 | Up a level |
Çakmak, Gülce; Cuellar, Alfonso Rodriguez; Donmez, Mustafa Borga; Abou-Ayash, Samir; Lu, Wei-En; Schimmel, Martin; Yilmaz, Burak (2024). Effect of printing layer thickness on the trueness of 3-unit interim fixed partial dentures. The journal of prosthetic dentistry, 131(4), pp. 718-725. Elsevier 10.1016/j.prosdent.2022.04.015
Azpiazu-Flores, Francisco X; Donmez, Mustafa Borga; Lin, Wei-Shao; Morton, Dean; Yilmaz, Burak (2024). Verifying the seating of a 3D-printed removable die using elastomeric matrices: A dental technique. (In Press). Journal of prosthodontics Wiley 10.1111/jopr.13839
Çakmak, Gülce; Donmez, Mustafa Borga; Yılmaz, Deniz; Yoon, Hyung-In; Kahveci, Çiğdem; Abou-Ayash, Samir; Yilmaz, Burak (2024). Fabrication trueness and margin quality of additively manufactured resin-based definitive laminate veneers with different restoration thicknesses. (In Press). Journal of dentistry, 144, p. 104941. Elsevier 10.1016/j.jdent.2024.104941
Yilmaz, Burak; Gouveia, Diogo; Schimmel, Martin; Lu, Wei-En; Özcan, Mutlu; Abou-Ayash, Samir (2024). Effect of adhesive system, resin cement, heat-pressing technique, and thermomechanical aging on the adhesion between titanium base and a high-performance polymer. The journal of prosthetic dentistry, 131(3), pp. 468-474. Elsevier 10.1016/j.prosdent.2022.03.026
Çakmak, Gülce; Weber, Franziska Alexandra; Donmez, Mustafa Borga; Kahveci, Çiğdem; Schimmel, Martin; Yilmaz, Burak (2024). Effect of coffee thermocycling on the surface roughness and stainability of denture base materials with different chemical compositions manufactured with additive and subtractive technologies. Journal of esthetic and restorative dentistry, 36(3), pp. 453-459. Wiley 10.1111/jerd.13136
Sasany, Rafat; Donmez, Mustafa Borga; de Paula, Marcella Silva; Kahveci, Çiğdem; Ceylan, Gözlem; Yilmaz, Burak; Çakmak, Gülce (2024). Stainability and translucency of potassium aluminum sulfate applied computer-aided design and computer-aided manufacturing materials after coffee thermocycling. Journal of esthetic and restorative dentistry, 36(3), pp. 477-483. Wiley 10.1111/jerd.13154
Molinero-Mourelle, Pedro; Abou-Ayash, Samir; Brägger, Urs; Schimmel, Martin; Özcan, Mutlu; Yilmaz, Burak; Buser, Ramona; Al-Haj Husain, Nadin (2024). Load bearing capacity of 3-unit screw-retained implant-supported fixed dental prostheses with a mesial and distal cantilever on a single implant: A comparative in vitro study. Journal of the mechanical behavior of biomedical materials, 151, p. 106395. Elsevier 10.1016/j.jmbbm.2024.106395
Çakmak, Gülce; Chebaro, Jad; Donmez, Mustafa Borga; Yılmaz, Deniz; Yoon, Hyung-In; Kahveci, Çiğdem; Schimmel, Martin; Yilmaz, Burak (2024). Influence of intraoral scanner and finish line location on the fabrication trueness and margin quality of additively manufactured laminate veneers fabricated with a completely digital workflow. The journal of prosthetic dentistry, 131(2), 313.e1-313.e9. Elsevier 10.1016/j.prosdent.2023.10.026
Jo, Ye-Hyeon; Cho, Jun-Ho; Park, Dong Hyun; Yoon, Hyung-In; Han, Seung Hyun; Yilmaz, Burak (2024). Antimicrobial activity, surface properties, and cytotoxicity of microencapsulated phytochemicals incorporated into three-dimensionally printable dental polymers. Journal of dentistry, 141(104820), p. 104820. Elsevier Science 10.1016/j.jdent.2023.104820
Cho, Jun-Ho; Çakmak, Gülce; Yi, Yuseung; Yoon, Hyung-In; Yilmaz, Burak; Schimmel, Martin (2024). Tooth morphology, internal fit, occlusion, and proximal contacts of dental crowns designed by deep learning-based dental software: A comparative study. Journal of dentistry, 141(104830), p. 104830. Elsevier Science 10.1016/j.jdent.2023.104830
Donmez, Mustafa Borga; Çakmak, Gülce; Schimmel, Martin; Yilmaz, Burak (2024). Implementation of triple-scan protocol to evaluate the fit of complete-arch implant-supported fixed prostheses. (In Press). Journal of prosthodontics Wiley 10.1111/jopr.13830
Yilmaz, Hakan; Arınç, Hakan; Çakmak, Gülce; Atalay, Sevda; Donmez, Mustafa Borga; Kökat, Ali Murat; Yilmaz, Burak (2024). Effect of scan pattern on the scan accuracy of a combined healing abutment scan body system. The journal of prosthetic dentistry, 131(1), pp. 110-118. Elsevier 10.1016/j.prosdent.2022.01.018
Çakmak, Gülce; Cuellar, Alfonso Rodriguez; Treviño Santos, Alejandro; Johnston, William M; Dönmez, Mustafa Borga; Yilmaz, Burak (2024). Color and translucency of milled polymethyl methacrylate crowns on non-tooth-colored interim abutments with different surface treatments. The journal of prosthetic dentistry, 131(1), pp. 102-109. Elsevier 10.1016/j.prosdent.2022.01.005
Guirao, Sergi; Llansana, Ferran; Button, Heather; Yilmaz, Burak; Kois, John C; Revilla-León, Marta (2023). Additively manufactured devices with varying designs and sizes for acquiring initial intraoral implant scans. Journal of prosthodontics, 32(S2), pp. 181-185. Wiley 10.1111/jopr.13750
Revilla-León, Marta; Lanis, Alejandro; Yilmaz, Burak; Kois, John C; Gallucci, German O (2023). Intraoral digital implant scans: Parameters to improve accuracy. Journal of prosthodontics, 32(S2), pp. 150-164. Wiley 10.1111/jopr.13749
Donmez, Mustafa Borga; Güven, Mehmet Esad; Yılmaz, Deniz; Abou-Ayash, Samir; Çakmak, Gülce; Yilmaz, Burak (2023). Trueness and precision of combined healing abutment scan body system scans at different sites of maxilla after multiple repositioning of the scan body. Journal of dentistry, 139, p. 104716. Elsevier 10.1016/j.jdent.2023.104716
Donmez, Mustafa Borga; Gómez-Polo, Miguel; Çakmak, Gülce; Yilmaz, Burak; Revilla-León, Marta (2023). Influence of implant scan body design (height, diameter, geometry, material, and retention system) on intraoral scanning accuracy: A systematic review. Journal of prosthodontics, 32(S2), pp. 165-180. Wiley 10.1111/jopr.13774
Sisli, S N; Gul, -Ates E; Ozcelik, T B; Yilmaz, B; Revilla-León, M (2023). Survival of root canal-treated teeth adjacent to an implant: a retrospective case-control study. Journal of dentistry, 139, p. 104742. Elsevier Science 10.1016/j.jdent.2023.104742
