Lümkemann, Nina; Schönhoff, Lisa Marie; Buser, Ramona; Stawarczyk, Bogna (2020). Effect of Cleaning Protocol on Bond Strength between Resin Composite Cement and Three Different CAD/CAM Materials. Materials, 13(18) MDPI 10.3390/ma13184150
|
Text
materials-13-04150.pdf - Published Version Available under License Creative Commons: Attribution (CC-BY). Download (1MB) | Preview |
The present investigation tested the effect of the cleaning method on the tensile bond strength (TBS) between one resin composite cement (RCC) and three different computer aided design/computer aided manufacturing (CAD/CAM) materials, namely zirconia, lithium disilicate ceramic and resin composite. Ninety specimens were prepared from each CAD/CAM material (N = 270). The specimens were pre-treated respectively, divided into five subgroups and subjected to five different cleaning protocols, namely i. 37% phosphoric acid, ii. ethanol, iii. phosphoric acid + ethanol, iv. cleaning paste, v. distilled water. After cleaning, the specimens were either conditioned using a universal primer or a universal adhesive and bonded using a dual-curing RCC. After thermo-cycling (20,000x at 5 °C/55 °C), TBS and fracture patterns were evaluated. The data was analyzed using 1- and 2-way Analysis of Variance (ANOVA) with post-hoc Scheffé and partial eta-squared (ƞP²), Kruskal-Wallis, Mann-Whitney U and Chi2 tests (p < 0.05). The CAD/CAM material showed an impact on the BS while the cleaning protocol did not affect the results. Zirconia obtained the highest BS, followed by lithium-disilicate-ceramic. Resin composite resulted in the overall lowest BS. For most fracture patterns, the cohesive type occurred. All tested cleaning protocols resulted in same BS values within one CAD/CAM material indicating that the impact of the cleaning method for the restorative material seems to play a subordinate role in obtaining durable bond strength to resin composite cement. Further, it indicates that the recommended bonding protocols are well adjusted to the respective materials and might be able to compensate the impact of not accurately performed cleaning protocols.
Item Type: |
Journal Article (Original Article) |
|---|---|
Division/Institute: |
04 Faculty of Medicine > School of Dental Medicine > Department of Reconstructive Dentistry and Gerodontology |
UniBE Contributor: |
Buser, Ramona |
Subjects: |
600 Technology > 610 Medicine & health |
ISSN: |
1996-1944 |
Publisher: |
MDPI |
Language: |
English |
Submitter: |
Tina Lauper |
Date Deposited: |
05 Oct 2020 14:25 |
Last Modified: |
07 Aug 2024 15:45 |
Publisher DOI: |
10.3390/ma13184150 |
PubMed ID: |
32961873 |
Uncontrolled Keywords: |
CAD/CAM materials bond strength cleaning protocol lithium-disilicate resin composite zirconia |
BORIS DOI: |
10.7892/boris.146790 |
URI: |
https://boris.unibe.ch/id/eprint/146790 |
Actions (login required)
 |
Edit item |