). Effect of printing orientation on the fracture strength of additively manufactured 3-unit interim fixed dental prostheses after aging. Journal of dentistry, 124, p. 104155. Elsevier Science 10.1016/j.jdent.2022.104155

Donmez, Mustafa Borga; Çakmak, Gülce; Atalay, Sevda; Yilmaz, Hakan; Yilmaz, Burak (2022). Trueness and precision of combined healing abutment-scan body system depending on the scan pattern and implant location: an in-vitro study. Journal of dentistry, 124, p. 104169. Elsevier Science 10.1016/j.jdent.2022.104169

Zonnenberg, Adriaan J J; Türp, Jens Christoph; Greene, Charles S (2022). Letter to the Editor - JOR RE: Paper by Fornai C, Tester I, Parlett K, Basili C, Costa HN. Journal of oral rehabilitation, 49(9), pp. 935-936. Wiley 10.1111/joor.13346

Südbeck, Sonja; Hoffmann, Moritz; Reymus, Marcel; Buser, Ramona; Edelhoff, Daniel; Stawarczyk, Bogna (2022). Bending moment of implants restored with CAD/CAM polymer-based restoration materials with or without a titanium base before and after artificial aging. Dental materials, 38(9), e245-e255. Elsevier 10.1016/j.dental.2022.06.009

Jonovic, Katarina; Özcan, Mutlu; Al-Haj Husain, Nadin; Mätzener, Kiren Jan; Ciernik, Ilja Frank (2022). Evaluation of radiodensity and dimensional stability of polymeric materials used for oral stents during external beam radiotherapy of head and neck carcinomas. Clinical and translational radiation oncology, 36, pp. 31-39. Elsevier 10.1016/j.ctro.2022.06.006

Donmez, Mustafa Borga; Okutan, Yener (2022). Marginal gap and fracture resistance of implant-supported 3D-printed definitive composite crowns: an in vitro study. Journal of dentistry, 124, p. 104216. Elsevier 10.1016/j.jdent.2022.104216

Gouveia, Diogo; Yilmaz, Burak; Cevik, Pinar; Johnston, William Michael (2022). Using Kubelka-Munk reflectance theory to predict optimal pink composite thickness and shade with an opaqued PEEK background for a final gingival color: An in vitro study. Dental materials, 38(9), pp. 1452-1458. Elsevier 10.1016/j.dental.2022.06.027

Çakmak, Gülce; Donmez, Mustafa Borga; Cuellar, Alfonso Rodrigues; Kahveci, Çiğdem; Schimmel, Martin; Yilmaz, Burak (2022). Additive or subtractive manufacturing of crown patterns used for pressing or casting: a trueness analysis. Journal of dentistry, 124, p. 104221. Elsevier 10.1016/j.jdent.2022.104221

Molinero-Mourelle, Pedro; Roccuzzo, Andrea; Yilmaz, Burak; Lam, Walter Yu Hang; Pow, Edmond H N; Del Río Highsmith, Jaime; Gómez-Polo, Miguel (2022). Microleakage assessment of CAD-CAM Cobalt-Chrome and Zirconia abutments on a conical connection dental implant: A comparative in vitro study. Clinical oral implants research, 33(9), pp. 945-952. Wiley-Blackwell 10.1111/clr.13973

Leles, Cláudio Rodrigues; de Paula, Marcella Silva; Curado, Thalita Fernandes Fleury; Silva, Jésio Rodrigues; Leles, José Luiz Rodrigues; McKenna, Gerald; Schimmel, Martin (2022). Flapped versus flapless surgery and delayed versus immediate loading for a four mini implant mandibular overdenture: a RCT on post-surgical symptoms and short-term clinical outcomes. Clinical oral implants research, 33(9), pp. 953-964. Wiley-Blackwell 10.1111/clr.13974

Giugovaz, Adriana; Pérez-Giugovaz, Marcelo Gabriel; Al-Haj Husain, Nadin; Barmak, Abdul B; Özcan, Mutlu; Revilla-León, Marta (2022). Flexural strength of aged and nonaged interim materials fabricated by using milling, additive manufacturing, and a combination of subtractive and additive methods. The journal of prosthetic dentistry, 128(3), 513.e1-513.e11. Elsevier 10.1016/j.prosdent.2022.05.004

Jia, Ping-Yi; Liu, Qi; Yang, Jing-Wen; Jiang, Xiao-Tong; Afrashtehfar, Kelvin I (2022). Three-dimensional macroscopical quantification of plaque accumulation on implant-supported fixed complete dental prostheses surfaces: A methodological pilot study. The journal of prosthetic dentistry, 128(3), 467.e1-467.e8. Elsevier 10.1016/j.prosdent.2021.11.008

Afrashtehfar, Kelvin I; Alnakeb, Naden A; Assery, Mansour K M (2022). Accuracy of intraoral scanners versus traditional impressions: a rapid umbrella review. The journal of evidence-based dental practice, 22(3), p. 101719. Elsevier 10.1016/j.jebdp.2022.101719

Köroğlu, Ayşegül; Şahin, Onur; Küçükekenci, Ahmet Serkan; Dede, Doğu Ömür; Yıldırım, Hüsniye; Yilmaz, Burak (2022). Influences of Toothbrushing and Different Toothpastes on the Surface Roughness and Color Stability of Interim Prosthodontic Materials. Materials, 15(17) Molecular Diversity Preservation International MDPI 10.3390/ma15175831

Al-Haj Husain, Nadin; Özcan, Mutlu; Dydyk, Nataliya; Joda, Tim (2022). Conventional, Speed Sintering and High-Speed Sintering of Zirconia: A Systematic Review of the Current Status of Applications in Dentistry with a Focus on Precision, Mechanical and Optical Parameters. Journal of clinical medicine, 11(16) MDPI 10.3390/jcm11164892

Çakmak, Gülce; Donmez, Mustafa Borga; Atalay, Sevda; Silva de Paula, Marcella; Fonseca, Manrique; Schimmel, Martin; Yilmaz, Burak (2022). Surface roughness and stainability of CAD-CAM denture base materials after simulated brushing and coffee thermocycling. (In Press). The journal of prosthetic dentistry Elsevier 10.1016/j.prosdent.2022.06.006

Rodrigues Leles, Cláudio; Nascimento, Lays Noleto; Rodrigues Silva, Jésio; Silva de Paula, Marcella; Fernandes Fleury Curado, Thalita; McKenna, Gerald; Schimmel, Martin (2022). Willingness to accept or refuse mandibular implant overdenture treatment: a prospective study on edentulous subjects enrolled in a clinical trial (Submitted). Journal of oral rehabilitation Wiley

Di Fiore, Adolfo; Montagner, Mattia; Sivolella, Stefano; Stellini, Edoardo; Yilmaz, Burak; Brunello, Giulia (2022). Peri-Implant Bone Loss and Overload: A Systematic Review Focusing on Occlusal Analysis through Digital and Analogic Methods. Journal of clinical medicine, 11(16) MDPI 10.3390/jcm11164812

Jurado, Carlos A; Amarillas-Gastelum, Clarisa; Afrashtehfar, Kelvin I; Argueta-Figueroa, Liliana; Fischer, Nicholas G; Alshabib, Abdulrahman (2022). Ceramic and Composite Polishing Systems for Milled Lithium Disilicate Restorative Materials: A 2D and 3D Comparative In Vitro Study. Materials, 15(15) Molecular Diversity Preservation International MDPI 10.3390/ma15155402

Fonseca, Manrique; Haro-Adanez, Mireia; Pieralli, Stefano; Bresavscek, Miha; Yilmaz, Burak; Att, Wael (2022). Short versus regular-length implants to rehabilitate partially edentulous mandible: a 2-year prospective split-mouth clinical study. Journal of oral implantology, 48(4), pp. 277-284. American Association of Implant Dentistry 10.1563/aaid-joi-D-20-00315

Subaşı, Meryem Gülce; Çakmak, Gülce; Sert, Murat; Yilmaz, Burak (2022). Effect of multiple firings on surface roughness and flexural strength of CAD-CAM ceramics. The journal of prosthetic dentistry, 128(2), 216.e1-216.e8. Elsevier 10.1016/j.prosdent.2022.05.021

Carneiro Pereira, Ana Larisse; Medeiros, Vitória Ramos; Campos, Maria de Fátima Trindade Pinto; de Medeiros, Annie Karoline Bezerra; Yilmaz, Burak; Carreiro, Adriana da Fonte Porto (2022). Conventional and digital impressions for complete-arch implant-supported fixed prostheses: time, implant quantity effect and patient satisfaction. The journal of advanced prosthodontics, 14(4), pp. 212-222. Korean Academy of Prosthodontics 10.4047/jap.2022.14.4.212

Di Fiore, Adolfo; Meneghello, Roberto; Brun, Paola; Rosso, Stefano; Gattazzo, Alberto; Stellini, Edoardo; Yilmaz, Burak (2022). Comparison of the flexural and surface properties of milled, 3D-printed, and heat polymerized PMMA resins for denture bases: an in vitro study. Journal of prosthodontic research, 66(3), pp. 502-508. Elsevier 10.2186/jpr.JPR_D_21_00116

Kanzler Abdel Raouf, Valérie; Jockusch, Julia; Al-Haj Husain, Nadin; Dydyk, Nataliya; Özcan, Mutlu (2022). Push-Out Bond Strength Assessment of Different Post Systems at Different Radicular Levels of Endodontically Treated Teeth. Materials, 15(15) Molecular Diversity Preservation International MDPI 10.3390/ma15155134

Abou-Ayash, Samir; Rudaz, Anne-Carole; Janner, Simone; Kraus, Dominik; Schimmel, Martin; Enkling, Norbert (2022). Converting Bilateral Free-End Removable Partial Dentures to Implant-Assisted Removable Partial Dentures Using 6 mm Short Implants: Patient-Reported Outcomes of a Prospective Clinical Study. International journal of environmental research and public health, 19(15) MDPI 10.3390/ijerph19158998

Ugurlu, Muhittin; Al-Haj Husain, Nadin; Özcan, Mutlu (2022). Color Change after 25% Hydrogen Peroxide Bleaching with Photoactivation: A Methodological Assessment Using Spectrophotometer versus Digital Photographs. Materials, 15(14) Molecular Diversity Preservation International MDPI 10.3390/ma15145045

Eslemez Topcu, Eda; Şahin, Onur; Köroğlu, Ayşegül; Cömert, Füsun; Yilmaz, Burak (2022). Surface roughness and Streptococcus mutans adhesion on surface sealant agent coupled interim crown materials after dynamic loading. BMC Oral Health, 22(1), p. 299. BioMed Central 10.1186/s12903-022-02323-x

Ugurlu, Muhittin; Al-Haj Husain, Nadin; Özcan, Mutlu (2022). Repair of Bulk-Fill and Nanohybrid Resin Composites: Effect of Surface Conditioning, Adhesive Promoters, and Long-Term Aging. Materials, 15(13) Molecular Diversity Preservation International MDPI 10.3390/ma15134688

Al-Haj Husain, Nadin; Dürr, Tobias; Özcan, Mutlu; Brägger, Urs; Joda, Tim (2022). Mechanical stability of dental CAD-CAM restoration materials made of monolithic zirconia, lithium disilicate, and lithium disilicate-strengthened aluminosilicate glass ceramic with and without fatigue conditions. The journal of prosthetic dentistry, 128(1), pp. 73-78. Elsevier 10.1016/j.prosdent.2020.12.002

Sasany, Rafat; Yilmaz, Burak (2022). Effect of stain brand and shade on color stability of stains applied on a CAD-CAM feldspathic ceramic. Odontology, 110(3), pp. 452-459. Springer 10.1007/s10266-021-00676-3

Sáez-Alcaide, Luis Miguel; Cortés-Bretón-Brinkmann, Jorge; Sánchez-Labrador, Luis; Pérez-González, Fabián; Forteza-López, Alba; Molinero-Mourelle, Pedro; López-Quiles, Juan (2022). Patient-reported outcomes in patients with severe maxillary bone atrophy restored with zygomatic implant-supported complete dental prostheses: a systematic review. Acta odontologica Scandinavica, 80(5), pp. 363-373. Taylor & Francis 10.1080/00016357.2021.2018494

Elbashti, Mahmoud E; Aswehlee, Amel; Rahman, Marwa Abdel; Sumita, Yuka I; Bornstein, Michael M; Schimmel, Martin; Abou-Ayash, Samir; Molinero Mourelle, Pedro (2022). Triangular mesh reduction of digitized maxillectomy defects for prosthetic rehabilitation: A 3D deviation study. Journal of dentistry, 122(104090), p. 104090. Elsevier Science 10.1016/j.jdent.2022.104090

Cakmak, Gulce; Rizzo Marques, Vinicius; Donmez, Mustafa Borga; Lu, Wei-En; Abou-Ayash, Samir; Yilmaz, Burak (2022). Comparison of measured deviations in digital implant scans depending on software and operato. Journal of dentistry, 122, p. 104154. Elsevier Science 10.1016/j.jdent.2022.104154

Sert, Murat; Subaşı, Meryem Gülce; Donmez, Mustafa Borga; Çakmak, Gülce; Yilmaz, Burak (2022). Effect of firing cycle and aging on long-term chemical degradation of monolithic CAD-CAM ceramics. The journal of prosthetic dentistry, 128(1), 89.e1-89.e10. Elsevier 10.1016/j.prosdent.2022.04.028

Alikhasi, Marzieh; Yousefi, Parisa; Afrashtehfar, Kelvin I (2022). Smile Design: Mechanical Considerations. Dental clinics of North America, 66(3), pp. 477-487. Elsevier 10.1016/j.cden.2022.02.008

Dulla, Fabrice A; Bazelli, Nando L; Wirthner, Adrian; Marti, Franziska; Suter, Valerie G A (2022). Orale Anzeichen der Syphilis. Quintessenz Zahnmedizin, 73(7), pp. 690-695. Quintessenz Verlag

Cakmak, Gülce; Akay, Canan; Dönmez, Mustafa Borga; Mumcu, Emre; Akan, Handan Sevim; Sasany, Rafat; Abou-Ayash, Samir; Yilmaz, Burak (2022). Effect of Potassium Aluminum Sulfate Application on the Viability of Fibroblasts on a CAD-CAM Feldspathic Ceramic before and after Thermocycling. Materials, 15(12), p. 4232. Molecular Diversity Preservation International MDPI 10.3390/ma15124232

Donmez, Mustafa Borga; Olcay, Emin Orkun; Demirel, Münir (2022). Load-to-Failure Resistance and Optical Characteristics of Nano-Lithium Disilicate Ceramic after Different Aging Processes. Materials, 15(11) Molecular Diversity Preservation International MDPI 10.3390/ma15114011

Cakmak, Gülce; Yilmaz, Hakan; Treviño Santos, Alejandro; Kökat, Ali Murat; Yilmaz, Burak (2022). Effect of Scanner Type and Scan Body Location on the Accuracy of Mandibular Complete-Arch Digital Implant Scans: An In Vitro Study. Journal of prosthodontics, 31(5), pp. 419-426. Wiley 10.1111/jopr.13418

Hensel, Justine; Reise, Michael; Liebermann, Anja; Buser, Ramona; Stawarczyk, Bogna (2022). Impact of multiple firings on fracture load of veneered zirconia restorations. Journal of the mechanical behavior of biomedical materials, 130, p. 105213. Elsevier 10.1016/j.jmbbm.2022.105213

Enkling, Norbert; Marder, Michael; Bayer, Stefan; Götz, Werner; Stoilov, Milan; Kraus, Dominik (2022). Soft tissue response to different abutment materials: A controlled and randomized human study using an experimental model. Clinical oral implants research, 33(6), pp. 667-679. Wiley-Blackwell 10.1111/clr.13932

Sert, Murat; Çakmak, Gülce; Subaşı, Meryem Gülce; Donmez, Mustafa Borga; Yilmaz, Burak (2022). Effect of different surface treatments and thermomechanical aging on the ion elution of CAD-CAM materials. The journal of prosthetic dentistry, 127(6), 926.e1-926.e10. Elsevier 10.1016/j.prosdent.2022.03.021

Afrashtehfar, Kelvin Ian; Desai, Vijay B; Afrashtehfar, Cyrus D M (2022). Preoperative administration of amoxicillin is not recommended in healthy patients undergoing implant surgery. Evidence-based dentistry, 23(2), pp. 78-80. Springer Nature 10.1038/s41432-022-0266-7

Mathey, Ayse; Stalder, Anja; Schimmel, Martin (2022). Herstellungsprotokoll CAD/CAM-gefertigter Totalprothesen. Die zahnärztliche Praxis(5/6), pp. 12-14. Verlag Neuer Merkur

Çakmak, Gülce; Cuellar, Alfonso Rodriguez; Donmez, Mustafa Borga; Abou-Ayash, Samir; Lu, Wei-En; Schimmel, Martin; Yilmaz, Burak (2022). Effect of printing layer thickness on the trueness of 3-unit interim fixed partial dentures. (In Press). The journal of prosthetic dentistry Elsevier 10.1016/j.prosdent.2022.04.015

Scherer, Michael D; Al-Haj Husain, Nadin; Barmak, Abdul B; Kois, John C; Özcan, Mutlu; Revilla-León, Marta (2022). Influence of postprocessing rinsing solutions and duration on flexural strength of aged and nonaged additively manufactured interim dental material. (In Press). The journal of prosthetic dentistry Elsevier 10.1016/j.prosdent.2022.03.034

Castro-Calderón, Adriana; Roccuzzo, Andrea; Ferrillo, Martina; Gada, Sneha; González-Serrano, José; Fonseca, Manrique; Molinero-Mourelle, Pedro (2022). Hyaluronic acid injection to restore the lost interproximal papilla: a systematic review. Acta odontologica scandinavica, 80(4), pp. 295-307. Informa Healthcare 10.1080/00016357.2021.2007282

Kümbüloğlu, Övül; Koyuncu, Beril; Yerlioğlu, Gözde; Al-Haj Husain, Nadin; Özcan, Mutlu (2022). Stress Distribution on Various Implant-Retained Bar Overdentures. Materials, 15(9) Molecular Diversity Preservation International MDPI 10.3390/ma15093248