Çakmak, Gülce; Watson Asadolahi, Nura; Schimmel, Martin; Molinero Mourelle, Pedro; Akay, Canan; Donmez, Mustafa Borga; Yilmaz, Burak (2023). Effect of coffee thermal cycling on the surface properties and stainability of additively manufactured denture base resins in different layer thicknesses. (In Press). Journal of prosthodontics Wiley 10.1111/jopr.13803
Raabe, Clemens; Abou-Ayash, Samir; Yilmaz, Burak; Surbek, Fiona Jennifer; Chappuis, Vivianne; Couso Queiruga, Emilio (2023). Positional accuracy during the sequence of static computer-assisted implant surgery in three alveolar ridge morphologies: an in vitro study. (In Press). Journal of prosthodontics Wiley 10.1111/jopr.13798
Çakmak, Gülce; Donmez, Mustafa Borga; Silva de Paula, Marcella; Akay, Canan; Fonseca, Manrique; Kahveci, Çiğdem; Abou-Ayash, Samir; Yilmaz, Burak (2023). Surface roughness, optical properties, and microhardness of additively and subtractively manufactured CAD-CAM materials after brushing and coffee thermal cycling. (In Press). Journal of prosthodontics Wiley 10.1111/jopr.13796
Yilmaz, Burak; Guo, Xiaohan; Schimmel, Martin; Abou-Ayash, Samir (2023). Effect of industrial scanner and framework material interaction on the marginal gaps of CAD-CAM complete-arch implant frameworks. The journal of prosthetic dentistry, 130(5), pp. 723-730. Elsevier 10.1016/j.prosdent.2021.10.013
Atalay, Sevda; Çakmak, Gülce; Fonseca, Manrique; Schimmel, Martin; Yilmaz, Burak (2023). Effect of different disinfection protocols on the surface properties of CAD-CAM denture base materials. The journal of prosthetic dentistry, 130(5), pp. 787-795. Elsevier 10.1016/j.prosdent.2021.12.007
Çakmak, Gülce; Güven, Mehmet Esad; Donmez, Mustafa Borga; Kahveci, Çiğdem; Schimmel, Martin; Abou-Ayash, Samir; Yilmaz, Burak (2023). Effect of internal connection type and screw channel angle on the screw stability of anterior implant-supported zirconia crowns. Clinical oral implants research, 34(11), pp. 1248-1256. Wiley-Blackwell 10.1111/clr.14165
Yilmaz, Burak; Dede, Doğu Ömür; Donmez, Mustafa Borga; Küçükekenci, Ahmet Serkan; Lu, Wei-En; Schumacher, Fernanda; Çakmak, Gülce (2023). Comparison of intraoral and laboratory scanners to an industrial-grade scanner while analyzing the fabrication trueness of polymer and titanium complete-arch implant-supported frameworks. Journal of dentistry, 138, p. 104697. Elsevier 10.1016/j.jdent.2023.104697
Donmez, Mustafa Borga; Çakmak, Gülce; Dede, Doğu Ömür; Küçükekenci, Ahmet Serkan; Lu, Wei-En; Schumacher, Fernanda; Revilla-León, Marta; Yilmaz, Burak (2023). Effect of scan powder and scanning technology on measured deviations of complete-arch implant supported frameworks digitized with industrial and intraoral scanners. Journal of dentistry, 138, p. 104736. Elsevier Science 10.1016/j.jdent.2023.104736
Cho, Jun-Ho; Yi, Yuseung; Choi, Jinhyeok; Ahn, Junseong; Yoon, Hyung-In; Yilmaz, Burak (2023). Time efficiency, occlusal morphology, and internal fit of anatomic contour crowns designed by dental software powered by generative adversarial network: A comparative study. Journal of dentistry, 138, p. 104739. Elsevier Science 10.1016/j.jdent.2023.104739
Revilla-León, Marta; Barmak, Abdul B; Tohme, Hani; Yilmaz, Burak; Kois, John C; Gómez-Polo, Miguel (2023). Factors that influence the accuracy of maxillomandibular relationship at maximum intercuspation acquired by using intraoral scanners: A systematic review. Journal of dentistry, 138(104718), p. 104718. Elsevier 10.1016/j.jdent.2023.104718
Fonseca, Manrique; Molinero-Mourelle, Pedro; Donmez, Mustafa Borga; Abou-Ayash, Samir; Buser, Daniel; Sculean, Anton; Yilmaz, Burak (2023). Management of compromised spacing in the esthetic zone by combining an ultra-thin partial ceramic veneer and a ceramic implant crown: a case report of a multi-disciplinary approach and technique description (In Press). International journal of periodontics & restorative dentistry Quintessence Publ. 10.11607/prd.6626
Azpiazu-Flores, Francisco X; Johnston, William M; Mata-Mata, Severino J; Yilmaz, Burak (2023). Positional trueness of three removable die designs with different root geometries manufactured using stereolithographic 3D printing. (In Press). The journal of prosthetic dentistry Elsevier 10.1016/j.prosdent.2023.08.036
Kois, John C; Zeitler, Jonathan M; Barmak, Abdul B; Yilmaz, Burak; Gómez-Polo, Miguel; Revilla-León, Marta (2023). Discrepancies in the occlusal devices designed by an experienced dental laboratory technician and by 2 artificial intelligence-based automatic programs. (In Press). The journal of prosthetic dentistry Elsevier 10.1016/j.prosdent.2023.08.015
Ciftci, Gozde; Somay, Suphi Deniz; Ozcan, Işıl; Ozcelik, Tuncer Burak; Yilmaz, Burak (2023). Prosthetic complications with mandibular bar-retained implant overdentures having distal attachments and metal frameworks: A 2- to 12-year retrospective analysis. The journal of prosthetic dentistry, 130(4), pp. 573-580. Elsevier 10.1016/j.prosdent.2021.11.016
Lee, Won-Jun; Jo, Ye-Hyeon; Yilmaz, Burak; Yoon, Hyung-In (2023). Effect of build angle, resin layer thickness, and resin viscosity on the surface properties and microbial adhesion of denture bases manufactured by using digital light processing. Journal of dentistry, 137, p. 104608. Elsevier 10.1016/j.jdent.2023.104608
Yilmaz, Burak; Dede, Doğu Ömür; Diker, Emre; Fonseca, Manrique; Johnston, William Michael; Küçükekenci, Ahmet Serkan (2023). Effect of cross-polarization filters on the trueness of colors obtained with a single-lens reflex camera, macro lens, and a ring flash. Journal of esthetic and restorative dentistry, 35(6), pp. 878-885. Wiley 10.1111/jerd.13053
Çakmak, Gülce; Hess, Julia Anouk; Donmez, Mustafa Borga; Yılmaz, Deniz; Alhotan, Abdulaziz; Schimmel, Martin; Peutzfeldt, Anne; Yilmaz, Burak (2023). Effect of polishing and denture cleansers on the surface roughness of new-generation denture base materials and their color change after cleansing. (In Press). Journal of prosthodontics Wiley 10.1111/jopr.13755
Dede, Doğu Ömür; Çakmak, Gülce; Donmez, Mustafa Borga; Küçükekenci, Ahmet Serkan; Lu, Wei-En; Ni, Andy Ai; Yilmaz, Burak (2023). Effect of analysis software program on measured deviations in complete arch, implant-supported framework scans. (In Press). The journal of prosthetic dentistry Elsevier 10.1016/j.prosdent.2023.06.028
Alshahrani, Faris A; Gad, Mohammed M; Al-Thobity, Ahmad M; Akhtar, Sultan; Kashkari, Afnan; Alzoubi, Fawaz; Yilmaz, Burak (2023). Effect of treated zirconium dioxide nanoparticles on the flexural properties of autopolymerized resin for interim fixed restorations: An in vitro study. The journal of prosthetic dentistry, 130(2), pp. 257-264. Elsevier 10.1016/j.prosdent.2021.09.031
Sasany, Rafat; Yilmaz, Burak (2023). Marginal discrepancy and fracture load of thermomechanically fatigued crowns fabricated with different CAD-CAM techniques. Journal of prosthodontics, 32(7), pp. 602-607. Wiley 10.1111/jopr.13612
Revilla-León, Marta; Yilmaz, Burak; Kois, John C; Att, Wael (2023). Prevention of peri-implant disease in edentulous patients with fixed implant rehabilitations. Clinical implant dentistry and related research, 25(4), pp. 743-751. Wiley 10.1111/cid.13182
Lee, Won-Jun; Jo, Ye-Hyeon; Yilmaz, Burak; Yoon, Hyung-In (2023). Effect of layer thickness, build angle, and viscosity on the mechanical properties and manufacturing trueness of denture base resin for digital light processing. Journal of dentistry, 135, p. 104598. Elsevier Science 10.1016/j.jdent.2023.104598
Cho, Jun-Ho; Çakmak Alp, Gülce; Yilmaz, Burak; Yoon, Hyung-In (2023). Effect of CAD-CAM restorative materials and scanning aid conditions on the accuracy and time efficiency of intraoral scans. Journal of prosthodontics, 32(7), pp. 608-615. Wiley 10.1111/jopr.13727
Couso Queiruga, Emilio; Spörri, Livia A; P Sabatini, Gabriela; Chappuis, Vivianne; Abou-Ayash, Samir; Yilmaz, Burak; Raabe, Clemens (2023). Accuracy of implant placement in the posterior maxillary region depending on the alveolar residual bone height and sinus morphology: An in vitro study. (In Press). Clinical oral implants research Wiley-Blackwell 10.1111/clr.14142
Han, Sangjun; Yi, Yuseung; Revilla-León, Marta; Yilmaz, Burak; Yoon, Hyung-In (2023). Feasibility of software-based assessment for automated evaluation of tooth preparation for dental crown by using a computational geometric algorithm. Scientific Reports, 13(1), p. 11847. Nature Publishing Group 10.1038/s41598-023-39089-3
Çakmak, Gülce; Oosterveen-Rüegsegger, Alice Lisa; Akay, Canan; Schimmel, Martin; Yilmaz, Burak; Donmez, Mustafa Borga (2023). Influence of polishing technique and coffee thermal cycling on the surface roughness and color stability of additively and subtractively manufactured resins used for definitive restorations. (In Press). Journal of prosthodontics Wiley 10.1111/jopr.13730
Çakmak, Gülce; Jutzi, Dino; Donmez, Mustafa Borga; Kahveci, Çiğdem; de Paula, Marcella Silve; Schimmel, Martin; Yilmaz, Burak (2023). Effect of number of supports and build angle on the fabrication and internal fit accuracy of additively manufactured definitive resin-ceramic hybrid crowns. Journal of dentistry, 134(104548), p. 104548. Elsevier Science 10.1016/j.jdent.2023.104548
Revilla-León, Marta; Gómez-Polo, Miguel; Barmak, Abdul B; Kois, John C; Yilmaz, Burak; Alonso Pérez-Barquero, Jorge (2023). Influence of occlusal collision corrections completed by two intraoral scanners or a dental design program on the accuracy of the maxillomandibular relationship. (In Press). The journal of prosthetic dentistry Elsevier 10.1016/j.prosdent.2023.05.015
Wittneben, Julia-Gabriela; Yilmaz, Burak; Wismeijer, Daniel; Shahdad, Shakeel; Brägger, Urs; Abou-Ayash, Samir (2023). Patient-reported outcome measures focusing on the esthetics of implant-compared to tooth-supported single crowns-A systematic review and meta-analysis. Journal of esthetic and restorative dentistry, 35(4), pp. 632-645. Wiley 10.1111/jerd.12983
Niemeyer, Samira Helena; Maniewicz, Sabrina; Campus, Guglielmo; Tennert, Christian; Yilmaz, Burak; Zekeridou, Alkisti; Roccuzzo, Andrea; Esteves-Oliveira, Marcella; Carvalho, Thiago S; Wierichs, Richard Johannes (2023). Design, development and validation of a questionnaire to assess dentists' knowledge and experience in diagnosing, recording, and managing root caries. Clinical oral investigations, 27(6), pp. 2705-2711. Springer 10.1007/s00784-022-04842-x
Donmez, Mustafa Borga; Mathey, Ayse; Gäumann, Fabio; Mathey, Amber; Yilmaz, Burak; Abou-Ayash, Samir (2023). Effect of intraoral scanner and fixed partial denture situation on the scan accuracy of multiple implants: An in vitro study. Clinical implant dentistry and related research, 25(3), pp. 502-510. Wiley 10.1111/cid.13190
Donmez, Mustafa Borga; Çakmak, Gülce; Yılmaz, Deniz; Schimmel, Martin; Abou-Ayash, Samir; Yilmaz, Burak; Peutzfeldt, Anne (2023). Bond strength of additively manufactured composite resins to dentin and titanium when bonded with dual-polymerizing resin cements. (In Press). The journal of prosthetic dentistry Elsevier 10.1016/j.prosdent.2023.04.003
Cevik, Pinar; Akca, Gulcin; Asar, Neset Volkan; Avci, Emine; Kiat-Amnuay, Sudarat; Yilmaz, Burak (2023). Antimicrobial effects of nano titanium dioxide and disinfectants on maxillofacial silicones. (In Press). The journal of prosthetic dentistry Elsevier 10.1016/j.prosdent.2023.03.001
Di Fiore, Adolfo; Granata, Stefano; Monaco, Carlo; Stellini, Edoardo; Yilmaz, Burak (2023). Clinical performance of posterior monolithic zirconia implant-supported fixed dental prostheses with angulated screw channels: A 3-year prospective cohort study. The journal of prosthetic dentistry, 129(4), pp. 566-572. Elsevier 10.1016/j.prosdent.2021.06.043
Raabe, Clemens; Dulla, Fabrice Alain; Yilmaz, Burak; Chappuis, Vivianne; Abou-Ayash, Samir (2023). Influence of Drilling Sequence and Guide-hole Design on the Accuracy of static Computer-Assisted Implant Surgery in Extraction Sockets and Healed Sites - An In Vitro Investigation. Clinical oral implants research, 34(4), pp. 320-329. Wiley-Blackwell 10.1111/clr.14042