El-Askary, Farid; Hassanein, Abdullah; Aboalazm, Emad; Al-Haj Husain, Nadin; Özcan, Mutlu (2022). A Comparison of Microtensile Bond Strength, Film Thickness, and Microhardness of Photo-Polymerized Luting Composites. Materials, 15(9) Molecular Diversity Preservation International MDPI 10.3390/ma15093050

Zarean, Parichehr; Özcan, Mutlu; Zarean, Paridokht; Haghani, Seyed Omid; Jahromi, Maryam Zare; Al-Haj Husain, Nadin; Khabiri, Masoud (2022). Micro-Computed Tomographic Assessment of Microcrack Formation before and after Instrumentation of Curved Root Canals with Neoniti Rotary Files. Materials, 15(9) Molecular Diversity Preservation International MDPI 10.3390/ma15093002

Gama, Lorena Tavares; Bezerra, Adriana Pinto; Schimmel, Martin; Rodrigues Garcia, Renata Cunha Matheus; de Luca Canto, Graziela; Gonçalves, Thais Marques Simek Vega (2022). Clinical performance of polymer frameworks in dental prostheses: A systematic review. (In Press). The journal of prosthetic dentistry Elsevier 10.1016/j.prosdent.2022.03.002

Deste Gokay, Gonca; Ozkir, Serhat Emre; Wolf, Thomas Gerhard; Gokcimen, Gulsum; Rona, Nergiz; Bicer, Mehmet; Yilmaz, Burak (2022). The Effect of Denture Cleansing Solutions on the Retention of Precision Attachments: An In Vitro Study. International journal of environmental research and public health, 19(7) MDPI 10.3390/ijerph19074345

Belgin, Hüseyin Berkay; Kale, Ediz; Özçelik, Tuncer Burak; Yilmaz, Burak (2022). Marginal fit of 3-unit CAD-CAM zirconia frameworks fabricated using cone beam computed tomography scans: an experimental study. Odontology, 110(2), pp. 339-348. Springer 10.1007/s10266-021-00668-3

Bousiou, Andrianna; Konstantopoulou, Kalliopi; Polychronopoulou, Argy; Halazonetis, Demetrios J; Schimmel, Martin; Kossioni, Anastassia E (2022). Sociomedical and oral factors affecting masticatory performance in an older population. Clinical oral investigations, 26(4), pp. 3477-3486. Springer 10.1007/s00784-021-04316-6

Kırmalı, Ömer; Türker, Nurullah; Akar, Türker; Yilmaz, Burak (2022). Finite element analysis of stress distribution in autotransplanted molars. Journal of dentistry, 119, p. 104082. Elsevier Science 10.1016/j.jdent.2022.104082

Kheur, Mohit; Lakha, Tabrez; Shaikh, Saleha; Kheur, Supriya; Qamri, Batul; Zhen, Lee Wan; Al-Haj Husain, Nadin; Özcan, Mutlu (2022). A Comparative Study on Simulated Chairside Grinding and Polishing of Monolithic Zirconia. Materials, 15(6) Molecular Diversity Preservation International MDPI 10.3390/ma15062202

Müller, Nicolas; Al-Haj Husain, Nadin; Chen, Liang; Özcan, Mutlu (2022). Adhesion of Different Resin Cements to Zirconia: Effect of Incremental versus Bulk Build Up, Use of Mould and Ageing. Materials, 15(6) Molecular Diversity Preservation International MDPI 10.3390/ma15062186

Yilmaz, Burak; Rizzo Marques, Vinicius; Dönmez, Mustafa-Borga; Cuellar, Alfonso Rodriguez; Lu, Wei-En; Abou-Ayash, Samir; Cakmak, Gülce (2022). Influence of 3D analysis software on measured deviations of CAD-CAM resin crowns from virtual design file: an in-vitro study. Journal of dentistry, 118, p. 103933. Elsevier Science 10.1016/j.jdent.2021.103933

Donmez, Mustafa Borga; Rizzo Marques, Vinicius; Cakmak, Gülce; Yilmaz, Hakan; Schimmel, Martin; Yilmaz, Burak (2022). Congruence between the meshes of a combined healing abutment-scan body system acquired with four different intraoral scanners and the corresponding library file: an in vitro analysis. Journal of dentistry, 118, p. 103938. Elsevier Science 10.1016/j.jdent.2021.103938

Çetiner, Reşat Batuhan; Ergün-Kunt, Göknil; Yüceer-Çetiner, Ezgi; Schimmel, Martin (2022). Masticatory function before and after masticatory muscle-related temporomandibular disorder treatment: An observational study. Journal of oral rehabilitation, 49(3), pp. 295-300. Wiley 10.1111/joor.13286

Schimmel, Martin; Domioni, Tania; Bukvic, Hristina; Arakawa, Itsuka; Seifert, Eberhard; Abou-Ayash, Samir (2022). Oral diadochokinesis and associated oro-facial function in young and old German mother-tongue speakers: A cross-sectional study. Gerodontology, 39(1), pp. 33-40. Wiley-Blackwell 10.1111/ger.12602

Afrashtehfar, Kelvin I; Almomani, Mai M; Momani, Moath (2022). Lack of association between dental implants and oral squamous cell carcinoma. Evidence-based dentistry, 23(1), pp. 40-42. Springer Nature 10.1038/s41432-022-0250-2

Fonseca, Manrique; Lichtmannegger, Alexander (2022). Digitaler Workflow bei der Behandlung eines beschädigten Zahnbestandes. Quintessenz Zahnmedizin, 48(3), pp. 284-289. Quintessenz Verlag

Stuck, Anna K.; Schimmel, Martin (2022). A model for a geriatric teaching programme and its impact on self-rated and tested competencies of undergraduate dental students. European journal of dental education, 26(1), pp. 21-27. Wiley-Blackwell 10.1111/eje.12668

Cobo-Vázquez, C-M; Martín, C; Sáez-Alcaide, L-M; Meniz-García, C; Baca, L; Molinero-Mourelle, Pedro; López-Quiles, J (2022). Burnout syndrome assessment among Spanish oral surgery consultants: A two populations comparative pilot study. Medicina oral, patología oral y cirugía bucal, 27(1), e1-e9. Medicina Oral 10.4317/medoral.24725

Yilmaz, Burak; Diker, Emre; Ovchinnik, Valeriy; Abou-Ayash, Samir (2022). Management of a partially edentulous patient with idiopathic root resorption by using digital and conventional implant planning technologies. The journal of prosthetic dentistry, 127(1), pp. 15-21. Elsevier 10.1016/j.prosdent.2021.01.011

Jacobs, Nicholas; Seghi, Robert; Johnston, William M.; Yilmaz, Burak (2022). Displacement and performance of abutments in narrow-diameter implants with different internal connections. The journal of prosthetic dentistry, 127(1), pp. 100-106. Elsevier 10.1016/j.prosdent.2020.11.008

Enkling, Norbert; Kokoschka, Franziska; Schumacher, Daniel; Kraus, Dominik; Schimmel, Martin; Abou-Ayash, Samir (2022). Influence of the loading protocol and platform switching in two-implant bar-retained overdentures: 3-year results from a randomized controlled equivalence clinical trial. Clinical oral implants research, 33(1), pp. 120-129. Wiley-Blackwell 10.1111/clr.13872

Weber, Adrian Roman; Yilmaz, Burak; Brägger, Urs; Schimmel, Martin; Abou-Ayash, Samir (2022). Relative amount of tooth structure removal in different partial- and full-crown preparation designs. The international journal of prosthodontics, 35(5), 666–675. Quintessence Publishing 10.11607/ijp.7049

Cevik, Pinar; Schimmel, Martin; Yilmaz, Burak (2022). New generation CAD-CAM materials for implant-supported definitive frameworks fabricated by using subtractive technologies. BioMed research international, 2022, p. 3074182. Hindawi Publishing Corporation 10.1155/2022/3074182

Afrashtehfar, Kelvin I; Moawad, Rosalin A; F-Eddin, Afaf W; Wang, Hom-Lay (2022). Mandibular full-arch fixed prostheses supported by three-dental-implants: A protocol of an overview of reviews. PLoS ONE, 17(4), e0265491. Public Library of Science 10.1371/journal.pone.0265491

Leles, Cláudio Rodrigues; Silva, Jésio Rodrigues; Curado, Thalita Fernandes Fleury; Schimmel, Martin; McKenna, Gerald (2022). The Potential Role of Dental Patient-Reported Outcomes (dPROs) in Evidence-Based Prosthodontics and Clinical Care: A Narrative Review. Patient related outcome measures, Volume 13, pp. 131-143. Dove Medical Press 10.2147/PROM.S256724

Velayos-Galán, Laura; Molinero-Mourelle, Pedro; Sevilla, Pablo; Fonseca, Manrique; Mourelle-Martínez, María Rosa; Vera-González, Vicente (2022). Influence of 2% Chlorhexidine on the Bond Strength of Three Adhesive Systems on Primary Molars: An In Vitro Study. Applied Sciences, 12(6), p. 2964. MDPI 10.3390/app12062964

Rizzo Marques, Vinicius; Çakmak, Gülce; Yilmaz, Hakan; Abou-Ayash, Samir; Donmez, Mustafa Borga; Yilmaz, Burak (2022). Effect of Scanned Area and Operator on the Accuracy of Dentate Arch Scans with a Single Implant. Journal of clinical medicine, 11(14), p. 4125. MDPI 10.3390/jcm11144125

Zuercher, Anina N; Molinero Mourelle, Pedro; Schimmel, Martin; Katsoulis, Joannis (2022). Zirconia bars for mandibular implant overdentures: A 1-year clinical and radiographic pilot study. International journal of oral implantology, 15(3), pp. 253-262. Quintessenz

Elbashti, Mahmoud; Molinero-Mourelle, Pedro; Aggarwal, Himanshi; Aswehlee, Amel; Schimmel, Martin; Abou-Ayash, Samir; Yamamori, Tetsuo; Baba, Kazuyoshi; Sumita, Yuka (2022). Feasibility and accuracy of using intraoral scanners to digitize maxillectomy defects for prosthetic rehabilitation: A systematic review. International Journal of Maxillofacial Prosthetics, 5(1), pp. 3-9. 10.26629/ijmp.2022.03

Çakmak, Gülce; Donmez, Mustafa Borga; Silva de Paula, Marcella; Akay, Canan; Chavan, Amit; Schimmel, Martin; Yilmaz, Burak (2022). Surface roughness and stainability of new‑generation denture base materials after brushing and coffee thermocycling (In Press). Journal of materials research Springer 10.1557/s43578-022-00798-6

Çakmak, Gülce; Yilmaz, Hakan; Santos, Alejandro Treviño; Kökat, Ali Murat (2022). Accuracy of Different Complete-Arch Digital Scanning Techniques with a Combined Healing Abutment-Scan Body System. The international journal of oral & maxillofacial implants, 37(1), pp. 67-75. Quintessence Publishing 10.11607/jomi.9209

2021

Akar, Türker; Dündar, Ayşe; Kırmalı, Ömer; Üstün, Özlem; Kapdan, Alper; Er, Hakan; Kuştarcı, Alper; Er, Kürşat; Yilmaz, Burak (2021). Evaluation of the shear bond strength of zirconia to a self-adhesive resin cement after different surface treatment. Dental and medical problems, 58(4), pp. 463-472. Wroclaw Medical University 10.17219/dmp/135652

Bousiou, Andrianna; Konstantopoulou, Kalliopi; Martimianaki, Georgia; Peppa, Eleni; Trichopoulou, Antonia; Polychronopoulou, Argy; Halazonetis, Demetrios J; Schimmel, Martin; Kossioni, Anastassia E (2021). Oral factors and adherence to Mediterranean diet in an older Greek population. Aging clinical and experimental research, 33(12), pp. 3237-3244. Springer 10.1007/s40520-021-01861-8

Cakmak, Gülce; Donmez, Mustafa Borga; Kashkari, Afnan; Johnston, William M; Yilmaz, Burak (2021). Effect of thickness, cement shade, and coffee thermocycling on the optical properties of zirconia reinforced lithium silicate ceramic. Journal of esthetic and restorative dentistry, 33(8), pp. 1132-1138. Wiley-Blackwell 10.1111/jerd.12808

Pérez-González, F; Sánchez-Labrador, L; Molinero-Mourelle, P; Sáez-Alcaide, L M; Cortés-Bretón-Brinkmann, J; Torres García-Denche, J; López-Quiles, J; Martínez-González, J M (2021). Dental implant placement through impacted teeth or residual roots as an alternative to invasive extraction surgeries: a systematic literature review. British journal of oral & maxillofacial surgery, 59(10), pp. 1120-1129. Elsevier 10.1016/j.bjoms.2020.12.018

Atalay, Sevda; Cakmak, Gülce; Dönmez, Mustafa-Borga; Yilmaz, Hakan; Kökat, Ali Murat; Yilmaz, Burak (2021). Effect of implant location and operator on the accuracy of implant scans using a combined healing abutment-scan body system. Journal of dentistry, 115(103855), p. 103855. Elsevier Science 10.1016/j.jdent.2021.103855

Sekulić, Stella; John, Mike T; Bekes, Katrin; Al-Harthy, Mohammad H; Michelotti, Ambra; Reissmann, Daniel R; Nikolovska, Julijana; Sanivarapu, Sahityaveera; Lawal, Folake B; List, Thomas; Čelebić, Asja; Strajnić, Ljiljana; Casassus, Rodrigo; Baba, Kazuyoshi; Schimmel, Martin; Amuasi, Ama; Jayasinghe, Ruwan D; Strujić-Porović, Sanela; Peck, Christopher C; Xie, Han; ... (2021). Frequency of Four-dimensional Oral Health Problems across Dental Fields - a Comparative Survey of Slovenian and International Dentists. Zdravstveno varstvo, 60(4), pp. 210-220. Sciendo 10.2478/sjph-2021-0029

Stilwell, Charlotte; Kalberer, Nicole; Mojon, Philippe; Schimmel, Martin; Srinivasan, Murali; Müller, Frauke (2021). Extra-oral assessment of conventional and CAD-CAM complete denture appearance by dental professionals and CRDP wearers: A randomized survey. Journal of dentistry, 115, p. 103843. Elsevier Science 10.1016/j.jdent.2021.103843

Schimmel, Martin; Walther, Moritz; Al-Haj Husain, Nadin; Igarashi, Kensuke; Wittneben, Julia; Abou-Ayash, Samir (2021). Retention forces between primary and secondary CAD/CAM manufactured telescopic crowns: an in vitro comparison of common material combinations. Clinical oral investigations, 25(11), pp. 6297-6307. Springer 10.1007/s00784-021-03928-2

Schimmel, Martin; Aarab, Ghizlane; Baad-Hansen, Lene; Lobbezoo, Frank; Svensson, Peter (2021). A conceptual model of oro-facial health with an emphasis on function. Journal of oral rehabilitation, 48(11), pp. 1283-1294. Wiley 10.1111/joor.13250

Imamura, Yoshiki; Chebib, Najla; Ohta, Midori; Maria Schulte-Eickhoff, Regina; Mekki, Mustapha; Schimmel, Martin; Arakawa, Itsuka; Graf, Christophe; Sato, Yuji; Müller, Frauke (2021). Validation of a novel diagnostic tool for decreased tongue pressure. Journal of oral rehabilitation, 48(11), pp. 1219-1225. Wiley 10.1111/joor.13232

Mathey, Ayse; Mathey, Yves; Schimmel, Martin (2021). Gerber-Prothetik heute. Quintessenz Zahnmedizin, 47(11), pp. 1276-1280. Quintessenz Verlag

Ferrillo, Martina; Migliario, Mario; Roccuzzo, Andrea; Molinero-Mourelle, Pedro; Falcicchio, Giovanni; Umano, Giuseppina Rosaria; Pezzotti, Federica; Foglio Bonda, Pier Luigi; Calafiore, Dario; de Sire, Alessandro (2021). Periodontal Disease and Vitamin D Deficiency in Pregnant Women: Which Correlation with Preterm and Low-Weight Birth? Journal of clinical medicine, 10(19) MDPI 10.3390/jcm10194578

Yilmaz, Hakan; Eglenen, Merve Nur; Cakmak, Gülce; Yilmaz, Burak (2021). Effect of Impression Technique and Operator Experience on Impression Time and Operator-Reported Outcomes. Journal of prosthodontics, 30(8), pp. 676-683. Wiley 10.1111/jopr.13340

Yang, Jing-Wen; Liu, Qi; Yue, Zhao-Guo; Hou, Jian-Xia; Afrashtehfar, Kelvin I. (2021). Digital Workflow for Full-Arch Immediate Implant Placement Using a Stackable Surgical Guide Fabricated Using SLM Technology. Journal of prosthodontics, 30(8), pp. 645-650. Wiley 10.1111/jopr.13375

Joda, Tim; Gintaute, Aiste; Brägger, Urs; Ferrari, Marco; Weber, Karin; Zitzmann, Nicola U. (2021). Time-efficiency and cost-analysis comparing three digital workflows for treatment with monolithic zirconia implant fixed dental prostheses: A double-blinded RCT. Journal of dentistry, 113, p. 103779. Elsevier Science 10.1016/j.jdent.2021.103779

Abou-Ayash, Samir; Schimmel, Martin; Özcan, Mutlu; Oczelik, Burak; Brägger, Urs; Yilmaz, Burak (2021). Trueness and marginal fit of implant-supported complete-arch fixed prosthesis frameworks made of high-performance polymers and titanium: An explorative in-vitro study. Journal of dentistry, 113, p. 103784. Elsevier Science 10.1016/j.jdent.2021.103784

Enkling, Norbert; Nauli, Joël; Kraus, Dominik; Wittneben, Julia Gabriela; Schimmel, Martin; Abou-Ayash, Samir (2021). Short strategic implants for mandibular removable partial dentures: One-year results from a pilot randomized crossover abutment type study. Clinical oral implants research, 32(10), pp. 1176-1189. Wiley-Blackwell 10.1111/clr.13815

Cakmak, Gülce; Donmez, Mustafa Borga; Atalay, Sevda; Yilmaz, Hakan; Kökat, Ali Murat; Yilmaz, Burak (2021). Accuracy of single implant scans with a combined healing abutment-scan body system and different intraoral scanners: AAn in vitro study. Journal of dentistry, 113, p. 103773. Elsevier Science 10.1016/j.jdent.2021.103773