Diker, Emre; Terzioglu, Hakan; Gouveia, Diogo N M; Donmez, Mustafa Borga; Seidt, Jeremy; Yilmaz, Burak (2023). Effect of material type, torque value, and sterilization on linear displacements of a scan body: An in vitro study. Clinical implant dentistry and related research, 25(2), pp. 419-425. Wiley 10.1111/cid.13187
Çakmak, Gülce; Donmez, Mustafa-Borga; Akay, Canan; Abou-Ayash, Samir; Schimmel, Martin; Yilmaz, Burak (2023). Effect of thermal cycling on the flexural strength and hardness of new-generation denture base materials. Journal of prosthodontics, 32(S1), pp. 81-86. Wiley 10.1111/jopr.13615
Maneiro Lojo, Jesús; Alonso Pérez-Barquero, Jorge; García-Sala Bonmatí, Fernando; Agustín-Panadero, Rubén; Yilmaz, Burak; Revilla-León, Marta (2023). Influence of print orientation on the accuracy (trueness and precision) of diagnostic casts manufactured with a daylight polymer printer. (In Press). The journal of prosthetic dentistry Elsevier 10.1016/j.prosdent.2023.01.033
Donmez, Mustafa Borga; Mathey, Ayse; Gäumann, Fabio; Mathey, Amber; Yilmaz, Burak; Abou-Ayash, Samir (2023). Scan accuracy and time efficiency of different implant-supported fixed partial denture situations depending on the intraoral scanner and scanned area: An in vitro study. (In Press). The journal of prosthetic dentistry Elsevier 10.1016/j.prosdent.2023.01.029
Cakmak, Gülce; Subaşı, Meryem Gülce; Sert, Murat; Yilmaz, Burak (2023). Effect of surface treatments on wear and surface properties of different CAD-CAM materials and their enamel antagonists. The journal of prosthetic dentistry, 129(3), pp. 495-506. Elsevier 10.1016/j.prosdent.2021.06.023
Çakmak, Gülce; Donmez, Mustafa Borga; Akay, Canan; de Silva, Marcella Paula; Mangano, Francesco Guido; Abou-Ayash, Samir; Yilmaz, Burak (2023). Effect of measurement techniques and operators on measured deviations in digital implant scans. Journal of dentistry, 130(104388), p. 104388. Elsevier Science 10.1016/j.jdent.2022.104388
Dulla, Fabrice Alain; Couso-Queiruga, Emilio; Chappuis, Vivianne; Yilmaz, Burak; Abou-Ayash, Samir; Raabe, Clemens (2023). Influence of Alveolar Ridge Morphology and Guide-hole Design on the Accuracy of Static Computer-Assisted Implant Surgery with two Implant Macro-designs: An in Vitro Study. Journal of dentistry, 130(104426), p. 104426. Elsevier Science 10.1016/j.jdent.2023.104426
Donmez, Mustafa Borga; Yilmaz, Burak; Yoon, Hyung-In; Kahveci, Çiğdem; Schimmel, Martin; Çakmak, Gülce (2023). Effect of computer-aided design and computer-aided manufacturing technique on the accuracy of fixed partial denture patterns used for casting or pressing. Journal of dentistry, 130(104434), p. 104434. Elsevier Science 10.1016/j.jdent.2023.104434
Çakmak, Gülce; Herren, Kira Vera; Donmez, Mustafa Borga; Kahveci, Çiğdem; Schimmel, Martin; Yilmaz, Burak (2023). Effect of coffee thermocycling on the surface roughness and stainability of nanographene-reinforced polymethyl methacrylate used for fixed definitive prostheses. The journal of prosthetic dentistry, 129(3), 507.e1-507.e6. Elsevier 10.1016/j.prosdent.2022.12.009
Jamjoom, Faris Z; Aldghim, Adhwaa; Aldibasi, Omar; Yilmaz, Burak (2023). Impact of intraoral scanner, scanning strategy, and scanned arch on the scan accuracy of edentulous arches: An in vitro study. (In Press). The journal of prosthetic dentistry Elsevier 10.1016/j.prosdent.2023.01.027
Raabe, Clemens; Schuetz, Tabea S; Chappuis, Vivianne; Yilmaz, Burak; Abou-Ayash, Samir; Couso-Queiruga, Emilio (2023). Accuracy of keyless vs drill-key implant systems for static computer-assisted implant surgery using two guide-hole designs compared to freehand implant placement: an in vitro study. International journal of implant dentistry, 9(1), p. 4. Springer 10.1186/s40729-023-00470-6
Saponaro, Paola C; Karasan, Duygu; Donmez, Mustafa Borga; Johnston, William Michael; Yilmaz, Burak (2023). Prosthetic complications with monolithic or micro-veneered implant-supported zirconia single-unit, multiple-unit, and complete-arch prostheses on titanium base abutments: A single center retrospective study with mean follow-up period of 72.35 months. Clinical implant dentistry and related research, 25(1), pp. 99-106. Wiley 10.1111/cid.13149
Fonseca, Manrique; Molinero-Mourelle, Pedro; Donmez, Mustafa Borga; Janner, Simone Francesco; Yilmaz, Burak (2023). Interim rehabilitation of an edentulous situation with an overdenture retained by short implants during a staged vertical and horizontal ridge augmentation: a dental technique. Quintessence international, 54(4), pp. 296-300. Quintessenz Verlags-GmbH 10.3290/j.qi.b3857201
Yeager, Brandon; Çakmak, Gülce; Zheng, Fengyun; Johnston, William Michael; Yilmaz, Burak (2023). Error analysis of stages involved in CBCT-guided implant placement with surgical guides when different printing technologies are used. (In Press). The journal of prosthetic dentistry Elsevier 10.1016/j.prosdent.2022.11.018
Revilla-León, Marta; Agustín-Panadero, Rubén; Zeitler, Jonathan M; Barmak, Abdul B; Yilmaz, Burak; Kois, John C; Pérez-Barquero, Jorge Alonso (2023). Differences in maxillomandibular relationship recorded at centric relation when using a conventional method, four intraoral scanners, and a jaw tracking system: A clinical study. (In Press). The journal of prosthetic dentistry Elsevier 10.1016/j.prosdent.2022.12.007
Abou-Ayash, Samir; Mathey, Amber; Gäumann, Fabio; Mathey, Ayse; Donmez, Mustafa Borga; Yilmaz, Burak (2023). Erratum to 'In vitro scan accuracy and time efficiency in various implant-supported fixed partial denture situations' [Journal of Dentistry 127C (2022) 104358]. Journal of dentistry, 128(104383), p. 104383. Elsevier Science 10.1016/j.jdent.2022.104383
Yilmaz, Burak; Alsaery, Amani; Bowen, Luke; Abou-Ayash, Samir; Seghi, Robert (2023). Influence of cyclic loading on load-to-failure of different ceramic CAD-CAM implant-supported single crowns. The international journal of prosthodontics, 36(1), 42–48. Quintessence Publishing 10.11607/ijp.6510
Akay, Canan; Çakmak, Gülce; Donmez, Mustafa Borga; Abou-Ayash, Samir; Mumcu, Emre; Pat, Suat; Yilmaz, Burak (2023). Flexural Strength and Vickers Microhardness of Graphene-Doped SnO2 Thin-Film-Coated Polymethylmethacrylate after Thermocycling. Coatings, 13(6), p. 1106. MDPI 10.3390/coatings13061106
Güven, Mehmet Esad; Çakmak, Gülce; Dönmez, Mustafa Borga; Yilmaz, Burak (2023). Evaluation of Dimensional Stability and Occlusal Wear of Additively and Subtractively Manufactured Resin-Based Crowns after Thermomechanical Aging. Applied Sciences, 13(21), p. 11849. MDPI 10.3390/app132111849
Çakmak, Gülce; Rusa, Ana Maria; Donmez, Mustafa Borga; Akay, Canan; Kahveci, Çiğdem; Schimmel, Martin; Yilmaz, Burak (2022). Trueness of crowns fabricated by using additively and subtractively manufactured resin-based CAD-CAM materials. (In Press). The journal of prosthetic dentistry Elsevier 10.1016/j.prosdent.2022.10.012
Fonseca, Manrique; Molinero-Mourelle, Pedro; Buser, Ramona; Yilmaz, Burak; Schimmel, Martin (2022). Fabrication of an implant-retained overdenture with ceramic crowns cemented on a polyetherketoneketone framework: A clinical report. The journal of prosthetic dentistry, 128(6), pp. 1152-1157. Elsevier 10.1016/j.prosdent.2021.04.001
Yilmaz, Burak; Gouveia, Diogo; Seghi, Robert; Johnston, William; Lang, Lisa A (2022). Effect of crown height on the screw joint stability of zirconia screw-retained crowns. The journal of prosthetic dentistry, 128(6), pp. 1328-1334. Elsevier 10.1016/j.prosdent.2021.02.027
Mata-Mata, Severino J; Donmez, Mustafa Borga; Meirelles, Luiz; Johnston, William Michael; Yilmaz, Burak (2022). Influence of digital implant analog design on the positional trueness of an analog in additively manufactured models: An in-vitro study. Clinical implant dentistry and related research, 24(6), pp. 821-830. Wiley 10.1111/cid.13137
Abou-Ayash, Samir; Mathey, Amber; Gäumann, Fabio; Mathey, Ayse; Donmez, Mustafa Borga; Yilmaz, Burak (2022). In vitro scan accuracy and time efficiency in various implant-supported fixed partial denture situations. Journal of dentistry, 127, p. 104358. Elsevier 10.1016/j.jdent.2022.104358
Yilmaz, Burak; Donmez, Mustafa Borga; Kahveci, Çiğdem; Cuellar, Alfonso Rodrigues; Silva de Paula, Marcella; Schimmel, Martin; Abou-Ayash, Samir; Çakmak, Gülce (2022). Effect of printing layer thickness on the trueness and fit of additively manufactured removable dies. The journal of prosthetic dentistry, 128(6), 1318.e1-1318.e9. Elsevier 10.1016/j.prosdent.2022.10.011
Ozan, Oğuz; Şeker, Emre; Cakmak, Gülce; Guo, Xiaohan; Yilmaz, Burak (2022). Effect of guide sleeve material, region, diameter, and number of times drills were used on the material loss from sleeves and drills used for surgical guides: An in vitro study. The journal of prosthetic dentistry, 128(4), pp. 746-753. Elsevier 10.1016/j.prosdent.2020.12.036
Cintra Mailart, Mariane; Berli, Pavel Claudio; Borges, Alessandra Bühler; Yilmaz, Burak; Baumann, Tommy; Saads Carvalho, Thiago (2022). Pellicle modification with natural bioproducts: Influence on tooth color under erosive conditions. European journal of oral sciences, 130(5), e12886. Wiley-Blackwell 10.1111/eos.12886
Molinero-Mourelle, Pedro; Bischof, Frank; Yilmaz, Burak; Schimmel, Martin; Abou-Ayash, Samir (2022). Clinical performance of tooth implant-supported removable partial dentures: a systematic review and meta-analysis. Clinical oral investigations, 26(10), pp. 6003-6014. Springer-Verlag 10.1007/s00784-022-04622-7
Çakmak, Gülce; Donmez, Mustafa Borga; Akay, Canan; Atalay, Sevda; Silva de Paula, Marcella; Schimmel, Martin; Yilmaz, Burak (2022). Effect of simulated brushing and disinfection on the surface roughness and color stability of CAD-CAM denture base materials. Journal of the mechanical behavior of biomedical materials, 134, p. 105390. Elsevier 10.1016/j.jmbbm.2022.105390
Çakmak, Gülce; Molinero-Mourelle, Pedro; Silva de Paula, Marcella; Akay, Canan; Cuellar, Alfonso Rodriguez; Donmez, Mustafa Borga; Yilmaz, Burak (2022). Surface Roughness and Color Stability of 3D-Printed Denture Base Materials after Simulated Brushing and Thermocycling. Materials, 15(18) Molecular Diversity Preservation International MDPI 10.3390/ma15186441
Mulla, Salah H.; Seghi, Robert R.; Johnston, William M,; Yilmaz, Burak (2022). Effect of cyclic loading on reverse torque values of angled screw channel systems. The journal of prosthetic dentistry, 128(3), pp. 458-466. Elsevier 10.1016/j.prosdent.2020.12.020
Durkan, Rukiye; Deste Gökay, Gonca; Şimşek, Hatice; Yilmaz, Burak (2022). Biaxial flexural strength and phase transformation characteristics of dental monolithic zirconia ceramics with different sintering durations: An in vitro study. The journal of prosthetic dentistry, 128(3), pp. 498-504. Elsevier 10.1016/j.prosdent.2021.04.003
Ozkir, Serhat Emre; Bicer, Mehmet; Deste, Gonca; Karakus, Elif; Yilmaz, Burak (2022). Wear of monolithic zirconia against different CAD-CAM and indirect restorative materials. The journal of prosthetic dentistry, 128(3), pp. 505-511. Elsevier 10.1016/j.prosdent.2021.03.023
Halis, Gizem; Köroğlu, Ayşegül; Şahin, Onur; Dede, Doğu Ömür; Yilmaz, Burak (2022). Effect of simulated tootbrushing on surface roughness of sealant agent coupled nanohybrid composite resins. Journal of esthetic and restorative dentistry, 34(6), pp. 907-914. Wiley 10.1111/jerd.12871
Gouveia, Diogo; Yilmaz, Burak; Cevik, Pinar; Johnston, William Michael (2022). Using Kubelka-Munk reflectance theory to predict optimal pink composite thickness and shade with an opaqued PEEK background for a final gingival color: An in vitro study. Dental materials, 38(9), pp. 1452-1458. Elsevier 10.1016/j.dental.2022.06.027
Çakmak, Gülce; Donmez, Mustafa Borga; Cuellar, Alfonso Rodrigues; Kahveci, Çiğdem; Schimmel, Martin; Yilmaz, Burak (2022). Additive or subtractive manufacturing of crown patterns used for pressing or casting: a trueness analysis. Journal of dentistry, 124, p. 104221. Elsevier 10.1016/j.jdent.2022.104221
Donmez, Mustafa Borga; Çakmak, Gülce; Atalay, Sevda; Yilmaz, Hakan; Yilmaz, Burak (2022). Trueness and precision of combined healing abutment-scan body system depending on the scan pattern and implant location: an in-vitro study. Journal of dentistry, 124, p. 104169. Elsevier Science 10.1016/j.jdent.2022.104169