Srinivasan, Murali; Kamnoedboon, Porawit; McKenna, Gerald; Angst, Lea; Schimmel, Martin; Özcan, Mutlu; Müller, Frauke (2021). CAD-CAM removable complete dentures: A systematic review and meta-analysis of trueness of fit, biocompatibility, mechanical properties, surface characteristics, color stability, time-cost analysis, clinical and patient-reported outcomes. Journal of dentistry, 113, p. 103777. Elsevier Science 10.1016/j.jdent.2021.103777

Wolf, Thomas Gerhard; Anderegg, Andrea Lisa; Yilmaz, Burak; Campus, Guglielmo Giuseppe (2021). Root Canal Morphology and Configuration of the Mandibular Canine: A Systematic Review. International journal of environmental research and public health, 18(19) MDPI 10.3390/ijerph181910197

McKenna, Gerry; Srinivasan, Murali; Leles, Claudio; Schimmel, Martin (2021). The Oral Health of the Ageing Population. In: McKenna, Gerry (ed.) Nutrition and Oral Health (pp. 29-38). Cham: Springer 10.1007/978-3-030-80526-5_4

Lam, Walter Yu-Hang; Mak, Ken Chung-Kan; Maghami, Ebrahim; Molinero-Mourelle, Pedro (2021). Dental students' preference and perception on intraoral scanning and impression making. BMC medical education, 21(1), p. 501. BioMed Central 10.1186/s12909-021-02894-3

Hasanzade, Mahya; Aminikhah, Mahdi; Afrashtehfar, Kelvin I.; Alikhasi, Marzieh (2021). Marginal and internal adaptation of single crowns and fixed dental prostheses by using digital and conventional workflows: A systematic review and meta-analysis. The journal of prosthetic dentistry, 126(3), pp. 360-368. Elsevier 10.1016/j.prosdent.2020.07.007

Atalay, Sevda; Cakmak, Gülce; Fonseca, Manrique; Schimmel, Martin; Yilmaz, Burak (2021). Effect of thermocycling on the surface properties of CAD-CAM denture base materials after different surface treatments. Journal of the mechanical behavior of biomedical materials, 121, p. 104646. Elsevier 10.1016/j.jmbbm.2021.104646

Freudenberg, Florian; Candemir, Esin; Chen, Xufeng; Li, Li-Li; Esen-Sehir, Dilhan; Schenk, Nicole; Kinoshita, Makoto; Grünewald, Lena; Frerichs, Veronika; Fattakhov, Nikolai; Manchen, Jessica; Bikas, Solmaz; Kumar, Anita; OLeary, Aet; Slattery, David A; von Engelhardt, Jakob; Courtney, Michael J; Reif, Andreas (2021). Hippocampal overexpression of NOS1AP promotes endophenotypes related to mental disorders. EBioMedicine, 71, p. 103565. Elsevier 10.1016/j.ebiom.2021.103565

Mathey, Ayse; Brägger, Urs; Joda, Tim (2021). Trueness and Precision Achieved With Conventional and Digital Implant Impressions: A Comparative Investigation of Stone Versus 3-D Printed Master Casts. European journal of prosthodontics and restorative dentistry EJPRD, 29(3) Barber 10.1922/EJPRD_2114Mathey08

Ozan, Oguz; Pekperdahci, Tolga; Kocyigit, Doruk; Yilmaz, Burak (2021). A Technique to Fabricate an Interim Implant-Supported Fixed Complete Denture for Immediate Loading. The journal of oral implantology, 47(4), pp. 318-323. American Association of Implant Dentistry 10.1563/aaid-joi-D-19-00374

Ebeid, Kamal; Sabet, Ahmed; Rafla, Nancy; Al-Haj Husain, Nadin; Özcan, Mutlu (2021). Effect of photo-polymerization mode on the degree of conversion of resin cement under different ceramic materials. Minerva stomatologica, 70(4), pp. 147-154. Minerva Medica 10.23736/S0026-4970.20.04354-X

Schimmel, Martin; Janner, Simone; Joda, Tim; Wittneben, Julia; McKenna, Gerald; Brägger, Urs (2021). Mandibular implant-supported fixed complete dental prostheses on implants with ultrashort and standard length: A pilot treatment. The journal of prosthetic dentistry, 126(2), pp. 137-143. Elsevier 10.1016/j.prosdent.2020.04.013

Batak, Burcu; Çakmak, Gülce; Johnston, William M.; Yilmaz, Burak (2021). Surface roughness of high-performance polymers used for fixed implant-supported prostheses. The journal of prosthetic dentistry, 126(2), 254.e1-254.e6. Elsevier 10.1016/j.prosdent.2020.11.029

Raabe, Clemens; Monje, Alberto; Abou-Ayash, Samir; Buser, Daniel Albin; von Arx, Thomas; Chappuis, Vivianne (2021). Long-term effectiveness of 6 mm micro-rough implants in various indications: A 4.6- to 18.2-year retrospective study. Clinical oral implants research, 32(8), pp. 1008-1018. Wiley-Blackwell 10.1111/clr.13795

Schimmel, Martin; Leuchter, Igor; Héritier Barras, Anne-Chantal; Leles, Claudio R; Abou-Ayash, Samir; Viatte, Valérie; Esteve, Françoise; Janssens, Jean-Paul; Mueller, Frauke; Genton, Laurence (2021). Oral function in amyotrophic lateral sclerosis patients: A matched case-control study. Clinical nutrition, 40(8), pp. 4904-4911. Elsevier 10.1016/j.clnu.2021.06.022

Yilmaz, Burak; Gouveia, Diogo; Rizzo Marques, Vinicius; Diker, Emre; Schimmel, Martin; Abou-Ayash, Samir (2021). The accuracy of single implant scans with a healing abutment-scanpeg system compared with the scans of a scanbody and conventional impressions: An in vitro study. Journal of dentistry, 110, p. 103684. Elsevier Science 10.1016/j.jdent.2021.103684

Fonseca, Manrique; Molinero-Mourelle, Pedro; Forrer, Fiona Alena; Schnider, Nicole; Hicklin, Stefan Paul; Schimmel, Martin; Brägger, Urs (2021). Clinical performance of implant crowns with customized zirconia abutments: A prospective cohort study with a 4.5‐ to 8.8‐year follow‐up. Clinical oral implants research, 32(7), pp. 853-862. Wiley-Blackwell 10.1111/clr.13761

Yilmaz, Burak; Batak, Burcu; Seghi, Robert; Johnston, William M; Lang, Lisa A (2021). Effect of Crown Height on the Screw Stability of Titanium Screw-Retained Crowns. Journal of prosthodontics, 30(6), pp. 515-519. Wiley 10.1111/jopr.13352

Schönhoff, Lisa Marie; Lümkemann, Nina; Buser, Ramona; Hampe, Rüdiger; Stawarczyk, Bogna (2021). Fatigue resistance of monolithic strength-gradient zirconia materials. Journal of the mechanical behavior of biomedical materials, 119, p. 104504. Elsevier 10.1016/j.jmbbm.2021.104504

Afrashtehfar, Kelvin Ian; Bryant, Stephen Ross (2021). Understanding the Lived Experience of North American Dental Patients With a Single-Tooth Implant in the Upper Front Region of the Mouth: Protocol for a Qualitative Study. JMIR research protocols, 10(6), e25767. JMIR Publications 10.2196/25767

Bekes, Katrin; John, Mike T; Rener-Sitar, Ksenija; Al-Harthy, Mohammad H; Michelotti, Ambra; Reissmann, Daniel R; Nikolovska, Julijana; Sanivarapu, Sahityaveera; Lawal, Folake B; List, Thomas; Peršić Kiršić, Sanja; Strajnić, Ljiljana; Casassus, Rodrigo; Baba, Kazuyoshi; Schimmel, Martin; Amuasi, Ama; Jayasinghe, Ruwan D; Strujić-Porović, Sanela; Peck, Christopher C; Xie, Han; ... (2021). Pediatric patients' reasons for visiting dentists in all WHO regions. Health and quality of life outcomes, 19(1), p. 165. BioMed Central 10.1186/s12955-021-01801-0

Helm, Alexandra; Martín-Vacas, Andrea; Molinero-Mourelle, Pedro; Caleya, Antonia M; Gallardo, Nuria E; Mourelle-Martínez, María Rosa (2021). Ectopic Eruption of Maxillary First Permanent Molars: Preliminary Results of Prevalence and Dentoskeletal Characteristics in Spanish Paediatric Population. Children, 8(6) MDPI 10.3390/children8060479

Afrashtehfar, Kelvin Ian; Saeed, Musab H (2021). Comments about the appraisal of systematic reviews in restorative dentistry. F1000Research, 10(442), p. 442. F1000 Research Ltd 10.12688/f1000research.53117.3

Afrashtehfar, Kelvin I.; Katsoulis, Joannis; Koka, Sreenivas; Igarashi, Kensuke (2021). Single versus splinted short implants at sinus augmented sites: A systematic review and meta-analysis. Journal of stomatology, oral and maxillofacial surgery, 122(3), pp. 303-310. Elsevier 10.1016/j.jormas.2020.08.013

Yilmaz, Burak; Rizzo Marques, Vinicius; Guo, Xiaohan; Gouveia, Diogo; Abou-Ayash, Samir (2021). The effect of scanned area on the accuracy and time of anterior single implant scans: an in vitro study. Journal of dentistry, 109, p. 103620. Elsevier Science 10.1016/j.jdent.2021.103620

Durkan, Rukiye; Şimşek, Hatice; Deste Gökay, Gonca; Yilmaz, Burak (2021). Effects of sintering time on translucency and color of translucent zirconia ceramics. Journal of esthetic and restorative dentistry, 33(4), pp. 654-659. Wiley-Blackwell 10.1111/jerd.12723

Sasany, Rafat; Ergun-Kunt, Goknil; Yilmaz, Burak (2021). Effect of mouth rinses on optical properties of CAD-CAM materials used for laminate veneers and crowns. Journal of esthetic and restorative dentistry, 33(4), pp. 648-653. Wiley-Blackwell 10.1111/jerd.12720

Yilmaz, Burak; Cakmak, Gülce; Batak, Burcu; Johnston, William M (2021). Screw stability of CAD-CAM titanium and zirconia abutments on different implants: An in vitro study. Clinical implant dentistry and related research, 23(3), pp. 373-379. Wiley 10.1111/cid.13001

Pérez-González, F.; Sánchez-Labrador, L.; Molinero-Mourelle, Pedro; Sáez-Alcaide, L.M.; Cortés-Bretón-Brinkmann, J.; Torres García-Denche, J.; López-Quiles, J.; Martinez-González, J.M. (2021). Re: Dental implant placement through impacted teeth or residual roots as an alternative to invasive extraction surgeries: a systematic literature review. British journal of oral & maxillofacial surgery, 59(5), pp. 616-617. Elsevier 10.1016/j.bjoms.2021.02.022

Sánchez-Labrador, Luis; Molinero-Mourelle, Pedro; Pérez-González, Fabián; Saez-Alcaide, Luis Miguel; Brinkmann, Jorge Cortés-Bretón; Martínez, Juan López-Quiles; Martínez-González, Jose María (2021). Clinical performance of alveolar ridge augmentation with xenogeneic bone block grafts versus autogenous bone block grafts. A systematic review. Journal of stomatology, oral and maxillofacial surgery, 122(3), pp. 293-302. Elsevier 10.1016/j.jormas.2020.10.009

Stalder, Anja (2021). Neue Erkenntnisse zum Design von wurzelstiftverankerten Hybridprothesen. Dental tribune - Swiss Edition Oemus Media AG

Raabe, Clemens; Janner, Simone F. M.; Abou Ayash, Samir (2021). [Comprehensive Digital Workflow and Computer-Assisted Implant Surgery in a Patient with Reduced Crest Width. Case Report of a Split-Mouth Approach]. Swiss dental journal, 131(5), pp. 437-441. Schweizerische Zahnärzte-Gesellschaft SSO

Revilla-León, Marta; Al-Haj Husain, Nadin; Methani, Mohammed Mujtaba; Özcan, Mutlu (2021). Chemical composition, surface roughness, and ceramic bond strength of additively manufactured cobalt-chromium dental alloys. The journal of prosthetic dentistry, 125(5), pp. 825-831. Elsevier 10.1016/j.prosdent.2020.03.012

Çakmak, Gülce; Subaşı, Meryem Gülce; Yilmaz, Burak (2021). Effect of thermocycling on the surface properties of resin-matrix CAD-CAM ceramics after different surface treatments. Journal of the mechanical behavior of biomedical materials, 117, p. 104401. Elsevier 10.1016/j.jmbbm.2021.104401

Molinero-Mourelle, Pedro; Cascos-Sanchez, Rocio; Yilmaz, Burak; Lam, Walter Yu Hang; Pow, Edmond Ho Nang; Del Río Highsmith, Jaime; Gómez-Polo, Miguel (2021). Effect of Fabrication Technique on the Microgap of CAD/CAM Cobalt-Chrome and Zirconia Abutments on a Conical Connection Implant: An In Vitro Study. Materials, 14(9) Molecular Diversity Preservation International MDPI 10.3390/ma14092348

Revilla-León, Marta; Al-Haj Husain, Nadin; Ceballos, Laura; Özcan, Mutlu (2021). Flexural strength and Weibull characteristics of stereolithography additive manufactured versus milled zirconia. The journal of prosthetic dentistry, 125(4), pp. 685-690. Elsevier 10.1016/j.prosdent.2020.01.019

Schimmel, Martin; Akino, Norio; Srinivasan, Murali; Wittneben, Julia-Gabriela; Yilmaz, Burak; Abou-Ayash, Samir (2021). Accuracy of intraoral scanning in completely and partially edentulous maxillary and mandibular jaws: an in vitro analysis. Clinical oral investigations, 25(4), pp. 1839-1847. Springer-Verlag 10.1007/s00784-020-03486-z

Arakawa, Itsuka; Igarashi, Kensuke; Imamura, Yoshiki; Müller, Frauke; Abou-Ayash, Samir; Schimmel, Martin (2021). Variability in tongue pressure among elderly and young healthy cohorts: A systematic review and meta-analysis. Journal of oral rehabilitation, 48(4), pp. 430-448. Blackwell Scientific Publications 10.1111/joor.13076

Stalder, Anja; Berger, Camille Henriette; Buser, Ramona; Wittneben, Julia; Schimmel, Martin; Abou-Ayash, Samir (2021). Biological and technical complications in root cap-retained overdentures after 3-15 years in situ: a retrospective clinical study. Clinical oral investigations, 25(4), pp. 2325-2333. Springer-Verlag 10.1007/s00784-020-03555-3

Charadram, Nattida; Maniewicz, Sabrina; Maggi, Stefania; Petrovic, Mirko; Kossioni, Anastassia; Srinivasan, Murali; Schimmel, Martin; Mojon, Philippe; Müller, Frauke (2021). Development of a European consensus from dentists, dental hygienists and physicians on a standard for oral health care in care-dependent older people: An e-Delphi study. Gerodontology, 38(1), pp. 41-56. Wiley-Blackwell 10.1111/ger.12501

MacEntee, Michael I; Brondani, Mario; Avivi-Arber, Limor; Bartlett, David; Donnelly, Leeann; Duyck, Joke; Hori, Kazuhiro; Karve, Avanti; Persson, G Rutger; Kettratad-Pruksapong, Matana; Schimmel, Martin; Hon-Ching So, Frankie; Thomson, W Murray; Yoon, Minn N; Wyatt, Chris (2021). Clinical Oral Disorders in Adults Screening Protocol (CODA-SP) from the 2019 Vancouver IADR Consensus Symposium. Gerodontology, 38(1), pp. 5-16. Wiley-Blackwell 10.1111/ger.12496

de Resende, Gabriela Pereira; Jordão, Lídia Moraes Ribeiro; de Souza, João Antônio Chaves; Schimmel, Martin; Leles, Cláudio Rodrigues (2021). Single versus two-implant mandibular overdentures using early-loaded titanium-zirconium implants with hydrophilic surface and ball attachments: 1-year randomized clinical trial. Clinical oral implants research, 32(3), pp. 359-368. Wiley 10.1111/clr.13707

Passia, Nicole; Schimmel, Martin (2021). Neue Retentionselemente für implantatgetragene Deckprothesen. Quintessenz Zahnmedizin, 72(3), pp. 268-274. Quintessenz Verlag

Al-Haj Husain, Nadin; Molinero-Mourelle, Pedro; Janner, Simone F. M.; Brägger, Urs; Özcan, Mutlu; Schimmel, Martin; Revilla-Léon, Marta; Abou-Ayash, Samir (2021). Digital workflow for implant-supported fixed complete dentures based on backwards planning in an edentulous patient. International journal of computerized dentistry, 24(1), pp. 89-101. Quintessence Publishing

Al-Haj Husain, Nadin; Walther, Lorenz; Özcan, Mutlu; Brägger, Urs; Joda, Tim (2021). Effect of Thickness and Shade of Resin and Ceramic- Based Hybrid Materials on Color Masking Abilities and Optical Performance of CAD/CAM Materials. European journal of prosthodontics and restorative dentistry, 29(1), pp. 14-21. Dennis Barber 10.1922/EJPRD_2058Al-HajHusain08

Ballal, Vasudev; Khandelwal, Deepika; Yegneswaran, Prakash Peralam; Varghese, Jothi; Al-Haj Husain, Nadin; Özcan, Mutlu (2021). Evaluation of Smear Layer Removal and Antimicrobial Efficacy of HybenX Against Enterococcus Faecalis Biofilm. European journal of prosthodontics and restorative dentistry, 29(1), pp. 6-13. Dennis Barber 10.1922/EJPRD_2054Ballal08

Dhesi, G S; Sidhu, S; Al-Haj Husain, Nadin; Özcan, M (2021). Evaluation of Adhesion Protocol for Titanium Base Abutments to Different Ceramic and Hybrid Materials. European journal of prosthodontics and restorative dentistry EJPRD, 29(1), pp. 22-34. Hancocks 10.1922/EJPRD_2073Dhesi13

Hernández, Emilia López; Alvarez, Alberto; Abou-Ayash, Samir; Att, Wael (2021). Effect of Complete Dentures on Facial Soft Tissue Volume: A 3D Comparative Study. The international journal of prosthodontics, 35(2), 208–218. Quintessence Publishing 10.11607/ijp.7057