Molinero-Mourelle, Pedro; Roccuzzo, Andrea; Yilmaz, Burak; Lam, Walter Yu Hang; Pow, Edmond H N; Del Río Highsmith, Jaime; Gómez-Polo, Miguel (2022). Microleakage assessment of CAD-CAM Cobalt-Chrome and Zirconia abutments on a conical connection dental implant: A comparative in vitro study. Clinical oral implants research, 33(9), pp. 945-952. Wiley-Blackwell 10.1111/clr.13973
Köroğlu, Ayşegül; Şahin, Onur; Küçükekenci, Ahmet Serkan; Dede, Doğu Ömür; Yıldırım, Hüsniye; Yilmaz, Burak (2022). Influences of Toothbrushing and Different Toothpastes on the Surface Roughness and Color Stability of Interim Prosthodontic Materials. Materials, 15(17) Molecular Diversity Preservation International MDPI 10.3390/ma15175831
Çakmak, Gülce; Donmez, Mustafa Borga; Atalay, Sevda; Silva de Paula, Marcella; Fonseca, Manrique; Schimmel, Martin; Yilmaz, Burak (2022). Surface roughness and stainability of CAD-CAM denture base materials after simulated brushing and coffee thermocycling. (In Press). The journal of prosthetic dentistry Elsevier 10.1016/j.prosdent.2022.06.006
Di Fiore, Adolfo; Montagner, Mattia; Sivolella, Stefano; Stellini, Edoardo; Yilmaz, Burak; Brunello, Giulia (2022). Peri-Implant Bone Loss and Overload: A Systematic Review Focusing on Occlusal Analysis through Digital and Analogic Methods. Journal of clinical medicine, 11(16) MDPI 10.3390/jcm11164812
Fonseca, Manrique; Haro-Adanez, Mireia; Pieralli, Stefano; Bresavscek, Miha; Yilmaz, Burak; Att, Wael (2022). Short versus regular-length implants to rehabilitate partially edentulous mandible: a 2-year prospective split-mouth clinical study. Journal of oral implantology, 48(4), pp. 277-284. American Association of Implant Dentistry 10.1563/aaid-joi-D-20-00315
Subaşı, Meryem Gülce; Çakmak, Gülce; Sert, Murat; Yilmaz, Burak (2022). Effect of multiple firings on surface roughness and flexural strength of CAD-CAM ceramics. The journal of prosthetic dentistry, 128(2), 216.e1-216.e8. Elsevier 10.1016/j.prosdent.2022.05.021
Carneiro Pereira, Ana Larisse; Medeiros, Vitória Ramos; Campos, Maria de Fátima Trindade Pinto; de Medeiros, Annie Karoline Bezerra; Yilmaz, Burak; Carreiro, Adriana da Fonte Porto (2022). Conventional and digital impressions for complete-arch implant-supported fixed prostheses: time, implant quantity effect and patient satisfaction. The journal of advanced prosthodontics, 14(4), pp. 212-222. Korean Academy of Prosthodontics 10.4047/jap.2022.14.4.212
Di Fiore, Adolfo; Meneghello, Roberto; Brun, Paola; Rosso, Stefano; Gattazzo, Alberto; Stellini, Edoardo; Yilmaz, Burak (2022). Comparison of the flexural and surface properties of milled, 3D-printed, and heat polymerized PMMA resins for denture bases: an in vitro study. Journal of prosthodontic research, 66(3), pp. 502-508. Elsevier 10.2186/jpr.JPR_D_21_00116
Eslemez Topcu, Eda; Şahin, Onur; Köroğlu, Ayşegül; Cömert, Füsun; Yilmaz, Burak (2022). Surface roughness and Streptococcus mutans adhesion on surface sealant agent coupled interim crown materials after dynamic loading. BMC Oral Health, 22(1), p. 299. BioMed Central 10.1186/s12903-022-02323-x
Sasany, Rafat; Yilmaz, Burak (2022). Effect of stain brand and shade on color stability of stains applied on a CAD-CAM feldspathic ceramic. Odontology, 110(3), pp. 452-459. Springer 10.1007/s10266-021-00676-3
Sert, Murat; Subaşı, Meryem Gülce; Donmez, Mustafa Borga; Çakmak, Gülce; Yilmaz, Burak (2022). Effect of firing cycle and aging on long-term chemical degradation of monolithic CAD-CAM ceramics. The journal of prosthetic dentistry, 128(1), 89.e1-89.e10. Elsevier 10.1016/j.prosdent.2022.04.028
Cakmak, Gulce; Rizzo Marques, Vinicius; Donmez, Mustafa Borga; Lu, Wei-En; Abou-Ayash, Samir; Yilmaz, Burak (2022). Comparison of measured deviations in digital implant scans depending on software and operato. Journal of dentistry, 122, p. 104154. Elsevier Science 10.1016/j.jdent.2022.104154
Cakmak, Gülce; Akay, Canan; Dönmez, Mustafa Borga; Mumcu, Emre; Akan, Handan Sevim; Sasany, Rafat; Abou-Ayash, Samir; Yilmaz, Burak (2022). Effect of Potassium Aluminum Sulfate Application on the Viability of Fibroblasts on a CAD-CAM Feldspathic Ceramic before and after Thermocycling. Materials, 15(12), p. 4232. Molecular Diversity Preservation International MDPI 10.3390/ma15124232
Cakmak, Gülce; Yilmaz, Hakan; Treviño Santos, Alejandro; Kökat, Ali Murat; Yilmaz, Burak (2022). Effect of Scanner Type and Scan Body Location on the Accuracy of Mandibular Complete-Arch Digital Implant Scans: An In Vitro Study. Journal of prosthodontics, 31(5), pp. 419-426. Wiley 10.1111/jopr.13418
Sert, Murat; Çakmak, Gülce; Subaşı, Meryem Gülce; Donmez, Mustafa Borga; Yilmaz, Burak (2022). Effect of different surface treatments and thermomechanical aging on the ion elution of CAD-CAM materials. The journal of prosthetic dentistry, 127(6), 926.e1-926.e10. Elsevier 10.1016/j.prosdent.2022.03.021
Deste Gokay, Gonca; Ozkir, Serhat Emre; Wolf, Thomas Gerhard; Gokcimen, Gulsum; Rona, Nergiz; Bicer, Mehmet; Yilmaz, Burak (2022). The Effect of Denture Cleansing Solutions on the Retention of Precision Attachments: An In Vitro Study. International journal of environmental research and public health, 19(7) MDPI 10.3390/ijerph19074345
Belgin, Hüseyin Berkay; Kale, Ediz; Özçelik, Tuncer Burak; Yilmaz, Burak (2022). Marginal fit of 3-unit CAD-CAM zirconia frameworks fabricated using cone beam computed tomography scans: an experimental study. Odontology, 110(2), pp. 339-348. Springer 10.1007/s10266-021-00668-3
Kırmalı, Ömer; Türker, Nurullah; Akar, Türker; Yilmaz, Burak (2022). Finite element analysis of stress distribution in autotransplanted molars. Journal of dentistry, 119, p. 104082. Elsevier Science 10.1016/j.jdent.2022.104082
Yilmaz, Burak; Rizzo Marques, Vinicius; Dönmez, Mustafa-Borga; Cuellar, Alfonso Rodriguez; Lu, Wei-En; Abou-Ayash, Samir; Cakmak, Gülce (2022). Influence of 3D analysis software on measured deviations of CAD-CAM resin crowns from virtual design file: an in-vitro study. Journal of dentistry, 118, p. 103933. Elsevier Science 10.1016/j.jdent.2021.103933