Batak, Burcu; Cakmak, Gülce; Seidt, Jeremy; Yilmaz, Burak (2021). Load to failure of high-density polymers for implant-supported fixed, cantilevered prostheses with titanium bases. The international journal of prosthodontics, 34(5), 608–614. Quintessence Publishing 10.11607/ijp.7036

Afrashtehfar, Kelvin I.; Assery, Mansour K A; Bryant, S Ross (2021). Aesthetic Parameters and Patient-Perspective Assessment Tools for Maxillary Anterior Single Implants. International journal of dentistry, 2021(6684028), p. 6684028. 10.1155/2021/6684028

Fiore, Adolfo Di; Monaco, Carlo; Brunello, Giulia; Granata, Stefano; Stellini, Edoardo; Yilmaz, Burak (2021). Automatic Digital Design of the Occlusal Anatomy of Monolithic Zirconia Crowns Compared to Dental Technicians' Digital Waxing: A Controlled Clinical Trial. Journal of prosthodontics - implant, esthetic, and reconstructive dentistry, 30(2), pp. 104-110. Blackwell 10.1111/jopr.13268

Carellis, Clio; Kalberer, Nicole; Abou-Ayash, Samir; Schimmel, Martin; Wittneben, Julia G; Zitzmann, Nicola U; Besimo, Christian E; Bornstein, Michael M; Müller, Frauke; Srinivasan, Murali (2021). Attitudes of dental students towards treating elderly patients. Dental students’ attitudes on geriatric patients (In Press). Swiss dental journal, 131(2) Schweizerische Zahnärzte-Gesellschaft SSO

Folwaczny, Matthias; Rudolf, Torsten; Frasheri, Iris; Betthäuser, Madlena (2021). Ultrastructural changes of smooth and rough titanium implant surfaces induced by metal and plastic periodontal probes. Clinical oral investigations, 25(1), pp. 105-114. Springer-Verlag 10.1007/s00784-020-03341-1

Tuna, Taskin; Yilmaz, Burak; Hermanns-Sachweh, Benita; Raith, Stefan; Wolfart, Stefan (2021). From a CAD/CAM-milled, allogeneic bone block to an implant-supported fixed partial denture with angulated screw channel: a case report. Quintessence international, 52(1), pp. 56-63. Quintessenz Verlags-GmbH 10.3290/j.qi.a45431

Kürkçüoğlu, Işın; Küçükeşmen, Hakkı Cenker; Ozkir, Serhat Emre; Yilmaz, Burak (2021). Effect of surface treatment on roughness and bond strength of CAD‐CAM multidirectional glass fiber‐reinforced composite resin used for implant‐supported prostheses. Polymer international, 70(8), pp. 1153-1158. Wiley 10.1002/pi.6173

Mesquita, Alfredo Mikail Melo; Al-Haj Husain, Nadin; Molinero-Mourelle, Pedro; Özcan, Mutlu (2021). An Intraoral Repair Method for Chipping Fracture of a Multi-unit Fixed Zirconia Reconstruction: A Direct Dental Technique. European journal of dentistry, 15(1), pp. 174-178. Thieme 10.1055/s-0040-1716311

Azevedo, Luís; Correia, André; Almeida, Carlos F.; Molinero-Mourelle, Pedro; Correia, Maria; Del Río Highsmith, Jaime (2021). Biocompatibility and Effectiveness of a Novel, Organic Olive Oil-Based Denture Adhesive: A Multicenter Randomized and Placebo-Controlled Clinical Trial. International journal of environmental research and public health, 18(7) MDPI 10.3390/ijerph18073398

Tanveer, Waqas; Ridwan-Pramana, Angela; Molinero-Mourelle, Pedro; Koolstra, Jan Harm; Forouzanfar, Tymour (2021). Systematic Review of Clinical Applications of CAD/CAM Technology for Craniofacial Implants Placement and Manufacturing of Nasal Prostheses. International journal of environmental research and public health, 18(7) MDPI 10.3390/ijerph18073756

Sánchez-Labrador, Luis; Molinero-Mourelle, Pedro; Cortés-Bretón Brinkmann, Jorge; Prados-Frutos, Juan Carlos; Gómez-Polo, Miguel; Martínez-González, José María (2021). Clinical Behavior and Complications of Mandibular Full-Arch Fixed Dental Prostheses Supported by Three Dental Implants. A Systematic Review and Meta-Analysis. Biology, 10(4) MDPI 10.3390/biology10040308

Gonçalves, Thais Marques Simek Vega; Schimmel, Martin; van der Bilt, Andries; Chen, Jianshe; van der Glas, Hilbert W.; Kohyama, Kaoru; Hennequin, Martine; Peyron, Marie‐Agnès; Woda, Alain; Leles, Claudio Rodrigues; Pereira, Luciano (2021). Consensus on the terminologies and methodologies for masticatory assessment. Journal of oral rehabilitation, 48(6), pp. 745-761. Wiley 10.1111/joor.13161

Molinero-Mourelle, Pedro; Al-Haj Husain, Nadin; Abou-Ayash, Samir; Yilmaz, Burak; Iizuka, Tateyuki; Schimmel, Martin (2021). Single-visit chairside adjustment of a metal-acrylic resin implant-supported fixed complete dental prosthesis on an unloaded implant using a novel fixed attachment system: a case report. Journal of medical case reports, 15(1), p. 236. BioMed Central 10.1186/s13256-021-02854-x

Roccuzzo, Andrea; Molinero-Mourelle, Pedro; Ferrillo, Martina; Cobo-Vázquez, Carlos; Sanchez-Labrador, Luis; Ammendolia, Antonio; Migliario, Mario; de Sire, Alessandro (2021). Type I Collagen-Based Devices to Treat Nerve Injuries after Oral Surgery Procedures. A Systematic Review. Applied Sciences, 11(9), p. 3927. MDPI 10.3390/app11093927

Katagiri, Hiroki; Stuck, Neil-Jérôme; Arakawa, Itsuka; Nietzsche, Sandor; Eick, Sigrun (2021). In vitro Activity of Oral Health Care Products on Candida Biofilm Formation. Monographs in oral science, 29, pp. 214-226. Karger 10.1159/000510194

Gintaute, Aiste; Weber, Karin; Zitzmann, Nicola U.; Brägger, Urs; Ferrari, Marco; Joda, Tim (2021). A Double-Blind Crossover RCT Analyzing Technical and Clinical Performance of Monolithic ZrO2 Implant Fixed Dental Prostheses (iFDP) in Three Different Digital Workflows. Journal of clinical medicine, 10(12), p. 2661. MDPI 10.3390/jcm10122661

Mathey, Ayse; Schimmel, Martin; Suter, Valérie G. A. (2021). Behandlung der Prothesenstomatitis. Quintessenz Zahnmedizin, 72(1), pp. 66-74. Quintessenz Verlag

Ramseier, Christoph A.; Fischer, Jean R.; Fischer, Gino; Schimmel, Martin (2021). Effect of Age on Bleeding on Probing (BOP) as an Indicator of Periodontal Inflammation in Patients Enrolled in Supportive Periodontal Therapy. Oral health & preventive dentistry, 19(1), pp. 43-50. Quintessenz Verlags-GmbH 10.3290/j.ohpd.b898947

Schimmel, Martin; Müller, Frauke; Suter, Valérie G. A.; Buser, Daniel; Abou-Ayash, Samir; Murali, Srinivasan (2021). Implantatprothetische Versorgung älterer zahnloser Patienten. Implantologie, 79(1), pp. 7-23. Quintessenz Verlags-GmbH

Zonnenberg, Adrianus J. J.; Türp, Jens Christoph; Greene, Charles S. (2021). Centric relation critically revisited—What are the clinical implications? Journal of Oral Rehabilitation, 48(9), pp. 1050-1055. 10.1111/joor.13215

Cakmak, Gülce; Cuellar, Alfonso Rodriguez; Donmez, Mustafa Borga; Schimmel, Martin; Abou-Ayash, Samir; Lu, Wei-En; Yilmaz, Burak (2021). Effect of Printing Layer Thickness on the Trueness and Margin Quality of 3D-Printed Interim Dental Crowns. Applied Sciences, 11(19), p. 9246. MDPI 10.3390/app11199246

Jiang, Chloe Meng; Chu, Chun Hung; Duangthip, Duangporn; Ettinger, Ronald L.; Hugo, Fernando Neves; Kettratad-Pruksapong, Matana; Liu, Jian; Marchini, Leonardo; McKenna, Gerry; Ono, Takahiro; Rong, Wensheng; Schimmel, Martin; Shah, Naseem; Slack-Smith, Linda; Yang, Stella X.; Lo, Edward C. M. (2021). Global Perspectives of Oral Health Policies and Oral Healthcare Schemes for Older Adult Populations. Frontiers in oral health, 2 Frontiers Media 10.3389/froh.2021.703526

Shokeen, Bhumika; Zamani, Leila; Zadmehr, Sara; Pouraghaie, Sevda; Ozawa, Ryotaro; Yilmaz, Burak; Lilak, Sam; Sharma, Shivani; Ogawa, Takahiro; Moshaverinia, Alireza; Lux, Renate (2021). Surface Characterization and Assessment of Biofilm Formation on Two Titanium-Based Implant Coating Materials. Frontiers in dental medicine, 2 Frontiers 10.3389/fdmed.2021.695417

2020

Sáez-Alcaide, Luis Miguel; Brinkmann, Jorge Cortés-Bretón; Sánchez-Labrador, Luis; Pérez-González, Fabián; Molinero Mourelle, Pedro; López-Quiles, Juan (2020). Effectiveness of the bone ring technique and simultaneous implant placement for vertical ridge augmentation: a systematic review. International journal of implant dentistry, 6(1), p. 82. Springer 10.1186/s40729-020-00280-0

Bhalang, Kanokporn; Steiger, Beat; Lukic, Nenad; Zumbrunn Wojczyńska, Aleksandra; Hovijitra, Ray S.; Ettlin, Dominik A. (2020). The Pain–to–Well-Being Relationship in Patients Experiencing Chronic Orofacial Pain. Frontiers in neurology, 11(557415), p. 557415. Frontiers Media S.A. 10.3389/fneur.2020.557415

Srinivasan, Murali; Schimmel, Martin; Buser, Ramona; Maniewicz, Sabrina; Herrmann, François R; Müller, Frauke (2020). Mandibular two-implant overdentures with CAD-CAM milled bars with distal extensions or retentive anchors: a randomized controlled trial. Clinical oral implants research, 31(12), pp. 1207-1222. Wiley-Blackwell 10.1111/clr.13668

Çakmak, Gülce; Yilmaz, Hakan; Aydoğ, Özge; Yilmaz, Burak (2020). Flexural strength of CAD-CAM and conventional interim resin materials with a surface sealant. The journal of prosthetic dentistry, 124(6), 800.e1-800.e7. Elsevier 10.1016/j.prosdent.2020.09.004

Fankhauser, Nicolas; Kalberer, Nicole; Müller, Frauke; Leles, Claudio R; Schimmel, Martin; Srinivasan, Murali (2020). Comparison of smartphone-camera and conventional flatbed scanner images for analytical evaluation of chewing function. Journal of oral rehabilitation, 47(12), pp. 1496-1502. Wiley 10.1111/joor.13094

Rutkunas, V; Gedrimiene, A; Adaskevicius, R; Al-Haj Husain, N.; Özcan, M (2020). Comparison of the Clinical Accuracy of Digital and Conventional Dental Implant Impressions. European journal of prosthodontics and restorative dentistry EJPRD, 28(4), pp. 173-181. Hancocks 10.1922/EJPRD_02028Rutkunas09

Chebib, Najla; Abou-Ayash, Samir; Maniewicz, Sabrina; Srinivasan, Murali; Hill, Harry; McKenna, Gerald; Holmes, Emily; Schimmel, Martin; Brocklehurst, Paul; Müller, Frauke (2020). Exploring Older Swiss People's Preferred Dental Services for When They Become Dependent. Swiss dental journal, 130(11), pp. 876-884. Schweizerische Zahnärzte-Gesellschaft SSO

Forrer, Fiona Alena; Schnider, Nicole; Brägger, Urs; Yilmaz, Burak; Hicklin, Stefan Paul (2020). Clinical performance and patient satisfaction obtained with tooth-supported ceramic crowns and fixed partial dentures. The journal of prosthetic dentistry, 124(4), pp. 446-453. Elsevier 10.1016/j.prosdent.2019.08.012

Hartmann, Roberto; Bandeira, Ana Clara Freitas de Menezes; Araújo, Sara Cristina de; Brägger, Urs; Schimmel, Martin; Leles, Cláudio Rodrigues (2020). A parallel 3-group randomised clinical trial comparing different implant treatment options for the edentulous mandible: 1-year effects on dental patient-reported outcomes and chewing function. Journal of oral rehabilitation, 47(10), pp. 1264-1277. Blackwell Scientific Publications 10.1111/joor.13070

Varghese, Jothi; Bhat, Vinutha; Chianeh, Yousef Rezaei; Kamath, V; Al-Haj Husain, Nadin; Özcan, Mutlu (2020). Salivary 8-hydroxyguanosine levels in smokers and non-smokers with chronic periodontitis. Odontology, 108(4), pp. 569-577. Springer Japan 10.1007/s10266-020-00496-x

Berger, Camille Henriette; Arnold, Caroline; Stalder, Anja Katrin; Weber, Adrian; Abou-Ayash, Samir; Schimmel, Martin (2020). Root-retained overdentures: Survival of abutment teeth with precision attachments on root caps depends on overdenture design. Journal of oral rehabilitation, 47(10), pp. 1254-1263. Blackwell Scientific Publications 10.1111/joor.13060

Abou-Ayash, Samir; Schimmel, Martin; Kraus, Dominik; Mericske-Stern, Regina; Albrecht, Dominic; Enkling, Norbert (2020). Platform switching in two-implant bar-retained mandibular overdentures: 1-year results from a split-mouth randomized controlled clinical trial. Clinical oral implants research, 31(10), pp. 968-979. Wiley-Blackwell 10.1111/clr.13640

Lümkemann, Nina; Schönhoff, Lisa Marie; Buser, Ramona; Stawarczyk, Bogna (2020). Effect of Cleaning Protocol on Bond Strength between Resin Composite Cement and Three Different CAD/CAM Materials. Materials, 13(18) Molecular Diversity Preservation International MDPI 10.3390/ma13184150

Ioannidis, Alexis; Borgis, Serge; Grütter, Linda; Katsoulis, Joannis; Ruggia, Fidel; Sailer, Irena; Tinner, Daniel; Zitzmann, Nicola; Jung, Ronald (2020). Antibiotics in reconstructive dentistry. Swiss dental journal, 130(9), pp. 707-709. Schweizerische Zahnärzte-Gesellschaft SSO

Jünger, Hendrik; Jaun-Ventrice, Anna; Guldener, Kevin; Ramseier, Christoph A.; Reissmann, Daniel R; Schimmel, Martin; Jünger, Hendrik (2020). Anti-inflammatory potential of an essential oil-containing mouthwash in elderly subjects enrolled in supportive periodontal therapy: a 6-week randomised controlled clinical trial. Clinical oral investigations, 24(9), pp. 3203-3211. Springer-Verlag 10.1007/s00784-019-03194-3

John, Mike T; Sekulić, Stella; Bekes, Katrin; Al-Harthy, Mohammad H; Michelotti, Ambra; Reissmann, Daniel R; Nikolovska, Julijana; Sanivarapu, Sahityaveera; Lawal, Folake B; List, Thomas; Peršić Kiršić, Sanja; Strajnić, Ljiljana; Casassus, Rodrigo; Baba, Kazuyoshi; Schimmel, Martin; Amuasi, Ama; Jayasinghe, Ruwan D; Strujić-Porović, Sanela; Peck, Christopher C; Xie, Han; ... (2020). Why Patients Visit Dentists - A Study in all World Health Organization Regions. The journal of evidence-based dental practice, 20(3), p. 101459. Elsevier 10.1016/j.jebdp.2020.101459

Srinivasan, Murali; Schimmel, Martin; Leles, Claudio; McKenna, Gerry (2020). Managing Edentate Older Adults. Primary dental journal, 9(3), pp. 29-33. 10.1177/2050168420943410

Lamprecht, Ragna; Guse, Jennifer; Schimmel, Martin; Müller, Frauke; Heydecke, Guido; Reissmann, Daniel R (2020). Benefits of combined quantitative and qualitative evaluation of learning experience in a gerodontology course for dental students. BMC medical education, 20(1), p. 281. BioMed Central 10.1186/s12909-020-02196-0

Hartmann, Roberto; de Menezes Bandeira, Ana Clara Freitas; de Araújo, Sara Cristina; McKenna, Gerald; Brägger, Urs; Schimmel, Martin; Leles, Cláudio Rodrigues (2020). Cost‐effectiveness of three different concepts for the rehabilitation of edentulous mandibles: overdentures with 1 or 2 implant attachments and hybrid prosthesis on four implants. Journal of oral rehabilitation, 47(11), pp. 1394-1402. Blackwell Scientific Publications 10.1111/joor.13071

El Kholy, Karim; Buser, Daniel; Wittneben, Julia; Bosshardt, Dieter D.; Van Dyke, Thomas E.; Kowolik, Michael J. (2020). Investigating the Response of Human Neutrophils to Hydrophilic and Hydrophobic Micro-Rough Titanium Surfaces. Materials, 13(15) Molecular Diversity Preservation International MDPI 10.3390/ma13153421

Yue, Qin; Yilmaz, Burak; Abou-Ayash, Samir; Zimmermann, Patrick; Brägger, Urs; Schimmel, Martin (2020). Use of an attachment system with angulated abutments and polyetheretherketone inserts to retain a maxillary overdenture: A clinical report. The journal of prosthetic dentistry, 124(2), pp. 129-134. Elsevier 10.1016/j.prosdent.2019.07.013

Al-Haj Husain, Nadin; Özcan, Mutlu; Molinero-Mourelle, Pedro; Joda, Tim (2020). Clinical Performance of Partial and Full-Coverage Fixed Dental Restorations Fabricated from Hybrid Polymer and Ceramic CAD/CAM Materials: A Systematic Review and Meta-Analysis. Journal of clinical medicine, 9(7) MDPI 10.3390/jcm9072107