Donmez, Mustafa Borga; Rizzo Marques, Vinicius; Cakmak, Gülce; Yilmaz, Hakan; Schimmel, Martin; Yilmaz, Burak (2022). Congruence between the meshes of a combined healing abutment-scan body system acquired with four different intraoral scanners and the corresponding library file: an in vitro analysis. Journal of dentistry, 118, p. 103938. Elsevier Science 10.1016/j.jdent.2021.103938
Yilmaz, Burak; Diker, Emre; Ovchinnik, Valeriy; Abou-Ayash, Samir (2022). Management of a partially edentulous patient with idiopathic root resorption by using digital and conventional implant planning technologies. The journal of prosthetic dentistry, 127(1), pp. 15-21. Elsevier 10.1016/j.prosdent.2021.01.011
Jacobs, Nicholas; Seghi, Robert; Johnston, William M.; Yilmaz, Burak (2022). Displacement and performance of abutments in narrow-diameter implants with different internal connections. The journal of prosthetic dentistry, 127(1), pp. 100-106. Elsevier 10.1016/j.prosdent.2020.11.008
Weber, Adrian Roman; Yilmaz, Burak; Brägger, Urs; Schimmel, Martin; Abou-Ayash, Samir (2022). Relative amount of tooth structure removal in different partial- and full-crown preparation designs. The international journal of prosthodontics, 35(5), 666–675. Quintessence Publishing 10.11607/ijp.7049
Cevik, Pinar; Schimmel, Martin; Yilmaz, Burak (2022). New generation CAD-CAM materials for implant-supported definitive frameworks fabricated by using subtractive technologies. BioMed research international, 2022, p. 3074182. Hindawi Publishing Corporation 10.1155/2022/3074182
Rizzo Marques, Vinicius; Çakmak, Gülce; Yilmaz, Hakan; Abou-Ayash, Samir; Donmez, Mustafa Borga; Yilmaz, Burak (2022). Effect of Scanned Area and Operator on the Accuracy of Dentate Arch Scans with a Single Implant. Journal of clinical medicine, 11(14), p. 4125. MDPI 10.3390/jcm11144125
Çakmak, Gülce; Donmez, Mustafa Borga; Silva de Paula, Marcella; Akay, Canan; Chavan, Amit; Schimmel, Martin; Yilmaz, Burak (2022). Surface roughness and stainability of new‑generation denture base materials after brushing and coffee thermocycling (In Press). Journal of materials research Springer 10.1557/s43578-022-00798-6
Akar, Türker; Dündar, Ayşe; Kırmalı, Ömer; Üstün, Özlem; Kapdan, Alper; Er, Hakan; Kuştarcı, Alper; Er, Kürşat; Yilmaz, Burak (2021). Evaluation of the shear bond strength of zirconia to a self-adhesive resin cement after different surface treatment. Dental and medical problems, 58(4), pp. 463-472. Wroclaw Medical University 10.17219/dmp/135652
Cakmak, Gülce; Donmez, Mustafa Borga; Kashkari, Afnan; Johnston, William M; Yilmaz, Burak (2021). Effect of thickness, cement shade, and coffee thermocycling on the optical properties of zirconia reinforced lithium silicate ceramic. Journal of esthetic and restorative dentistry, 33(8), pp. 1132-1138. Wiley-Blackwell 10.1111/jerd.12808
Atalay, Sevda; Cakmak, Gülce; Dönmez, Mustafa-Borga; Yilmaz, Hakan; Kökat, Ali Murat; Yilmaz, Burak (2021). Effect of implant location and operator on the accuracy of implant scans using a combined healing abutment-scan body system. Journal of dentistry, 115(103855), p. 103855. Elsevier Science 10.1016/j.jdent.2021.103855
Yilmaz, Hakan; Eglenen, Merve Nur; Cakmak, Gülce; Yilmaz, Burak (2021). Effect of Impression Technique and Operator Experience on Impression Time and Operator-Reported Outcomes. Journal of prosthodontics, 30(8), pp. 676-683. Wiley 10.1111/jopr.13340
Abou-Ayash, Samir; Schimmel, Martin; Özcan, Mutlu; Oczelik, Burak; Brägger, Urs; Yilmaz, Burak (2021). Trueness and marginal fit of implant-supported complete-arch fixed prosthesis frameworks made of high-performance polymers and titanium: An explorative in-vitro study. Journal of dentistry, 113, p. 103784. Elsevier Science 10.1016/j.jdent.2021.103784
Cakmak, Gülce; Donmez, Mustafa Borga; Atalay, Sevda; Yilmaz, Hakan; Kökat, Ali Murat; Yilmaz, Burak (2021). Accuracy of single implant scans with a combined healing abutment-scan body system and different intraoral scanners: AAn in vitro study. Journal of dentistry, 113, p. 103773. Elsevier Science 10.1016/j.jdent.2021.103773
Wolf, Thomas Gerhard; Anderegg, Andrea Lisa; Yilmaz, Burak; Campus, Guglielmo Giuseppe (2021). Root Canal Morphology and Configuration of the Mandibular Canine: A Systematic Review. International journal of environmental research and public health, 18(19) MDPI 10.3390/ijerph181910197
Atalay, Sevda; Cakmak, Gülce; Fonseca, Manrique; Schimmel, Martin; Yilmaz, Burak (2021). Effect of thermocycling on the surface properties of CAD-CAM denture base materials after different surface treatments. Journal of the mechanical behavior of biomedical materials, 121, p. 104646. Elsevier 10.1016/j.jmbbm.2021.104646
Ozan, Oguz; Pekperdahci, Tolga; Kocyigit, Doruk; Yilmaz, Burak (2021). A Technique to Fabricate an Interim Implant-Supported Fixed Complete Denture for Immediate Loading. The journal of oral implantology, 47(4), pp. 318-323. American Association of Implant Dentistry 10.1563/aaid-joi-D-19-00374
Batak, Burcu; Çakmak, Gülce; Johnston, William M.; Yilmaz, Burak (2021). Surface roughness of high-performance polymers used for fixed implant-supported prostheses. The journal of prosthetic dentistry, 126(2), 254.e1-254.e6. Elsevier 10.1016/j.prosdent.2020.11.029
Yilmaz, Burak; Gouveia, Diogo; Rizzo Marques, Vinicius; Diker, Emre; Schimmel, Martin; Abou-Ayash, Samir (2021). The accuracy of single implant scans with a healing abutment-scanpeg system compared with the scans of a scanbody and conventional impressions: An in vitro study. Journal of dentistry, 110, p. 103684. Elsevier Science 10.1016/j.jdent.2021.103684
Yilmaz, Burak; Batak, Burcu; Seghi, Robert; Johnston, William M; Lang, Lisa A (2021). Effect of Crown Height on the Screw Stability of Titanium Screw-Retained Crowns. Journal of prosthodontics, 30(6), pp. 515-519. Wiley 10.1111/jopr.13352
Yilmaz, Burak; Rizzo Marques, Vinicius; Guo, Xiaohan; Gouveia, Diogo; Abou-Ayash, Samir (2021). The effect of scanned area on the accuracy and time of anterior single implant scans: an in vitro study. Journal of dentistry, 109, p. 103620. Elsevier Science 10.1016/j.jdent.2021.103620