Scherrer, Daniela; Brägger, Urs; Ferrari, Marco; Mocker, André; Joda, Tim (2020). In-vitro polishing of CAD/CAM ceramic restorations: An evaluation with SEM and confocal profilometry. Journal of the mechanical behavior of biomedical materials, 107(103761), p. 103761. Elsevier 10.1016/j.jmbbm.2020.103761

Arakawa, Itsuka; Abou-Ayash, Samir; Genton, Laurence; Tsuga, Kazuhiro; Leles, Cláudio Rodrigues; Schimmel, Martin (2020). Reliability and comparability of methods for assessing oral function: Chewing, tongue pressure and lip force. Journal of oral rehabilitation, 47(7), pp. 862-871. Wiley 10.1111/joor.12976

Enkling, Norbert; Moazzin, Rim; Geers, Gregor; Kokoschka, Stephanie; Abou-Ayash, Samir; Schimmel, Martin (2020). Clinical outcomes and bone-level alterations around one-piece mini dental implants retaining mandibular overdentures: 5-year follow-up of a prospective cohort study. Clinical oral implants research, 31(6), pp. 549-556. Wiley-Blackwell 10.1111/clr.13591

Yilmaz, Burak; Alsaery, Amani; Altintas, Subutay H; Schimmel, Martin (2020). Comparison of strains for new generation CAD-CAM implant-supported crowns under loading. Clinical implant dentistry and related research, 22(3), pp. 397-402. Wiley 10.1111/cid.12894

Wolf, Thomas Gerhard; Kozaczek, Christoph; Siegrist, Mark; Betthäuser, Madlena; Paqué, Frank; Briseño-Marroquín, Benjamín (2020). An Ex Vivo Study of Root Canal System Configuration and Morphology of 115 Maxillary First Premolars. Journal of endodontics, 46(6), pp. 794-800. Elsevier 10.1016/j.joen.2020.03.001

Al-Haj Husain, Nadin; Özcan, Mutlu; Schimmel, Martin; Abou-Ayash, Samir (2020). A digital cast-free clinical workflow for oral rehabilitation with removable partial dentures: A dental technique. The journal of prosthetic dentistry, 123(5), pp. 680-685. Elsevier 10.1016/j.prosdent.2019.05.008

Wittneben, Julia-Gabriela; Gavric, Jelena; Sailer, Irena; Buser, Daniel; Wismeijer, Daniel (2020). Clinical and esthetic outcomes of two different prosthetic workflows for implant-supported all-ceramic single crowns-3 year results of a randomized multicenter clinical trail. Clinical oral implants research, 31(5), pp. 495-505. Wiley-Blackwell 10.1111/clr.13586

Fontolliet, Alain; Al-Haj Husain, Nadin; Özcan, Mutlu (2020). Wear analysis and topographical properties of monolithic zirconia and CoCr against human enamel after polishing and glazing procedures. Journal of the mechanical behavior of biomedical materials, 105(1996-1944), p. 103712. Elsevier 10.1016/j.jmbbm.2020.103712

D'Addazio, Gianmaria; Santilli, Manlio; Rollo, Marco Lorenzo; Cardelli, Paolo; Rexhepi, Imena; Murmura, Giovanna; Al-Haj Husain, Nadin; Sinjari, Bruna; Traini, Tonino; Özcan, Mutlu; Caputi, Sergio (2020). Fracture Resistance of Zirconia-Reinforced Lithium Silicate Ceramic Crowns Cemented with Conventional or Adhesive Systems: An In Vitro Study. Materials, 13(9) Molecular Diversity Preservation International MDPI 10.3390/ma13092012

Koyuncuoglu, Cenker Zeki; Kara, Haluk Baris; Akdemir, Sinan; Demir, Becen; Al-Haj Husain, Nadin; Özcan, Mutlu (2020). Cleaning efficacy of polyetheretherketone tips in eliminating cement remnants around implants with different abutment heights. Journal of oral implantology, 46(6), pp. 548-554. Allen Press 10.1563/aaid-joi-D-19-00095

Maniewicz, Sabrina; Badoud, Isabelle; Herrmann, François R; Chebib, Najla; Ammann, Patrick; Schimmel, Martin; Müller, Frauke; Srinivasan, Murali (2020). In-vitro retention force changes during cyclic dislodging of three novel attachment systems for implant overdentures with different implant angulations. Clinical oral implants research, 31(4), pp. 315-327. Wiley-Blackwell 10.1111/clr.13567

Weber, Adrian; Frauke, Müller; Zimmermann, Patrick; Schimmel, Martin (April 2020). Ein neues CAD/CAM-Duplikationsverfahren zur totalprothetischen Neuversorgung. Quintessenz Zahnmedizin, 71(04), pp. 440-450. Quintessenz Verlag

Yilmaz, Burak; Schimmel, Martin; McGlumphy, Edwin (2020). Rescue of an implant-supported fixed complete prosthesis after the failure of an implant: A dental technique. The journal of prosthetic dentistry, 123(3), pp. 398-402. Elsevier 10.1016/j.prosdent.2019.03.018

Batak, Burcu; Yilmaz, Burak; Shah, Karnik; Rathi, Rajat; Schimmel, Martin; Lang, Lisa (2020). Effect of coded healing abutment height and position on the trueness of digital intraoral implant scans. The journal of prosthetic dentistry, 123(3), pp. 466-472. Elsevier 10.1016/j.prosdent.2019.06.012

Afrashtehfar, Kelvin Ian; Brägger, Urs; Hicklin, Stefan Paul (2020). Reliability of Interproximal Bone Height Measurements in Bone- and Tissue-Level Implants: A Methodological Study for Improved Calibration Purposes. The international journal of oral & maxillofacial implants, 35(2), pp. 289-296. Quintessence Publishing 10.11607/jomi.7763

Koole, Paul; Zonnenberg, Adriaan J.J.; Koole, Ronald (2020). Spray and stretch technique and its effects on mouth opening. The journal of prosthetic dentistry, 123(3), pp. 455-460. Elsevier 10.1016/j.prosdent.2019.05.032

Yilmaz, Burak; Abou-Ayash, Samir (2020). A digital intraoral implant scan technique using a combined healing abutment and scan body system. The journal of prosthetic dentistry, 123(2), pp. 206-209. Elsevier 10.1016/j.prosdent.2019.01.016

Abou-Ayash, Samir; von Maltzahn, Nadine; Passia, Nicole; Freitag-Wolf, Sandra; Reissmann, Daniel R; Luthardt, Ralph G; Mundt, Torsten; Raedel, Michael; Rammelsberg, Peter; Wolfart, Stefan; Kern, Matthias (2020). Stabilizing mandibular complete dentures by a single midline implant-influence on quality of life: 2-year results from a randomized clinical trial comparing different loading protocols. Clinical oral investigations, 24(2), pp. 927-935. Springer-Verlag 10.1007/s00784-019-02969-y

Kheur, Mohit; Kantharia, Nidhi; Lakha, Tabrez; Kheur, Supriya; Al-Haj Husain, Nadin; Özcan, Mutlu (2020). Correction To: Evaluation of mechanical and adhesion properties of glass ionomer cement incorporating nano-sized hydroxyapatite particles. Odontology, 108(1), p. 152. Springer 10.1007/s10266-019-00434-6

Mundt, Torsten; Schwahn, Christian; Heinemann, Friedhelm; Schimmel, Martin; Lucas, Christian; Al Jaghsi, Ahmad (2020). Stabilizing Removable Partial Dentures by Immediate or Delayed Loading of Mini-implants: Chewing Efficiency in a Randomized Controlled Clinical Trial. The international journal of oral & maxillofacial implants, 35(1), pp. 178-186. Quintessence Publishing 10.11607/jomi.7707

Lazarin, Rafael; Ebenezer, Supriya; Benthaus, Kati; Schimmel, Martin (2020). The Impact of the ITI International Team for Implantology on Implant Dentistry: A Retrospective and Descriptive Analysis of 30 Years of Research Support. The international journal of oral & maxillofacial implants, 35(1), e1-e13. Quintessence Publishing 10.11607/jomi.7799

Kheur, Mohit; Kantharia, Nidhi; Lakha, Tabrez; Kheur, Supriya; Al-Haj Husain, Nadin; Özcan, Mutlu (2020). Evaluation of mechanical and adhesion properties of glass ionomer cement incorporating nano-sized hydroxyapatite particles. Odontology, 108(1), pp. 66-73. Springer 10.1007/s10266-019-00427-5

Bischof, Frank; Brägger, Urs; Abou-Ayash, Samir (2020). Digitaler Workflow in der festsitzenden Implantatprothetik. Der Freie Zahnarzt, 64(6), pp. 46-54. Springer-Medizin-Verlag 10.1007/s12614-020-9324-8

Yilmaz, Burak; Schimmel, Martin; Zimmermann, Patrick; Janner, Simone (2020). Use of a New-Generation Mini-Implant and Attachment System for Fabrication of a Maxillary Overdenture. The international journal of prosthodontics, 33(5), pp. 576-581. Quintessence Publishing 10.11607/ijp.6544

Hou, Mei-Yin; Brönnimann, Ben (2020). Gesichtsschmerz – ein Schmerz mit tausend Gesichtern? Leading opinions - Neurologie & Psychiatrie(2020/3), pp. 6-10. Universimed

Hicklin, Stefan Paul; Janner, Simone F. M.; Schnider, Nicole; Chappuis, Vivianne; Buser, Daniel; Brägger, Urs (2020). Early Loading of Titanium Dental Implants with an Intraoperatively Conditioned Hydrophilic Implant Surface: 3-Year Results of a Prospective Case Series Study. The international journal of oral & maxillofacial implants, 35(5), pp. 1013-1020. Quintessence Publishing 10.11607/jomi.8045

Buser, R.; Müller, P.; Stawarczyk, B. (2020). Computergestützte Herstellung von Totalprothesen. Wissen kompakt - Fortbildung für Zahnärzte, 14(4), pp. 129-138. Springer-Medizin-Verlag 10.1007/s11838-020-00119-9

Schimmel, Martin; Abou-Ayash, Samir (2020). The Ageing Mouth. In: Kossioni, Anastassia (ed.) Gerodontology Essentials for Health Care Professionals. Practical Issues in Geriatrics (pp. 17-48). Springer 10.1007/978-3-030-41468-9_2

Wallace, Sara Megan; Watson, Sinead; Schimmel, Martin; Forde, Ciaran; McKenna, Gerry; Woodside, Jayne (2020). Can eating harder textured foods slowly influence appetite? Proceedings of the Nutrition Society, 79(OCE2) Cambridge University Press 10.1017/S0029665120003274

Srinivasan, M.; Carellis, C.; Reissmann, D. R.; Kalberer, N. B.; Abou-Ayash, S.; Schimmel, M. (2020). Does a Sage-based Mouthwash Improve OHRQoL and Xerostomia in Elders? (Unpublished). In: IADR/AADR/CADR General Session. Washington USA.

Fankhauser, N.; Kalberer, N.; Müller, F.; Leles, C. R.; Schimmel, M.; Srinivasan, M. (2020). Reliability of smartphone-cameras for color-mixing chewing-gum test for masticatory efficiency (Unpublished). In: IADR/AADR/CADR General Session. Washington USA.

Fonseca Escalante, Manrique; Molinero Mourelle, Pedro; Forrer, Fiona; Schnider, Nicole; Schimmel, Martin; Brägger, Urs (2020). Clinical performance of one‐piece screw‐retained implant crowns based on CAD/CAM hand‐veneered zirconium dioxide customized abutments with a 6 years and 7 months mean follow‐up. Clinical oral implants research, 31(S20), p. 224. Wiley 10.1111/clr.165_13644

Stuck, Anna K.; Schimmel, Martin (2020). A Geriatric Core Curriculum for Undergraduate Dental Students Research Square 10.21203/rs.3.rs-20869/v1

Enkling, Norbert (2020). Sind Miniimplantate eine Alternative zu Standarddurchmesser-Implantaten? Deutsche zahnärztliche Zeitschrift DZZ, 75(5), pp. 270-275. Deutscher Ärzte-Verlag 10.3238/dzz.2020.0270–0274

Enkling, Norbert (2020). Are mini-implants an alternative to standard-diameter implants? DZZ international, 2(5), pp. 155-159. Deutscher Ärzteverlag 10.3238/dzz-int.2020.0155–0159

2019

El Kholy, Karim; Lazarin, Rafael; Janner, Simone F. M.; Faerber, Karin; Buser, Ramona; Buser, Daniel (2019). Influence of surgical guide support and implant site location on accuracy of static Computer-Assisted Implant Surgery. Clinical oral implants research, 30(11), pp. 1067-1075. Wiley-Blackwell 10.1111/clr.13520

Ducommun, Julien; El Kholy, Karim; Rahman, Lira; Schimmel, Martin; Chappuis, Vivianne; Buser, Daniel (2019). Analysis of trends in implant therapy at a surgical specialty clinic: Patient pool, indications, surgical procedures, and rate of early failures-A 15-year retrospective analysis. Clinical oral implants research, 30(11), pp. 1097-1106. Wiley-Blackwell 10.1111/clr.13523

Leles, Cláudio Rodrigues; Oliveira, Talitha Maria Cabral; de Araújo, Sara Cristina; Nogueira, Túlio Eduardo; Schimmel, Martin (2019). Individual factors associated with masticatory performance of complete denture wearers: A cross-sectional study. Journal of oral rehabilitation, 46(10), pp. 903-911. Wiley 10.1111/joor.12822

Abou-Ayash, Samir; Enkling, Norbert; Srinivasan, Murali; Haueter, Marius; Worni, Andreas; Schimmel, Martin (2019). Evolution of in vivo assessed retention forces in one-piece mini dental implant-retained mandibular overdentures: 5-Year follow-up of a prospective clinical trial. Clinical implant dentistry and related research, 21(5), pp. 968-976. Wiley 10.1111/cid.12816

Nagy, Ursina; Guédat, Christophe; Giannopoulou, Catherine; Schimmel, Martin; Müller, Frauke; Srinivasan, Murali (2019). Microbiological evaluation of LOCATOR® Legacy attachments: A cross-sectional clinical study. Clinical and experimental dental research, 5(5), pp. 476-484. Wiley 10.1002/cre2.209

Koole, Paul; Zonnenberg, Adriaan J.J.; Mulder, Jan (2019). A patient's view on the location of the temporomandibular joint. Cranio : the journal of craniomandibular practice, 37(5), pp. 335-338. Taylor & Francis 10.1080/08869634.2018.1450012

Hasanzade, Mahya; Shirani, Mohammadjavad; Afrashtehfar, Kelvin I.; Naseri, Parisa; Alikhasi, Marzieh (2019). In Vivo and In Vitro Comparison of Internal and Marginal Fit of Digital and Conventional Impressions for Full-Coverage Fixed Restorations: A Systematic Review and Meta-analysis. The journal of evidence-based dental practice, 19(3), pp. 236-254. Elsevier 10.1016/j.jebdp.2019.04.003

Ballal, V; Rao, S; Al-Haj Husain, Nadin; Özcan, M (2019). Evaluation of Smear Layer Removal Using Different Irrigation Methods In Root Canals. European journal of prosthodontics and restorative dentistry EJPRD, 27(3), pp. 97-102. Hancocks 10.1922/EJPRD_01817Husain06

Furze, David; Byrne, Ashley; Alam, Sonia; Brägger, Urs; Wismeijer, Daniel; Wittneben, Julia-Gabriela (2019). Influence of the fixed implant-supported provisional phase on the esthetic final outcome of implant-supported crowns: 3-year results of a randomized controlled clinical trial. Clinical implant dentistry and related research, 21(4), pp. 649-655. Wiley 10.1111/cid.12796

Aleisa, Khalil; Al-Dwairi, Ziad; Abou-Obaid, Alaa; Al-Muharib, Aseel; Al-Rejaye, Najla; Morgano, Steven M; Al-Haj Husain, Nadin; Özcan, Mutlu (2019). Effect of length of LOCATOR abutment and cement type on retention to intraradicular dentin in overdentures. The journal of prosthetic dentistry, 122(2), 152.e1-152.e6. Elsevier 10.1016/j.prosdent.2019.04.023

Bagegni, Aimen; Abou-Ayash, Samir; Rücker, Gerta; Algarny, Ahmad; Att, Wael (2019). The influence of prosthetic material on implant and prosthetic survival of implant-supported fixed complete dentures: a systematic review and meta-analysis. Journal of prosthodontic research, 63(3), pp. 251-265. Elsevier 10.1016/j.jpor.2019.02.001

Srinivasan, Murali; Delavy, Joris; Schimmel, Martin; Duong, Stephan; Zekry, Dina; Trombert, Veronique; Gold, Gabriel; Müller, Frauke (2019). Prevalence of oral hygiene tools amongst hospitalised elders: A cross-sectional survey. Gerodontology, 36(2), pp. 125-133. Wiley-Blackwell 10.1111/ger.12388

Enkling, Norbert; Haueter, Marius; Worni, Andreas; Müller, Frauke; Leles, Cláudio Rodrigues; Schimmel, Martin (2019). A prospective cohort study on survival and success of one-piece mini-implants with associated changes in oral function: Five-year outcomes. Clinical oral implants research, 30(6), pp. 570-577. Wiley-Blackwell 10.1111/clr.13444

Shahi, Shahriar; Özcan, Mutlu; Maleki Dizaj, Solmaz; Sharifi, Simin; Al-Haj Husain, Nadin; Eftekhari, Aziz; Ahmadian, Elham (2019). A review on potential toxicity of dental material and screening their biocompatibility. Toxicology mechanisms and methods, 29(5), pp. 368-377. Taylor & Francis 10.1080/15376516.2019.1566424

Spielau, Thomas; Hauschild, Uli; Katsoulis, Joannis (2019). Computer-assisted, template-guided immediate implant placement and loading in the mandible: a case report. BMC Oral Health, 19(1), p. 55. BioMed Central 10.1186/s12903-019-0746-0

Kalberer, Nicole; Mehl, Albert; Schimmel, Martin; Müller, Frauke; Srinivasan, Murali (2019). CAD-CAM milled versus rapidly prototyped (3D-printed) complete dentures: An in vitro evaluation of trueness. The journal of prosthetic dentistry, 121(4), pp. 637-643. Elsevier 10.1016/j.prosdent.2018.09.001

Leles, Cláudio R; Dias, Danilo R; Nogueira, Túlio E; McKenna, Gerald; Schimmel, Martin; Jordão, Lidia M R (2019). Impact of patient characteristics on edentulous subjects' preferences for prosthodontic rehabilitation with implants. Clinical oral implants research, 30(3), pp. 285-292. Wiley-Blackwell 10.1111/clr.13414

Nogueira, Túlio E; Schimmel, Martin; Leles, Cláudio R (2019). Changes in masticatory performance of edentulous patients treated with single-implant mandibular overdentures and conventional complete dentures. Journal of oral rehabilitation, 46(3), pp. 268-273. Blackwell Scientific Publications 10.1111/joor.12744

Joda, Tim Alexander; Brägger, Urs; Zitzmann, Nicola U (2019). CAD/CAM implant crowns in a digital workflow: Five-year follow-up of a prospective clinical trial. Clinical implant dentistry and related research, 21(1), pp. 169-174. Wiley 10.1111/cid.12681

El Kholy, Karim; Janner, Simone; Schimmel, Martin; Buser, Daniel Albin (2019). The influence of guided sleeve height, drilling distance, and drilling key length on the accuracy of static Computer-Assisted Implant Surgery. Clinical implant dentistry and related research, 21(1), pp. 101-107. Wiley 10.1111/cid.12705

Fontolliet, Marta; Bornstein, Michael; von Arx, Thomas (2019). Characteristics and dimensions of the infraorbital canal: a radiographic analysis using cone beam computed tomography (CBCT). Surgical and radiologic anatomy, 41(2), pp. 169-179. Springer 10.1007/s00276-018-2108-z

Maniewicz, Sabrina; Duvernay, Elena; Srinivasan, Murali; Perneger, Thomas; Schimmel, Martin; Müller, Frauke (2019). Effect of implant-supported mandibular overdentures versus reline on masticatory performance and salivary flow rates in very old adults-A randomized clinical trial. Clinical oral implants research, 30(1), pp. 59-67. Wiley-Blackwell 10.1111/clr.13392

Srinivasan, Murali; Schimmel, Martin; Naharro, Manuel; O' Neill, Ciaran; McKenna, Gerald; Müller, Frauke (2019). CAD/CAM milled removable complete dentures: time and cost estimation study. Journal of dentistry, 80, pp. 75-79. Elsevier Science 10.1016/j.jdent.2018.09.003

Igarashi, Kensuke; Afrashtehfar, Kelvin I.; Schimmel, Martin; Gazzaz, Arwa; Brägger, Urs (2019). Performance of a repair service set for the retrieval of fractured abutment screws: a pilot in vitro study. The international journal of oral & maxillofacial implants, 34(3), pp. 567-573. Quintessence Publishing 10.11607/jomi.7106

Enkling, Norbert; Kraus, Dominik (2019). Aktuelle Trends in der Implantologie. ZWR, 128(09), p. 405. Thieme 10.1055/a-0982-7090

Enkling, Norbert (2019). Die Soforttherapien in der Implantologie: Sofortimplantation, Sofortversorgung und Sofortbelastung. ZWR, 128(09), pp. 446-452. Thieme 10.1055/a-0985-0831

Schimmel, Martin; Genton, Laurence; McKenna, Gerry (2019). Masticatory Function and Nutritional Status: Considerations for an Ageing Population. In: Mersel, Alexandre (ed.) Oral Rehabilitation for Compromised and Elderly Patients (pp. 81-96). Springer 10.1007/978-3-319-76129-9_6

Di Fiore, Adolfo; Vigolo, Paolo; Sivolella, Stefano; Cavallin, Francesco; Katsoulis, Joannis; Monaco, Carlo; Stellini, Edoardo (2019). Influence of Crown-to-Implant Ratio on Long-Term Marginal Bone Loss Around Short Implants. The international journal of oral & maxillofacial implants, 34(4), pp. 992-998. Quintessence Publishing 10.11607/jomi.7161

Enkling, N.; Jöhren, HP.; Bürklein, S.; Lenk, M.; Margraf-Stiksrud, J.; Beck, G.; Daubländer, M.; Wölber, J.; Wannemüller, A.; Dünniger, P.; Bandelow, B.; Benecke, A. (2019). S3-Leitlinie Zahnbehandlungsangst beim Erwachsenen (AWMF-Registernummer: 083-020). AWMF online. Das Portal der wissenschaftlichen Medizin

Fonseca Escalante, Manrique; Cepa, Sandy; Rauberger, Hanna; Blattner, Sarah; Att, Wael (2019). Optical face scanners. In: Att, Wael; Witkowski, Siegbert; Strub, Jörg R. (eds.) Digital Workflow in Reconstructive Dentistry (pp. 53-74). Quintessence Publishing

Att, Wael; Gintaute, Aiste; Fonseca Escalante, Manrique; Lamott, Ulrich (2019). Case 2: Digital Workflow for the fixed implant-supported rehabilitation of edentulous jaws. In: Att, Wael; Witkowski, Siegbert; Strub, Jörg R. (eds.) Digital Workflow in Reconstructive Dentistry (pp. 283-299). Quintessence Publishing

2018

Kröger, Annika; Hülsmann, Claudia; Fickl, Stefan; Spinell, Thomas; Hüttig, Fabian; Kaufmann, Frederic; Heimbach, André; Hoffmann, Per; Enkling, Norbert; Renvert, Stefan; Schwarz, Frank; Demmer, Ryan T; Papapanou, Panos N; Jepsen, Søren; Kebschull, Moritz (2018). The severity of human peri-implantitis lesions correlates with the level of submucosal microbial dysbiosis. Journal of clinical periodontology, 45(12), pp. 1498-1509. Wiley 10.1111/jcpe.13023

Kossioni, Anastassia E; Hajto-Bryk, Justyna; Janssens, Barbara; Maggi, Stefania; Marchini, Leonardo; McKenna, Gerry; Müller, Frauke; Petrovic, Mirko; Roller-Wirnsberger, Regina Elisabeth; Schimmel, Martin; van der Putten, Gert-Jan; Vanobbergen, Jacques; Zarzecka, Joanna (2018). Practical Guidelines for Physicians in Promoting Oral Health in Frail Older Adults. Journal of the American Medical Directors Association, 19(12), pp. 1039-1046. Elsevier 10.1016/j.jamda.2018.10.007

Buser, Ramona; Ziltener, Valerie; Samietz, Stefanie; Fontolliet-Siewczyk, Marta; Nef, Tobias; Schimmel, Martin (2018). Validation of a purpose-built chewing gum and smartphone application to evaluate chewing efficiency. Journal of oral rehabilitation, 45(11), pp. 845-853. Blackwell Scientific Publications 10.1111/joor.12696

Joda, Tim Alexander; Waltimo, Tuomas; Pauli-Magnus, Christiane; Probst-Hensch, Nicole; Zitzmann, Nicola U (2018). Population-Based Linkage of Big Data in Dental Research. International journal of environmental research and public health, 15(11) Molecular Diversity Preservation International MDPI 10.3390/ijerph15112357

Ferrari, Marco; Keeling, Andrew; Mandelli, Federico; Lo Giudice, Giuseppe; Garcia-Godoy, Franklin; Joda, Tim Alexander (2018). The ability of marginal detection using different intraoral scanning systems: A pilot randomized controlled trial. American journal of dentistry, 31(5), pp. 272-276. Mosher & Linder

Mercouriadis-Howald, Alexander; Rollier, Noemie; Tada, Sayaka; McKenna, Gerald; Igarashi, Kensuke; Schimmel, Martin (2018). Loss of natural abutment teeth with cast copings retaining overdentures: a systematic review and meta-analysis. Journal of prosthodontic research, 62(4), pp. 407-415. Elsevier 10.1016/j.jpor.2018.05.002

Schimmel, Martin; Srinivasan, Murali; McKenna, Gerald; Müller, Frauke (2018). Effect of advanced age and/or systemic medical conditions on dental implant survival: A systematic review and meta-analysis. Clinical oral implants research, 29(S16), pp. 311-330. Wiley-Blackwell 10.1111/clr.13288

Wittneben, Julia; Wismeijer, Daniel; Brägger, Urs; Joda, Tim Alexander; Abou-Ayash, Samir (2018). Patient-reported outcome measures focusing on aesthetics of implant- and tooth-supported fixed dental prostheses: A systematic review and meta-analysis. Clinical oral implants research, 29(S16), pp. 224-240. Wiley-Blackwell 10.1111/clr.13295

Feine, Jocelyne; Abou-Ayash, Samir; Al Mardini, Majd; de Santana, Ronaldo Barcelllos; Bjelke-Holtermann, Trine; Bornstein, Michael M.; Brägger, Urs; Cao, Olivia; Cordaro, Luca; Eycken, Didier; Fillion, Mathieu; Gebran, Georges; Huynh-Ba, Guy; Joda, Tim Alexander; Levine, Robert; Mattheos, Nikos; Oates, Thomas W; Abd-Ul-Salam, Hani; Santosa, Robert; Shahdad, Shakeel; ... (2018). Group 3 ITI Consensus Report: Patient-reported outcome measures associated with implant dentistry. Clinical oral implants research, 29(S16), pp. 270-275. Wiley-Blackwell 10.1111/clr.13299

Heitz-Mayfield, Lisa J; Aaboe, Merete; Araujo, Mauricio; Carrión, Juan B; Cavalcanti, Raffaele; Cionca, Norbert; Cochran, David; Darby, Ivan; Funakoshi, Eiji; Gierthmuehlen, Petra C; Hashim, Dena; Jahangiri, Leila; Kwon, Yongdae; Lambert, France; Layton, Danielle M; Lorenzana, Eduardo R; McKenna, Gerald; Mombelli, Andrea; Müller, Frauke; Roccuzzo, Mario; ... (2018). Group 4 ITI Consensus Report: Risks and biologic complications associated with implant dentistry. Clinical oral implants research, 29(S), pp. 351-358. Wiley-Blackwell 10.1111/clr.13307

Joda, Tim Alexander; Derksen, Wiebe; Wittneben, Julia; Kuehl, Sebastian (2018). Static computer-aided implant surgery (s-CAIS) analysing patient-reported outcome measures (PROMs), economics and surgical complications: A systematic review. Clinical oral implants research, 29(S16), pp. 359-373. Wiley-Blackwell 10.1111/clr.13136

Joda, Tim Alexander; Ferrari, Marco; Brägger, Urs; Zitzmann, Nicola U (2018). Patient Reported Outcome Measures (PROMs) of posterior single-implant crowns using digital workflows: A randomized controlled trial with a three-year follow-up. Clinical oral implants research, 29(9), pp. 954-961. Wiley-Blackwell 10.1111/clr.13360

Reissmann, Daniel R; Enkling, Norbert; Moazzin, Rim; Haueter, Marius; Worni, Andreas; Schimmel, Martin (2018). Long-term changes in oral health-related quality of life over a period of 5 years in patients treated with narrow diameter implants: A prospective clinical study. Journal of dentistry, 75, pp. 84-90. Elsevier Science 10.1016/j.jdent.2018.05.019

Guédat, Christophe; Nagy, Ursina; Schimmel, Martin; Müller, Frauke; Srinivasan, Murali (2018). Clinical performance of LOCATOR® attachments: A retrospective study with 1-8 years of follow-up. Clinical and experimental dental research, 4(4), pp. 132-145. Wiley 10.1002/cre2.122

Adánez, Mireia Haro; Brezavšček, Miha; Vach, Kirstin; Fonseca Escalante, Manrique; Att, Wael (2018). Clinical and Radiographic Evaluation of Short Implants Placed in the Posterior Mandible: A 1-Year Pilot Split-Mouth Study. Journal of oral implantology, 44(4), pp. 250-259. Allen Press 10.1563/aaid-joi-D-18-00037

Afrashtehfar, Kelvin Ian; Buser, Daniel Albin; Belser, Urs (2018). A safe holder for adjusting indirect prostheses: The silicone cube technique. The journal of prosthetic dentistry, 120(2), pp. 313-315. Elsevier 10.1016/j.prosdent.2017.11.005

Srinivasan, Murali; Gjengedal, Harald; Cattani-Lorente, Maria; Moussa, Mira; Durual, Stéphane; Schimmel, Martin; Müller, Frauke (2018). CAD/CAM milled complete removable dental prostheses: An in vitro evaluation of biocompatibility, mechanical properties, and surface roughness. Dental materials journal, 37(4), pp. 526-533. Japanese Society for Dental Materials and Devices 10.4012/dmj.2017-207

Daou, Elie E; Özcan, Mutlu; Salameh, Pascale; Al-Haj Husain, Nadin; Salameh, Ziad (2018). Comparison of Adhesion of a Novel Pre-sintered Cobalt-Chromium to Pre-sintered Zirconia and Cast Nickel-Chromium. The journal of contemporary dental practice, 19(7), pp. 816-823. Jaypee Brothers Medical Publishers

Joda, Tim Alexander; Zarone, Fernando; Zitzmann, Nicola U; Ferrari, Marco (2018). The Functional Implant Prosthodontic Score (FIPS): assessment of reproducibility and observer variability. Clinical oral investigations, 22(6), pp. 2319-2324. Springer-Verlag 10.1007/s00784-017-2332-7

Afrashtehfar, Kelvin Ian; Brägger, Urs; Igarashi, Kensuke; Belser, Urs (2018). A modified technique for the intraoral assessment of static occlusal contacts. The journal of prosthetic dentistry, 119(6), pp. 909-911. Elsevier 10.1016/j.prosdent.2017.10.006

Enkling, Norbert; Enkling-Scholl, J; Albrecht, D; Bornstein, M M; Schimmel, Martin (2018). Determination of the occlusal vertical dimension in edentulous patients using lateral cephalograms. Journal of oral rehabilitation, 45(5), pp. 399-405. Blackwell Scientific Publications 10.1111/joor.12624

Igarashi, Kensuke; Afrashtehfar, Kelvin Ian (2018). Clinical assessment of fractured implant abutment screws: The Bernese silicone replica technique. The journal of prosthetic dentistry, 119(5), pp. 717-719. Elsevier 10.1016/j.prosdent.2017.08.005

Brocklehurst, Paul R; McKenna, Gerald; Schimmel, Martin; Kossioni, Anastassia; Jerković-Ćosić, Katarina; Hayes, Martina; da Mata, Cristiane; Müller, Frauke (2018). How do we incorporate patient views into the design of healthcare services for older people: a discussion paper. BMC Oral Health, 18(1), p. 61. BioMed Central 10.1186/s12903-018-0513-7

Joda, Tim Alexander; Voumard, Benjamin; Zysset, Philippe K.; Brägger, Urs; Ferrari, Marco (2018). Ultimate force and stiffness of 2-piece zirconium dioxide implants with screw-retained monolithic lithium-disilicate reconstructions. Journal of prosthodontic research, 62(2), pp. 258-263. Elsevier 10.1016/j.jpor.2017.11.002

Silva, L C; Nogueira, T E; Rios, L F; Schimmel, Martin; Leles, C R (2018). Reliability of a two-colour chewing gum test to assess masticatory performance in complete denture wearers. Journal of oral rehabilitation, 45(4), pp. 301-307. Blackwell Scientific Publications 10.1111/joor.12609

Chappuis, Vivianne; Rahman, Lira; Buser, Ramona; Janner, Simone; Belser, Urs; Buser, Daniel Albin (2018). Effectiveness of Contour Augmentation with Guided Bone Regeneration: 10-Year Results. Journal of dental research, 97(3), pp. 266-274. Sage 10.1177/0022034517737755

Kossioni, Anastassia E; Hajto-Bryk, Justyna; Maggi, Stefania; McKenna, Gerry; Petrovic, Mirko; Roller-Wirnsberger, Regina Elisabeth; Schimmel, Martin; Tamulaitienè, Marija; Vanobbergen, Jacques; Müller, Frauke (2018). An Expert Opinion from the European College of Gerodontology and the European Geriatric Medicine Society: European Policy Recommendations on Oral Health in Older Adults. Journal of the American Geriatrics Society, 66(3), pp. 609-613. Wiley-Blackwell 10.1111/jgs.15191

Wallace, Sara; Samietz, Stefanie; Abbas, Meriem; McKenna, Gerald; Woodside, Jayne V; Schimmel, Martin (2018). Impact of prosthodontic rehabilitation on the masticatory performance of partially dentate older patients: Can it predict nutritional state? Results from a RCT. Journal of dentistry, 68, pp. 66-71. Elsevier Science 10.1016/j.jdent.2017.11.003

Schnider, Nicole; Forrer, Fiona; Brägger, Urs; Hicklin, Stefan Paul (2018). Clinical Performance of One-Piece, Screw-Retained Implant Crowns Based on Hand-Veneered CAD/CAM Zirconia Abutments After a Mean Follow-up Period of 2.3 Years. The international journal of oral & maxillofacial implants, 33(1), pp. 188-196. Quintessence Publishing 10.11607/jomi.5929

Chappuis, Vivianne; Shahim, Kamal; Buser, Ramona; Koller, Edi; Joda, Tim Alexander; Reyes, Mauricio; Buser, Daniel Albin (2018). Novel Collagen Matrix to Increase Tissue Thickness Simultaneous with Guided Bone Regeneration and Implant Placement in Esthetic Implant Sites: A Feasibility Study. The international journal of periodontics & restorative dentistry, 38(July/August), pp. 575-582. Quintessence Publishing 10.11607/prd.3700

Worni, Andreas; Hicklin, Stefan Paul; Mericske-Stern, Regina; Enkling, Norbert (2018). Performance and marginal bone level alteration around immediately loaded narrow-diameter implants. A prospective clinical study: Results after 1 year. Quintessence international, 49(4), pp. 267-276. Quintessenz Verlags-GmbH 10.3290/j.qi.a39947

Buser, Ramona; Yue, Qin; Zimmermann, Patrick; Suter, Valérie; Abou-Ayash, Samir; Schimmel, Martin (2018). Prosthodontic Solutions for Elderly Patients. Forum implantologicum, 14(2), pp. 130-140. Quintessence Publishing Group

Janner, Simone; Suter, Valérie; Schimmel, Martin; Buser, Daniel Albin (2018). Surgical Strategies in Elderly Implant Patients. Forum implantologicum, 14(2), pp. 116-129. Quintessence Publishing Group