Durkan, Rukiye; Şimşek, Hatice; Deste Gökay, Gonca; Yilmaz, Burak (2021). Effects of sintering time on translucency and color of translucent zirconia ceramics. Journal of esthetic and restorative dentistry, 33(4), pp. 654-659. Wiley-Blackwell 10.1111/jerd.12723
Sasany, Rafat; Ergun-Kunt, Goknil; Yilmaz, Burak (2021). Effect of mouth rinses on optical properties of CAD-CAM materials used for laminate veneers and crowns. Journal of esthetic and restorative dentistry, 33(4), pp. 648-653. Wiley-Blackwell 10.1111/jerd.12720
Yilmaz, Burak; Cakmak, Gülce; Batak, Burcu; Johnston, William M (2021). Screw stability of CAD-CAM titanium and zirconia abutments on different implants: An in vitro study. Clinical implant dentistry and related research, 23(3), pp. 373-379. Wiley 10.1111/cid.13001
Çakmak, Gülce; Subaşı, Meryem Gülce; Yilmaz, Burak (2021). Effect of thermocycling on the surface properties of resin-matrix CAD-CAM ceramics after different surface treatments. Journal of the mechanical behavior of biomedical materials, 117, p. 104401. Elsevier 10.1016/j.jmbbm.2021.104401
Molinero-Mourelle, Pedro; Cascos-Sanchez, Rocio; Yilmaz, Burak; Lam, Walter Yu Hang; Pow, Edmond Ho Nang; Del Río Highsmith, Jaime; Gómez-Polo, Miguel (2021). Effect of Fabrication Technique on the Microgap of CAD/CAM Cobalt-Chrome and Zirconia Abutments on a Conical Connection Implant: An In Vitro Study. Materials, 14(9) Molecular Diversity Preservation International MDPI 10.3390/ma14092348
Schimmel, Martin; Akino, Norio; Srinivasan, Murali; Wittneben, Julia-Gabriela; Yilmaz, Burak; Abou-Ayash, Samir (2021). Accuracy of intraoral scanning in completely and partially edentulous maxillary and mandibular jaws: an in vitro analysis. Clinical oral investigations, 25(4), pp. 1839-1847. Springer-Verlag 10.1007/s00784-020-03486-z
Batak, Burcu; Cakmak, Gülce; Seidt, Jeremy; Yilmaz, Burak (2021). Load to failure of high-density polymers for implant-supported fixed, cantilevered prostheses with titanium bases. The international journal of prosthodontics, 34(5), 608–614. Quintessence Publishing 10.11607/ijp.7036
Fiore, Adolfo Di; Monaco, Carlo; Brunello, Giulia; Granata, Stefano; Stellini, Edoardo; Yilmaz, Burak (2021). Automatic Digital Design of the Occlusal Anatomy of Monolithic Zirconia Crowns Compared to Dental Technicians' Digital Waxing: A Controlled Clinical Trial. Journal of prosthodontics - implant, esthetic, and reconstructive dentistry, 30(2), pp. 104-110. Blackwell 10.1111/jopr.13268
Tuna, Taskin; Yilmaz, Burak; Hermanns-Sachweh, Benita; Raith, Stefan; Wolfart, Stefan (2021). From a CAD/CAM-milled, allogeneic bone block to an implant-supported fixed partial denture with angulated screw channel: a case report. Quintessence international, 52(1), pp. 56-63. Quintessenz Verlags-GmbH 10.3290/j.qi.a45431
Kürkçüoğlu, Işın; Küçükeşmen, Hakkı Cenker; Ozkir, Serhat Emre; Yilmaz, Burak (2021). Effect of surface treatment on roughness and bond strength of CAD‐CAM multidirectional glass fiber‐reinforced composite resin used for implant‐supported prostheses. Polymer international, 70(8), pp. 1153-1158. Wiley 10.1002/pi.6173
Molinero-Mourelle, Pedro; Al-Haj Husain, Nadin; Abou-Ayash, Samir; Yilmaz, Burak; Iizuka, Tateyuki; Schimmel, Martin (2021). Single-visit chairside adjustment of a metal-acrylic resin implant-supported fixed complete dental prosthesis on an unloaded implant using a novel fixed attachment system: a case report. Journal of medical case reports, 15(1), p. 236. BioMed Central 10.1186/s13256-021-02854-x
Cakmak, Gülce; Cuellar, Alfonso Rodriguez; Donmez, Mustafa Borga; Schimmel, Martin; Abou-Ayash, Samir; Lu, Wei-En; Yilmaz, Burak (2021). Effect of Printing Layer Thickness on the Trueness and Margin Quality of 3D-Printed Interim Dental Crowns. Applied Sciences, 11(19), p. 9246. MDPI 10.3390/app11199246
Shokeen, Bhumika; Zamani, Leila; Zadmehr, Sara; Pouraghaie, Sevda; Ozawa, Ryotaro; Yilmaz, Burak; Lilak, Sam; Sharma, Shivani; Ogawa, Takahiro; Moshaverinia, Alireza; Lux, Renate (2021). Surface Characterization and Assessment of Biofilm Formation on Two Titanium-Based Implant Coating Materials. Frontiers in dental medicine, 2 Frontiers 10.3389/fdmed.2021.695417
Çakmak, Gülce; Yilmaz, Hakan; Aydoğ, Özge; Yilmaz, Burak (2020). Flexural strength of CAD-CAM and conventional interim resin materials with a surface sealant. The journal of prosthetic dentistry, 124(6), 800.e1-800.e7. Elsevier 10.1016/j.prosdent.2020.09.004
Forrer, Fiona Alena; Schnider, Nicole; Brägger, Urs; Yilmaz, Burak; Hicklin, Stefan Paul (2020). Clinical performance and patient satisfaction obtained with tooth-supported ceramic crowns and fixed partial dentures. The journal of prosthetic dentistry, 124(4), pp. 446-453. Elsevier 10.1016/j.prosdent.2019.08.012
Yue, Qin; Yilmaz, Burak; Abou-Ayash, Samir; Zimmermann, Patrick; Brägger, Urs; Schimmel, Martin (2020). Use of an attachment system with angulated abutments and polyetheretherketone inserts to retain a maxillary overdenture: A clinical report. The journal of prosthetic dentistry, 124(2), pp. 129-134. Elsevier 10.1016/j.prosdent.2019.07.013
Yilmaz, Burak; Alsaery, Amani; Altintas, Subutay H; Schimmel, Martin (2020). Comparison of strains for new generation CAD-CAM implant-supported crowns under loading. Clinical implant dentistry and related research, 22(3), pp. 397-402. Wiley 10.1111/cid.12894
Batak, Burcu; Yilmaz, Burak; Shah, Karnik; Rathi, Rajat; Schimmel, Martin; Lang, Lisa (2020). Effect of coded healing abutment height and position on the trueness of digital intraoral implant scans. The journal of prosthetic dentistry, 123(3), pp. 466-472. Elsevier 10.1016/j.prosdent.2019.06.012
Yilmaz, Burak; Schimmel, Martin; Zimmermann, Patrick; Janner, Simone (2020). Use of a New-Generation Mini-Implant and Attachment System for Fabrication of a Maxillary Overdenture. The international journal of prosthodontics, 33(5), pp. 576-581. Quintessence Publishing 10.11607/ijp.6544