Forrer, Fiona; Joda, Tim Alexander (2018). Versorgung eines Patienten mit einer kombiniert zahn- und implantatgetragenen Teleskopprothese - Ein Fallbericht. Quintessenz, 69(2), pp. 170-181. Quintessenz Verlags-GmbH

Özcan, Mutlu; Al-Haj Husain, Nadin; Maziero Volpato, Claudia Angela (2018). Verblendungsfraktur - direkte und indirekte Reparaturmethoden. Quintessenz, 69(6), pp. 650-657. Quintessenz Verlags-GmbH

Müller, Frauke; Schimmel, Martin (2018). Physical and Cognitive Function. In: Emami, Elham; Feine, Jocelyne (eds.) Mandibular Implant Prostheses (pp. 23-35). Cham: Springer 10.1007/978-3-319-71181-2_3

Lückerath, Walter; Röder, Luziana; Enkling, Norbert (2018). The Effect of Primary Stabilization of the Graft in a Combined Surgical and Prosthodontic Ridge Preservation Protocol: A Prospective Controlled Clinical Pilot Study. The international journal of periodontics & restorative dentistry, 38(3), e49-e58. Quintessence Publishing 10.11607/prd.3172

2017

Del Monte, Stefano; Afrashtehfar, Kelvin Ian; Emami, Elham; Abi Nader, Samer; Tamimi, Faleh (2017). Lay preferences for dentogingival esthetic parameters: A systematic review. The journal of prosthetic dentistry, 118(6), pp. 717-724. Elsevier 10.1016/j.prosdent.2017.04.032

Afrashtehfar, Kelvin Ian; Tamimi, Faleh (2017). An online tool that provides access to evidence-based literature on dental restorations: www.crownorfill.com. The journal of prosthetic dentistry, 118(6), pp. 696-697. Elsevier 10.1016/j.prosdent.2017.02.001

Kaya, M S; Güçlü, B; Schimmel, Martin; Akyüz, S (2017). Two-colour chewing gum mixing ability test for evaluating masticatory performance in children with mixed dentition: validity and reliability study. Journal of oral rehabilitation, 44(11), pp. 827-834. Wiley 10.1111/joor.12548

Zimmermann, P; Schimmel, Martin (November 2017). Der betagte Patient in der Implantatprothetik – zahntechnische Aspekte bei der Versorgung von Patienten im dritten und vierten Alter. Zahntechnik Magazin, 21(8), pp. 536-547. Spitta

Joda, Tim Alexander; Ferrari, Marco; Brägger, Urs (2017). A prospective clinical cohort study analyzing single-unit implant crowns after three years of loading: introduction of a novel Functional Implant Prosthodontic Score (FIPS). Clinical oral implants research, 28(10), pp. 1291-1295. Wiley-Blackwell 10.1111/clr.12955

Joda, Tim Alexander; Lenherr, Patrik; Dedem, Philipp; Kovaltschuk, Irina; Brägger, Urs; Zitzmann, Nicola U (2017). Time efficiency, difficulty, and operator's preference comparing digital and conventional implant impressions: a randomized controlled trial. Clinical oral implants research, 28(10), pp. 1318-1323. Wiley-Blackwell 10.1111/clr.12982

Zitzmann, Nicola U; Kovaltschuk, Irina; Lenherr, Patrik; Dedem, Philipp; Joda, Tim Alexander (2017). Dental Students' Perceptions of Digital and Conventional Impression Techniques: A Randomized Controlled Trial. Journal of dental education, 81(10), pp. 1227-1232. American Dental Education Association 10.21815/JDE.017.081

Kraus, Dominik; Wolfgarten, Markus; Enkling, Norbert; Helfgen, Ernst-Heinrich; Frentzen, Matthias; Probstmeier, Rainer; Winter, Jochen; Stark, Helmut (2017). In-vitro cytocompatibility of dental resin monomers on osteoblast-like cells. Journal of dentistry, 65, pp. 76-82. Elsevier Science 10.1016/j.jdent.2017.07.008

Passia, Nicole; Abou-Ayash, Samir; Reissmann, Daniel R; Fritzer, Elfriede; Kappel, Stefanie; Konstantinidis, Ioannis; Königsmarck, Valerie V; Mundt, Torsten; Stiesch, Meike; Wolfart, Stefan; Ali, Shurouk; Kern, Matthias (2017). Single mandibular implant study (SMIS) - masticatory performance - results from a randomized clinical trial using two different loading protocols. Journal of dentistry, 65, pp. 64-69. Elsevier Science 10.1016/j.jdent.2017.07.005

Afrashtehfar, Kelvin Ian; Ahmadi, M; Emami, E; Abi-Nader, S; Tamimi, F (2017). Failure of single-unit restorations on root filled posterior teeth: a systematic review. International endodontic journal, 50(10), pp. 951-966. Wiley-Blackwell 10.1111/iej.12723

Joda, Tim Alexander; Zarone, Fernando; Ferrari, Marco (2017). The complete digital workflow in fixed prosthodontics: a systematic review. BMC Oral Health, 17(1), p. 124. BioMed Central 10.1186/s12903-017-0415-0

Müller, Frauke; Shimazaki, Yoshihiro; Kahabuka, Febronia; Schimmel, Martin (2017). Oral health for an ageing population: the importance of a natural dentition in older adults. International dental journal, 67(Suppl 2), pp. 7-13. Wiley-Blackwell 10.1111/idj.12329

Meyer, Simon; Giannopoulou, Catherine; Courvoisier, Delphine; Schimmel, Martin; Müller, Frauke; Mombelli, Andrea (2017). Experimental mucositis and experimental gingivitis in persons aged 70 or over. Clinical and biological responses. Clinical oral implants research, 28(8), pp. 1005-1012. Wiley-Blackwell 10.1111/clr.12912

Schneebeli, Esther; Brägger, Urs; Scherrer, Susanne S; Keller, Anita; Wittneben, Julia; Hicklin, Stefan P (2017). Quality Evaluation of Zirconium Dioxide Frameworks Produced in Five Dental Laboratories from Different Countries. Journal of prosthodontics, 26(5), pp. 399-409. Wiley 10.1111/jopr.12391

Srinivasan, Murali; Cantin, Yoann; Mehl, Albert; Gjengedal, Harald; Müller, Frauke; Schimmel, Martin (2017). CAD/CAM milled removable complete dentures: an in vitro evaluation of trueness. Clinical oral investigations, 21(6), pp. 2007-2019. Springer-Verlag 10.1007/s00784-016-1989-7

Afrashtehfar, Kelvin Ian; Assery, Mansour K (2017). From dental science to clinical practice: Knowledge translation and evidence-based dentistry principles. The Saudi dental journal, 29(3), pp. 83-92. Elsevier 10.1016/j.sdentj.2017.02.002

Afrashtehfar, Kelvin I.; Chung, Jason (2017). Mouthguard use may reduce dentofacial injuries in field hockey players. Evidence-based dentistry, 18(2), pp. 48-49. Springer Nature 10.1038/sj.ebd.6401239

Joda, Tim Alexander; Ferrari, Marco; Brägger, Urs (2017). Monolithic implant-supported lithium disilicate (LS2) crowns in a complete digital workflow: A prospective clinical trial with a 2-year follow-up. Clinical implant dentistry and related research, 19(3), pp. 505-511. Wiley 10.1111/cid.12472

Enkling, Norbert; Saftig, Marcus; Worni, Andreas; Mericske-Stern, Regina; Schimmel, Martin (2017). Chewing efficiency, bite force and oral health-related quality of life with narrow diameter implants - a prospective clinical study: results after one year. Clinical oral implants research, 28(4), pp. 476-482. Wiley-Blackwell 10.1111/clr.12822

Schimmel, Martin; Ono, T; Lam, O L T; Müller, F (2017). Oro-facial impairment in stroke patients. Journal of oral rehabilitation, 44(4), pp. 313-326. Wiley 10.1111/joor.12486

Kossioni, Anastassia; McKenna, Gerry; Müller, Frauke; Schimmel, Martin; Vanobbergen, Jacques (2017). Higher education in Gerodontology in European Universities. BMC Oral Health, 17(1), p. 71. BioMed Central 10.1186/s12903-017-0362-9

Schimmel, Martin; Voegeli, G; Duvernay, E; Leemann, B; Müller, F (2017). Oral tactile sensitivity and masticatory performance are impaired in stroke patients. Journal of oral rehabilitation, 44(3), pp. 163-171. Wiley 10.1111/joor.12482

Huanca Ghislanzoni, L; Leemann, B; Christou, P; Müller, F; Schimmel, Martin; Kiliaridis, S (2017). Palatal morphology changes in post-stroke patients measured by geometric morphometrics. Journal of oral rehabilitation, 44(3), pp. 172-177. Wiley 10.1111/joor.12484

Afrashtehfar, Kelvin Ian; Brägger, Urs; Treviño-Santos, Alejandro; Freitas de Souza, Raphael (2017). Letters to the editor. Evidence-based dentistry, 18(1), p. 2. Springer Nature 10.1038/sj.ebd.6401212

Afrashtehfar, Kelvin Ian; Emami, Elham; Ahmadi, Motahareh; Eilayyan, Owis; Abi-Nader, Samer; Tamimi, Faleh (2017). Failure rate of single-unit restorations on posterior vital teeth: A systematic review. The journal of prosthetic dentistry, 117(3), 345-353.e8. Elsevier 10.1016/j.prosdent.2016.08.003

Joda, Tim Alexander; Ferrari, Marco; Gallucci, German O; Wittneben, Julia; Brägger, Urs (2017). Digital technology in fixed implant prosthodontics. Periodontology 2000, 73(1), pp. 178-192. Wiley 10.1111/prd.12164

Schimmel, Martin; Müller, Frauke; Suter, Valérie; Buser, Daniel Albin (2017). Implants for elderly patients. Periodontology 2000, 73(1), pp. 228-240. Wiley 10.1111/prd.12166

Wittneben, Julia; Joda, Tim Alexander; Weber, Hans-Peter; Brägger, Urs (2017). Screw retained vs. cement retained implant-supported fixed dental prosthesis. Periodontology 2000, 73(1), pp. 141-151. Wiley 10.1111/prd.12168

Bischof, Frank (2017). Einfluss des Einschleifens auf die Oberflächenrauheit von CAD/CAM-Lithiumdisilikatkeramik Kronen. (Dissertation, Universität Bern, Medizinische Fakultät, Zahnmedizinische Kliniken, Klinik für rekonstruktive Zahnmedizin und Gerodontologie)

Worni, Andreas; Katsoulis, Joannis; Kolgeci, Lumni; Worni, Mathias; Mericske, Regina (2017). Monolithic zirconia reconstructions supported by teeth and implants: 1- to 3-year results of a case series. Quintessence international, 48(6), pp. 459-467. Quintessenz Verlags-GmbH 10.3290/j.qi.a38138

Katsoulis, Joannis; Takeichi, Takuro; Gaviria, Ana Sol; Peter, Lukas; Katsoulis, Konstantinos (2017). Misfit of implant prostheses and its impact on clinical outcomes. Definition, assessment and a systematic review of the literature. European journal of oral implantology, 10(Suppl 1), pp. 121-138. Quintessence Pub.

Freedman, GA; Afrashtehfar, Kelvin Ian (2017). Cone beam computed tomography in the mainstream. Revista Dentista y Paciente(103), pp. 18-25.

Abou-Ayash, Samir; Strasding, Malin; Rücker, Gerta; Att, Wael (2017). Impact of prosthetic material on mid- and long-term outcome of dental implants supporting single crowns and fixed partial dentures: A systematic review and meta-analysis. European journal of oral implantology, 10(Suppl 1), pp. 47-65. Quintessence Pub.

Park, Ji-Man; Baek, Chang-Hyun; Heo, Seong-Joo; Kim, Seong-Kyun; Koak, Jai-Young; Kim, Shin-Koo; Belser, Urs (2017). An In Vitro Evaluation of the Loosening of Different Interchangeable Abutments in Internal-Connection-Type Implants. The international journal of oral & maxillofacial implants, 32(2), pp. 350-355. Quintessence Publishing 10.11607/jomi.5295

Schimmel, Martin; Memedi, Kujtim; Parga, Tatiana; Katsoulis, Joannis; Müller, Frauke (2017). Masticatory Performance and Maximum Bite and Lip Force Depend on the Type of Prosthesis. International journal of prosthodontics, 30(6), pp. 565-572. Quintessence Publ. 10.11607/ijp.5289

Maniewicz, Sabrina; Buser, Ramona; Duvernay, Elena; Vazquez, Lydia; Loup, Angelica; Perneger, Thomas V; Schimmel, Martin; Müller, Frauke (2017). Short Dental Implants Retaining Two-Implant Mandibular Overdentures in Very Old, Dependent Patients: Radiologic and Clinical Observation Up to 5 Years. The international journal of oral & maxillofacial implants, 32(2), pp. 415-422. Quintessence Publishing 10.11607/jomi.5361

Abou-Ayash, Samir; Boldt, Johannes; Vuck, Alexander (2017). Computer-Aided Design/Computer-Assisted Manufacture Monolithic Restorations for Severely Worn Dentition: A Case History Report. International journal of prosthodontics, 30(6), pp. 530-532. Quintessence Publ. 10.11607/ijp.5500

Gnädinger, L; Gagesch, M; Schimmel, Martin (2017). Bruxism in connection with neurocognitive disorders (in German). Swiss dental journal, 127(12), pp. 1079-1085. Schweizerische Zahnärzte-Gesellschaft SSO

Jurczyk, Karolina; Belser, Urs C; Sculean, Anton (2017). The Management of Peri-implant Mucosa Deficiencies in Esthetic Sites: Case Report of a Combined Surgical-Prosthetic Approach. The international journal of periodontics & restorative dentistry, 37(6), pp. 809-817. Quintessence Publishing 10.11607/prd.3163

Reichelt, Joana; Bär, German; Poerschke, Frank; Stark, Helmut; Enkling, Norbert; Kraus, Dominik (2017). Neuartige Herstellung von Totalprothesen im digitalen Workflow. Swiss dental journal, 127(11), pp. 967-975. Schweizerische Zahnärzte-Gesellschaft SSO

Schimmel, Martin; Zimmermann, P (2017). A maxillary overenture retained by four Straumann® Novaloc® abutments. The Dent Technician(70), pp. 10-11.

Schimmel, Martin; Zimmermann, P (2017). Exzellente Dentale Ästhetik. QDT Japan, 42(9), pp. 142-143.

Schimmel, Martin; Müller, F; Suter, Valérie; Buser, Daniel Albin (2017). Implantatprothetik bei hochaltrigen Patienten. GERO DENTAL(4), pp. 6-20.

Vuck, A; Abou-Ayash, Samir (2017). Winkelkompensierendes Attachmentsystem zur Verankerung implantatretinierter Hybridprothesen – eine Falldarstellung. Deutsche zahnärztliche Zeitschrift DZZ, 72(1), pp. 14-21. Deutscher Ärzte-Verlag

Bassetti, Mario; Bassetti, Renzo; Sculean, Anton; Salvi, Giovanni Edoardo; Bornstein, Michael; Ramseier, Christoph (2017). The Impact of Brief Interventions for Tobacco Cessation on Patients' Awareness of Cigarette Smoking as a Risk Factor for Chronic Periodontitis. Oral health & preventive dentistry, 15(4), pp. 391-397. Quintessenz Verlags-GmbH 10.3290/j.ohpd.a38737

Schimmel, Martin (2017). Pflegebedürftige Betagte: Tipps zur Hygiene der Restbezahnung und der Prothesen / Anleitung zum Zähnebürsten bei unselbstständigen Patienten. In: Zahnschäden sind vermeidbar (pp. 63-65). Zentrum für Zahnmedizin der Universität Zürich, Gesundheitsförderung Schweiz und der Schweizerischen Zahnärzte-Gesellschaft SSO

Schimmel, Martin; Cantin, Yoann; Srinivasan, Murali; Müller, Frauke (2017). Digitale Prothese im klinischen Test. Swiss Dental Community, 2017(1), p. 48. Teamwork Media

2016

Apicella, Davide; Joda, Tim Alexander; Bonadeo, Gianni; Sorrentino, Roberto; Ferrari, Marco (2016). Case-specific finite element analysis of dental CAD/CAM prostheses to identify design flaws prior to manufacture. American journal of dentistry, 29(6), pp. 339-344. Mosher & Linder

Furze, David; Byrne, Ashley; Alam, Sonia; Wittneben, Julia-Gabriela (2016). Esthetic Outcome of Implant Supported Crowns With and Without Peri-Implant Conditioning Using Provisional Fixed Prosthesis: A Randomized Controlled Clinical Trial. Clinical implant dentistry and related research, 18(6), pp. 1153-1162. Wiley 10.1111/cid.12416

Joda, Tim; Brägger, Urs (2016). Patient-centered outcomes comparing digital and conventional implant impression procedures: a randomized crossover trial. Clinical oral implants research, 27(12), e185-e189. Wiley-Blackwell 10.1111/clr.12600

Afrashtehfar, Kelvin I.; Schimmel, Martin (2016). Muscular activity may improve in edentulous patients after implant treatment. Evidence-based dentistry, 17(4), pp. 119-120. Springer Nature 10.1038/sj.ebd.6401207

Joda, Tim; Brägger, Urs (2016). Time-efficiency analysis of the treatment with monolithic implant crowns in a digital workflow: a randomized controlled trial. Clinical oral implants research, 27(11), pp. 1401-1406. Wiley-Blackwell 10.1111/clr.12753

Wittneben, Julia; Brägger, Urs; Buser, Daniel; Joda, Tim (2016). Volumetric Calculation of Supraimplant Submergence Profile After Soft Tissue Conditioning with a Provisional Restoration. International journal of periodontics & restorative dentistry, 36(6), pp. 785-790. Quintessence Publ. 10.11607/prd.2742

Joda, Tim; Katsoulis, Joannis; Brägger, Urs (2016). Clinical Fitting and Adjustment Time for Implant-Supported Crowns Comparing Digital and Conventional Workflows. Clinical implant dentistry and related research, 18(5), pp. 946-954. Blackwell 10.1111/cid.12377

Ebinger, Andreas; Katsoulis, Joannis; Hakimi, Mariam; Mazzi, Davide; Mericske, Regina (2016). Mucosal Manifestations in the Edentulous Maxilla with Implant Supported Prostheses: Clinical Results from a Well-Maintained Patient Cohort. Clinical implant dentistry and related research, 18(4), pp. 639-648. Blackwell 10.1111/cid.12345

Joda, Tim; Ferrari, Marco; Brägger, Urs (2016). A digital approach for one-step formation of the supra-implant emergence profile with an individualized CAD/CAM healing abutment. Journal of prosthodontic research, 60(3), pp. 220-223. Elsevier 10.1016/j.jpor.2016.01.005

Srinivasan, Murali; Schimmel, Martin; Kobayashi, Mariko; Badoud, Isabelle; Ammann, Patrick; Herrmann, François R; Müller, Frauke (2016). Influence of different lubricants on the retentive force of LOCATOR(®) attachments - an in vitro pilot study. Clinical oral implants research, 27(7), pp. 771-775. Wiley-Blackwell 10.1111/clr.12680

Afrashtehfar, Cyrus D M; Marleau, Annie; Afrashtehfar, Kelvin I (2016). HOW DO I MANAGE A PATIENT WITH LATERAL LUXATION OF A PERMANENT INCISOR? Journal of the Canadian Dental Association, 82(g21), g21. Canadian Dental Association

Tettamanti, Sandro; Millen, Christopher; Gavric, Jelena; Buser, Daniel; Belser, Urs; Brägger, Urs; Wittneben, Julia (2016). Esthetic Evaluation of Implant Crowns and Peri-Implant Soft Tissue in the Anterior Maxilla: Comparison and Reproducibility of Three Different Indices. Clinical implant dentistry and related research, 18(3), pp. 517-526. Blackwell 10.1111/cid.12306

Roehling, Stefan; Woelfler, Henriette; Hicklin, Stefan; Kniha, Heinz; Gahlert, Michael (2016). A Retrospective Clinical Study with Regard to Survival and Success Rates of Zirconia Implants up to and after 7 Years of Loading. Clinical implant dentistry and related research, 18(3), pp. 545-558. Blackwell 10.1111/cid.12323

Kniha, Kristian; Gahlert, Michael; Hicklin, Stefan; Brägger, Urs; Kniha, Heinz; Milz, Stefan (2016). Evaluation of Hard and Soft Tissue Dimensions Around Zirconium Oxide Implant-Supported Crowns: A 1-Year Retrospective Study. Journal of periodontology, 87(5), pp. 511-518. American Academy of Periodontology 10.1902/jop.2015.150441

Srinivasan, Murali; Schimmel, Martin; Badoud, Isabelle; Ammann, Patrick; Herrmann, François R; Müller, Frauke (2016). Influence of implant angulation and cyclic dislodging on the retentive force of two different overdenture attachments - an in vitro study. Clinical oral implants research, 27(5), pp. 604-611. Wiley-Blackwell 10.1111/clr.12643

Müller, Philipp; Ender, Andreas; Joda, Tim; Katsoulis, Joannis (2016). Impact of digital intraoral scan strategies on the impression accuracy using the TRIOS Pod scanner. Quintessence international, 47(4), pp. 343-349. Quintessenz Verlags-GmbH 10.3290/j.qi.a35524

Kremer Hovinga, Urs; Schindler, Sven; Enkling, Norbert; Worni, Andreas; Katsoulis, Joannis; Mericske, Regina (2016). Bone resorption in different parts of the mandible in patients restored with an implant overdenture. A retrospective radiographic analysis. Clinical oral implants research, 27(3), pp. 267-272. Wiley-Blackwell 10.1111/clr.12523

Kuchler, Ulrike; Chappuis, Vivianne; Bornstein, Michael; Siewczyk, Marta; Gruber, Reinhard; Maestre, Laura; Buser, Daniel (2016). Development of Implant Stability Quotient values of implants placed with simultaneous sinus floor elevation - results of a prospective study with 109 implants. Clinical oral implants research, 28(1), n/a-n/a. Wiley-Blackwell 10.1111/clr.12768

Hicklin, Stefan; Schneebeli, Esther; Chappuis, Vivianne; Janner, Simone; Buser, Daniel; Brägger, Urs (2016). Early loading of titanium dental implants with an intra-operatively conditioned hydrophilic implant surface after 21 days of healing. Clinical oral implants research, 27(7), pp. 875-883. Wiley-Blackwell 10.1111/clr.12706

Bassetti, Renzo Giulio; Mericske, Regina; Enkling, Norbert (2016). Are there differences in the changes in oral-health-related quality of life (OHRQoL) depending on the type (rigidity) of prosthetic treatment? Quintessence international, 47(9), pp. 749-757. Quintessenz Verlags-GmbH 10.3290/j.qi.a36384

Joda, Tim; Müller, Philipp; Zimmerling, Frank; Schimmel, Martin (2016). Réalisation de prothèses complètes avec le système CAO/FAO «Digital Denture Professional». Swiss dental journal, 126(10), pp. 899-919. Schweizerische Zahnärzte-Gesellschaft SSO

Schimmel, Martin (2016). Editorial: Preventive strategies in geriatric dental medicine. Oral health & preventive dentistry, 14(4), pp. 291-292. Quintessenz Verlags-GmbH 10.3290/j.ohpd.a36658

Müller, Frauke; Schimmel, Martin (2016). Revised Success Criteria: A Vision to Meet Frailty and Dependency in Implant Patients. The international journal of oral & maxillofacial implants, 31(1), p. 15. Quintessence Publishing

Touyz, Louis Z.G.; Afrashtehfar, Kelvin I. (2016). Cryogenically salvaged teeth as a potential source for grafting dentoalveolar, periodontal or maxillofacial defects. Medical hypotheses, 92, pp. 28-30. Elsevier 10.1016/j.mehy.2016.04.028

Belser, Urs; Gallucci, German; Afrashtehfar, Kelvin I.; Buser, Daniel Albin (2016). Prosthetically driven techniques to compensate peri-implant soft tissue deficiencies. Forum implantologicum, 12(2), pp. 86-97. Quintessence Publishing Group

Freedman, George A.; Afrashtehfar, Kelvin Ian (2016). [Wireless sensors for digital dental radiography]. Revista Dentista y Paciente, 2016, pp. 48-56.

Schimmel, Martin (2016). Stroke and its potential impacts on orofacial function. Journal of craniomandibular function, 8(4), pp. 283-286. Quintessenz

Touyz, Louis Z.G.; Afrashtehfar, Kelvin I. (2016). Soft Drink Consumption: Innocent Indulgence or Dangerous Drinking Habit? Smile dental journal, 11(4), pp. 38-40.

Schimmel, Martin (2016). Improving a centenarian's quality of life. In: ITI Treatment Guide Volume 9: Implant Therapy in the Geriatric Patient (pp. 187-192). Quintessence Publishing

Schimmel, Martin (2016). (Compendium of oral hygiene for elders in long-term care facilities). Swiss Dental Society SSO

Schimmel, Martin; Müller, Frauke; Suter, Valérie; Buser, Daniel (2016). Implantatversorgung bei Hochbetagten. Implantologie, 24(4), pp. 355-365. Quintessenz Verlags-GmbH

2015

Katsoulis, Joannis; Mericske, Regina; Enkling, Norbert; Katsoulis, Konstantinos; Blatz, Markus B. (2015). In vitro precision of fit of computer-aided designed and computer-aided manufactured titanium screw-retained fixed dental prostheses before and after ceramic veneering. Clinical oral implants research, 26(1), pp. 44-49. Wiley-Blackwell 10.1111/clr.12299

Joda, Tim; Huber, Samuel; Bürki, Alexander; Zysset, Philippe; Brägger, Urs (2015). Influence of Abutment Design on Stiffness, Strength, and Failure of Implant-Supported Monolithic Resin Nano Ceramic (RNC) Crowns. Clinical implant dentistry and related research, 17(6), pp. 1200-1207. Blackwell 10.1111/cid.12215

Worni, Andreas; Kolgeci, Lumni; Rentsch-Kollar, Andrea; Katsoulis, Joannis; Mericske, Regina (2015). Zirconia-Based Screw-Retained Prostheses Supported by Implants: A Retrospective Study on Technical Complications and Failures. Clinical implant dentistry and related research, 17(6), pp. 1073-1081. Blackwell 10.1111/cid.12214

Di Fiore, Adolfo; Meneghello, Roberto; Savio, Gianpaolo; Sivolella, Stefano; Katsoulis, Joannis; Stellini, Edoardo (2015). In Vitro Implant Impression Accuracy Using a New Photopolymerizing SDR Splinting Material. Clinical implant dentistry and related research, 17(Suppl 2), e721-e729. Blackwell 10.1111/cid.12321

Jervøe-Storm, Pia-Merete; Jepsen, Søren; Jöhren, Peter; Mericske, Regina; Enkling, Norbert (2015). Internal bacterial colonization of implants: association with peri-implant bone loss. Clinical oral implants research, 26(8), pp. 957-963. Wiley-Blackwell 10.1111/clr.12421

Schimmel, Martin; Christou, Panagiotis; Miyazaki, Hideo; Halazonetis, Demetrios; Herrmann, François R; Müller, Frauke (2015). A novel colourimetric technique to assess chewing function using two-coloured specimens: Validation and application. Journal of dentistry, 43(8), pp. 955-964. Elsevier Science 10.1016/j.jdent.2015.06.003

Quirynen, Marc; Al-Nawas, Bilal; Meijer, Henny J A; Razavi, Amir; Reichert, Torsten E; Schimmel, Martin; Storelli, Stefano; Romeo, Eugenio (2015). Small-diameter titanium Grade IV and titanium-zirconium implants in edentulous mandibles: three-year results from a double-blind, randomized controlled trial. Clinical oral implants research, 26(7), pp. 831-840. Wiley-Blackwell 10.1111/clr.12367

Joda, Tim; Gallucci, German O (2015). The virtual patient in dental medicine. Clinical oral implants research, 26(6), pp. 725-726. Wiley-Blackwell 10.1111/clr.12379

Elsig, Fanny; Schimmel, Martin; Duvernay, Elena; Giannelli, Sandra V; Graf, Christoph E; Carlier, Sabrina; Herrmann, François R; Michel, Jean-Pierre; Gold, Gabriel; Zekry, Dina; Müller, Frauke (2015). Tooth loss, chewing efficiency and cognitive impairment in geriatric patients. Gerodontology, 32(2), pp. 149-156. Wiley-Blackwell 10.1111/ger.12079

Stähli, Alexandra Beatrice; Bassetti, Mario; Salvi, Giovanni Edoardo; Sculean, Anton; Mericske, Regina; Bassetti, Renzo (2015). Allongement chirurgical de couronnes cliniques pour améliorer la largeur biologique et l’esthétique. Swiss dental journal, 125(5), pp. 577-595. Schweizerische Zahnärzte-Gesellschaft SSO

Katsoulis, Joannis; Müller, Philipp; Mericske, Regina; Blatz, Markus B (2015). CAD/CAM fabrication accuracy of long- vs. short-span implant-supported FDPs. Clinical oral implants research, 26(3), pp. 245-249. Wiley-Blackwell 10.1111/clr.12522

Albrecht, Dominic; Ramierez, Ami; Kremer Hovinga, Urs; Katsoulis, Joannis; Mericske, Regina; Enkling, Norbert (2015). Space requirement of a prefabricated bar on two interforaminal implants: a prospective clinical study. Clinical oral implants research, 26(2), pp. 143-148. Wiley-Blackwell 10.1111/clr.12304

Bassetti, Renzo; Werder, Peter; Crameri, Manuel; Ebinger, Anderas; Stähli, Alexandra Beatrice; Mericske, Regina; Kuttenberger, Johannes (2015). The patent nasopalatine duct: a potential cause of unclear pain in the anterior maxilla. Quintessence international, 46(1), pp. 73-79. Quintessenz Verlags-GmbH 10.3290/j.qi.a32815

Katsoulis, Joannis; Wälchli, Julia; Kobel, Simone; Mericske, Regina (2015). Complications with computer-aided designed/computer-assisted manufactured titanium and soldered gold bars for mandibular implant-overdentures: short-term observations. Clinical implant dentistry and related research, 17(Suppl 1), e75-85. Blackwell 10.1111/cid.12130

Joda, Tim; Michelaki, Ioanna; Heydecke, Guido (2015). Peri-implant bone loss of dental implants with platform-switching design after 5 years of loading: a cross-sectional study. Quintessence international, 46(1), pp. 59-66. Quintessenz Verlags-GmbH 10.3290/j.qi.a32820

Dula, Karl; Benic, Goran I; Bornstein, Michael; Dagassan-Berndt, Dorothea; Filippi, Andreas; Hicklin, Stefan; Kissling-Jeger, Franziska; Luebbers, Heinz-Theo; Sculean, Anton; Sequeira, Patrick; Walter, Clemens; Zehnder, Matthias (2015). SADMFR Guidelines for the Use of Cone-Beam Computed Tomography/Digital Volume Tomography. Swiss dental journal, 125(9), pp. 945-953. Schweizerische Zahnärzte-Gesellschaft SSO

Millen, Christopher; Brägger, Urs; Wittneben, Julia (2015). Influence of prosthesis type and retention mechanism on complications with fixed implant-supported prostheses: a systematic review applying multivariate analyses. International journal of oral & maxillofacial implants, 30(1), pp. 110-124. Quintessence Publ. 10.11607/jomi.3607

Antonini, Linda; Vajtai, Istvan; Bornstein, Michael (2015). Das zentrale Riesenzellgranulom: Ein Fallbericht. Swiss dental journal, 125(9), pp. 954-955. Schweizerische Zahnärzte-Gesellschaft SSO

Joda, Tim; Bürki, Alexander; Bethge, Stefan; Brägger, Urs; Zysset, Philippe (2015). Stiffness, Strength, and Failure Modes of Implant-Supported Monolithic Lithium Disilicate Crowns: Influence of Titanium and Zirconia Abutments. International journal of oral & maxillofacial implants, 30(6), pp. 1272-1279. Quintessence Publ. 10.11607/jomi.3975

Joda, Tim; Brägger, Urs (2015). Time-Efficiency Analysis Comparing Digital and Conventional Workflows for Implant Crowns: A Prospective Clinical Crossover Trial. International journal of oral & maxillofacial implants, 30(5), pp. 1047-1053. Quintessence Publ. 10.11607/jomi.3963

Worni, Andreas; Gholami, Hadi; Marchand, Laurent; Katsoulis, Joannis; Mericske, Regina; Enkling, Norbert (2015). Retrievability of implant-supported crowns when using three different cements: a controlled clinical trial. International journal of prosthodontics, 28(1), pp. 22-29. Quintessence Publ. 10.11607/ijp.4119

Joda, Tim (2015). Time-dependent supraimplant mucosa changes: short communication. International journal of oral & maxillofacial implants, 30(3), pp. 619-621. Quintessence Publ. 10.11607/jomi.4105

Joda, Tim; Brägger, Urs (2015). Management of a complication with a fractured zirconia implant abutment in the esthetic zone. International journal of oral & maxillofacial implants, 30(1), e21-e23. Quintessence Publ. 10.11607/jomi.3827

Schimmel, Martin; Katsoulis, Joannis; Genton, Laurence; Müller, Frauke (2015). Masticatory function and nutrition in old age. Swiss dental journal, 125(4), pp. 449-454. Schweizerische Zahnärzte-Gesellschaft SSO

Siewczyk, Marta; Altermatt, Hans Jörg; Bornstein, Michael (2015). Das invertierte duktale Papillom: Eine Neoplasie der kleinen Speicheldrüsen. Swiss dental journal, 125(1), pp. 28-29. Schweizerische Zahnärzte-Gesellschaft SSO

Müller, Frauke; Al-Nawas, Bilal; Storelli, Stefano; Quirynen, Marc; Hicklin, Stefan; Castro-Laza, Jose; Bassetti, Renzo; Schimmel, Martin (2015). Small-diameter titanium grade IV and titanium-zirconium implants in edentulous mandibles: five-year results from a double-blind, randomized controlled trial. BMC Oral Health, 15(1), p. 123. BioMed Central 10.1186/s12903-015-0107-6

2014

Katsoulis, Joannis; Katsoulis, Konstantinos; Mericske, Regina; Blatz, Markus (24 April 2014). Precision of fit of full-Arch CAD/CAM titanium FDP's before an after veneering: an in-vitro study using the Straumann CARES-System (Unpublished). In: ITI World Symposium. Genf. 24.-26.04.2014.

Gigandet, Michel; Gianni, Bigolin; Francisco, Faoro; Bürgin, Walter Bruno; Brägger, Urs (2014). Implants with Original and Non-Original Abutment Connections. Clinical implant dentistry and related research, 16(2), pp. 303-311. Oxford: Blackwell 10.1111/j.1708-8208.2012.00479.x

Bassetti, Renzo; Reischel, Simone; Öztürk, Sükran; Bassetti, Mario; Mericske, Regina; Enkling, Norbert (2014). Factors Associated with Bone Level Alterations at Implants with Inner-Cone Connection and Platform Switching. Journal of Dental Surgery, 2014(685803), pp. 1-7. Hindawi 10.1155/2014/685803

2013

Kremer Hovinga, Urs; van Enckevort, Stina-Leena; Enkling, Norbert; Katsoulis, Joannis; Mericske, Regina (2013). Sinus floor elevation: comparison of the presurgical ridge height of different techniques - a retrospective analysis. e-Journal of Dentistry, 4(4), pp. 485-494. e-Journal of Dentistry

2012

Enkling, Norbert; Bayer, Stefan; Jöhren, Peter; Mericske, Regina (2012). Vinylsiloxanether: a new impression material. Clinical study of implant impressions with vinylsiloxanether versus polyether materials. Clinical implant dentistry and related research, 14(1), pp. 144-51. Oxford: Blackwell 10.1111/j.1708-8208.2009.00240.x

1996

Merz, B.; Mericske-Stern, Regina; Lengsfeld, M.; Schmitt, J. (1996). Dreidimensionales FE-Modell eines zahnlosen, mit Implantaten versorgen Unterkiefers. Biomedizinische Technik / Biomedical engineering, 41(s1), pp. 34-35. Walter de Gruyter 10.1515/bmte.1996.41.s1.34

This list was generated on Sun Mar 3 02:34:14 2024 CET.
Provide Feedback